Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:06:33.138Z Has data issue: false hasContentIssue false

On viscous film flows coating the interior of a tube: thin-film and long-wave models

Published online by Cambridge University Press:  07 May 2015

Roberto Camassa
Affiliation:
Carolina Center for Interdisciplinary Applied Mathematics, Department of Mathematics, University of North Carolina, Chapel Hill, NC 27599-3250, USA
H. Reed Ogrosky*
Affiliation:
Department of Mathematics, University of Wisconsin, Madison, WI 53706-1325, USA
*
†Email address for correspondence: ogrosky@math.wisc.edu

Abstract

A theoretical and numerical investigation of two classes of models for pressure-driven core–annular flow is presented. Both classes, referred to as ‘long-wave’ and ‘thin-film’ models, may be derived from a unified perspective using long-wave asymptotics, but are distinct from one another in the role played by the curved tube geometry with respect to the planar (limiting) case. Analytical and numerical techniques are used to show and quantify the significant differences between the behaviour of solutions to both model types. Temporal linear stability analysis of the constant solution is carried out first to pinpoint with closed-form mathematical expressions the different dynamical regimes associated with absolute or convective instabilities. Numerical simulations for the models are then performed and qualitative differences in the evolution of the free surface are explored. Mathematically, different levels of asymptotic accuracy are found to result in different regularizing properties affecting the long-time behaviour of generic numerical solutions. Travelling wave solutions are also studied, and qualitative differences in the topology of streamline patterns describing the flow of the film in a moving reference frame are discussed. These topological differences allow for further classification of the models. In particular, a transition from a regime in which waves trap a fluid core to one where waves travel faster than any parcel of the underlying fluid is documented for a variant of the primary model. In the corresponding thin-film model, no such transition is found to occur. The source of these differences is examined, and a comparison of the results with those of related models in the literature is given. A brief discussion of the merits of each class of models concludes this study.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.(a) Definition sketch of the flow variables. $\bar{R}$ denotes the location of the interface, $\bar{R}_{0}$ is the mean radius of the core region, $\bar{{\it\lambda}}$ is a typical free-surface wavelength, $(\bar{u},\bar{w})$ are the velocity components in the $(\bar{r},\bar{z})$ direction, and $g$ is acceleration due to gravity. (b) Velocity profile of the flat-interface exact solution to the governing equations. $\bar{h}_{0}$ is the mean thickness of the annular film.

Figure 1

Figure 2.(a) Growth rates of (LW-P) (solid lines) and (TF-P) (dashed lines) for two values of $a$. (b) Speed of linear perturbations as a function of $a$.

Figure 2

Figure 3.Shaded regions of $S$–$a$ parameter space indicating interfacial disturbances that are absolutely unstable for (TF-P) only (light grey) or both (LW-P) and (TF-P) (dark grey).

Figure 3

Figure 4.(a) Speed of an infinitesimal disturbance to (LW-PG) (solid line) and (TF-PG) (dashed line) for two values of $F$; (b) $F=F_{c_{LW}}$ (solid line) and $F=F_{c_{TF}}$ (dashed line) for (LW-PG) and (TF-PG) respectively, distinguishing between upwards and downwards flow of linear disturbances.

Figure 4

Figure 5.Shaded regions of $S$–$a$ parameter space indicating interfacial disturbances that are absolutely unstable for only one of (light grey) or both (dark grey) (LW-PG) and (TF-PG) for four different values of $F$ (1.0 (a), 2.5 (b), 5.0 (c), 7.5 (d)).

Figure 5

Figure 6.(a–c) Time snapshots showing the evolution of the free surface for (LW-P) in a periodic domain with (a) $S=1.8$ and $a=1.25$, (b) $S=11.25$ and $a=1.1$, and (c) $S=45$ and $a=1.05$. Free surface profiles are shown successively shifted at equal time intervals. Profiles are shown in the frame of reference moving with an undisturbed interface. (d) Solution to (TF-P) is shown for $\tilde{S}=0.3$, which corresponds to each combination of $S$ and $a$ used in (a)–(c). Shown below each snapshot is the initial condition $h(z,0)$; its scale is shown to the right in (d). Note the different time and amplitude scales of (d) with respect to the other panels.

Figure 6

Figure 7.Snapshots of a single wave growing according to the linear theory of (3.2) (dotted line) and the nonlinear model (LW-P) (solid line) at (a) $t=0$, 8.3, 16.7 and (b) $t=25$, 33.3, 41.7 with $S=11.25$ and $a=1.1$. (c) The amplitude (distance between wave crest and trough) of the linear theory and strongly nonlinear model. Circles correspond to the model solutions shown in (a) and (b).

Figure 7

Figure 8.(a) Maximum value of $h$ attained in travelling wave solutions of (LW-P) and (TF-P) for various values of $\tilde{S}$ and $a$. (b) Solutions to the long-wave model (LW-P) for $\tilde{S}=0.5$ are plotted (solid lines) for various values of $a$. The solution to the thin-film model (TF-P) for $\tilde{S}=0.5$ is plotted (dashed line). The crosses in (a) correspond to profiles shown in (b).

Figure 8

Figure 9.Various wavelength travelling wave solutions to (a) the long-wave model (LW-P) with $S=4.17$ and $a=1.25$, and (b) the thin-film model (TF-P) with $\tilde{S}=1.0$. The mean film thickness has been normalized to $h_{0}=1$.

Figure 9

Figure 10.(a) Travelling wave solution to the long-wave model (LW-P) and the thin-film model (TF-P) for $\tilde{S}=0.5$. (b) Contributions of the six terms $g_{i}(Z)$ for the thin-film model solution shown in (a). The inset shows the percentage contribution $e_{i}$ defined in (4.7). (c) Contributions of the six terms $g_{i}(Z)$ for the long-wave model solution shown in (a).

Figure 10

Figure 11.(a) Travelling wave solution to the long-wave model (LW-P) for $\tilde{S}=0.5$ and the thin-film model (TF-P) for $\tilde{S}=0.2$. (b) Contributions of the six terms $g_{i}(Z)$ for the thin-film model solution shown in (a). The inset shows the percentage contribution $e_{i}$ defined in (4.7). (c) Contributions of the six terms $g_{i}(Z)$ for the long-wave model solution shown in (a).

Figure 11

Figure 12.(a–c) Streamlines plotted in a travelling reference frame for solutions to the long-wave model (LW-P) for varying values of $S$ (0.4 (a), 0.7 (b), 1.1 (c)) and $a=1.25$. (d) Volume of the recirculation region as a function of $S$. For $a=1.25$, $S<0.6$, no recirculation region exists. Each cross corresponds to one of the three solutions shown.

Figure 12

Figure 13.(a–e) The same as figure 12(a–c) but for fixed $S=1$ and varying $a$ (1.35 (a), 1.32 (b), 1.25 (c), 1.14 (d), 1.04 (e)). (f) The volume of the recirculation region as a function of $a$. For thick films ($a>1.32$ when $S=1$) no recirculation region exists.

Figure 13

Figure 14.(a–c) The same as figure 12(a–c) but for (TF-P) ($S=0.4$ (a), 0.7 (b), 1.1 (c)). (d) The volume of the recirculation region as a function of $\tilde{S}$; every travelling wave has a non-zero volume of fluid inside a recirculation region.

Figure 14

Figure 15.Regions of $S$–$a$ parameter space where mass-transport waves or shear-enhancing waves exist for the long-wave model (LW-P).

Figure 15

Figure 16.(a) The total dimensionless flux $m\langle q^{(a)}\rangle$ for travelling wave solutions to (LW-P) with $a=1.25$. The volume fluxes due to the recirculation region $m\langle q_{r}^{(a)}\rangle$ and the substrate $m\langle q_{s}^{(a)}\rangle$ are shown as well. (b) Percentage of the total flux due to the recirculation region and substrate in (a).

Figure 16

Table 1.Summary of long-wave models.

Figure 17

Table 2.Summary of thin-film models.

Figure 18

Figure 17.The primary long-wave model (2.17)–(LW-PG) reduces to (2.20)–(LW-P) in the absence of gravity or to (5.1)–(LW-G) in the absence of pressure-driven core flow; the elimination of both forces results in (5.2)–(LW). Each long-wave model also corresponds to a thin-film model to which it reduces in the thin-film limit. The number of parameters governing the dynamics of each model is also shown.

Figure 19

Figure 18.Regions of $\tilde{S}^{\prime }$–$a$ parameter space where mass-transport waves and/or shear-enhancing waves were found numerically for model (LW-G).