Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T00:50:59.660Z Has data issue: false hasContentIssue false

Singularity of the water strider propulsion mechanisms

Published online by Cambridge University Press:  29 March 2021

Thomas Steinmann
Affiliation:
Institut de Recherche en Biologie de l'Insecte, IRBI UMR CNRS 7261 Tours, France
Antoine Cribellier
Affiliation:
Experimental Zoology Group, Wageningen University, Wageningen, The Netherlands
Jérôme Casas*
Affiliation:
Institut de Recherche en Biologie de l'Insecte, IRBI UMR CNRS 7261 Tours, France
*
†Email address for correspondence: jerome.casas@univ-tours.fr

Abstract

Our understanding of animal locomotion in air and water has progressed considerably, based on studies of their wakes. Wake vortices are the hallmarks of momentum transfer and enable an inverse inference of the forces applied by animals. Such approach has recently been extended to locomotion at the air–water interface, focusing on the familiar water striders and their dual hallmarks, surface capillary waves and bulk water vortices, produced by their paddling legs. However, the principal mechanisms of propulsion used in this type of locomotion remain a matter of debate. We confirm that the main force driving propulsion is the capillary force resulting from surface tension, and that interface relaxation makes a major contribution to the increase in vorticity of the water bulk. There is therefore no one-to-one mapping between forces and hallmarks in the fluid. Locomotion at the air–water interface for animals with virtual oars much larger than the size of their legs thus requires specific treatment outside the existing framework based on immersed propulsive appendices.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Water strider and virtual oar. (a) Photograph of Gerris palludum. (b) Illustration of the virtual oar geometry at $t=27$ ms during sculling in perspective view and projected in the ${(x,z)}$ and ${(y,z)}$ planes. The virtual oar is the leg-plus-dimple that pushes a much larger volume of water than the leg itself.

Figure 1

Figure 2.Four views of the experimental set-up of the TomoPIV. (a) Perspective view. (b) Upper view, projected in the $(x,y)$ plane. (c) Side view in the $(z,x)$ plan with a focus on the position of both the insect and the measurement domain in the water tank. (d) Face view in the $(z,y)$ plan. The TomoPIV measurement domain is represented in green.

Figure 2

Figure 3.Relative locations of the TomoPIV measurement volume and rowing insect for the two experiments on strider propulsion. (a–d) Local flow close to the leg representing sequential images of the propulsion of a water strider Gerris palludum taken from above by camera 5, the ensemble view camera in figure 2(d), at four instants, 0 ms, 10 ms, 15 ms and 25 ms. The green rectangle shows the TomoPIV measurement volume. The leg sculls principally along the $x$ axis. (e–h) Wave and flow in the wake representing sequential images of the wake behind the water strider at four instants, 0 ms, 20 ms, 35 ms and 45 ms.

Figure 3

Figure 4.(a) Experimental set-up of the mechanical simulation of a sculling leg. The mechanical leg is guided by a translation plate. The previously seeded flow and the air–water interface are illuminated by a laser sheet. The visualization of the temporal evolution of the topography of the interface and of the flow are carried out with the aid of a high-speed camera, placed perpendicularly to the laser plane. (b) Photography of the mechanical leg pushing down the air–water interface statically. A micromanipulator, placed on the translation plate, allows us to precisely position the leg on the interface. The static leg initially exerts pressure on the interface creating a meniscus. The blue line figures out the vertical cross-section of the initial deflection of the air–water interface. (c) Snapshot of the vertical cross-section of the seeded water flow and of the surface, as obtained by the high-speed camera. (d) Vertical cross-section of the velocity field obtained from PIV analysis and surface profile. (e) Diagram of the capillary force integrated over time and of the two potential hallmarks of momentum transfer during propulsion of a leg at the interface: the bow wave momentum and the vortex momentum.

Figure 4

Figure 5.Matrix of experiments with a mechanical leg in the velocity–depth parameter space. The filled points represent the velocity–depth values for which the interface remained unbroken for at least 30 ms after the start of the stroke. The empty points represent the experiments for which the interface broke prematurely.

Figure 5

Figure 6.Numerical simulation. Typical meshing with refinement around the leg and the air–water interface. The aspect ratio of the figure does not match the real one ($80 \times 11$ mm). The state shown here represents the initial condition of the equilibrium interface for a depth of stroke $h_l = 3$ mm. The free surface is represented in blue in the inset and its location is numerically determined where the phase field variable $\phi = 0$.

Figure 6

Figure 7.Three-dimensional movement of the sculling leg of the water strider. Successive locations of the water strider's leg in the $(x, y), (x, z)$ and $(y, z)$ planes. At 0 ms, the middle leg (in green ) begins its sculling movement. At 20 ms, it reaches its maximal depth (in blue). It then continues its trajectory, leaving the water at 30 ms (in red). The intermediate positions between these three instants are shown in grey. The two black dotted lines represent the trajectories of two extremities of the tarsal segments of the leg in contact with the air–water interface. The arrows on the lines indicate the directions of displacement.

Figure 7

Figure 8.Dynamics of surface topography and bulk flow at two instants, during the sculling phase (a.i), (a.ii) and (a.iii) as well as the surface relaxation phase (b.i), (b.ii) and (b.iii). (a.i) Three-dimensional snapshot representation of body position, surface topography and vorticity isosurface in the underlying fluid during the sculling phase ($\vert \omega \vert =150$ s$^{-1}$ at $t=20$ ms). The leg curving the interface is shown in red. The blue line represents the x-axis cross-section of the surface at $y=0$. (a.ii) Vertical cross-section of the air–water interface and the flow velocity field. This cross-section is located on a line crossing the middle of the leg. The position of the leg is indicated in red, and the blue line shows the local elevation of the water surface along a plane crossing the middle of the leg tarsi. The green area is the isosurface of vorticity along the $y$ axis. The vertical circulation of the vortex ($\varGamma _v$) is estimated by integrating the vorticity over this area. The radius of the semi-annular vortex is defined as the distance between the leg and the vortex core. (a.iii) Flow velocity field in the fluid at the interface. The estimated position of the leg is indicated as a dotted red line. The two counter-rotating cylinders typical of a dipolar vortex are visible. The red area is the isosurface of vorticity along the $z$ axis. The vertical circulation of the two vortices ($\varGamma _h-$ and $\varGamma _h+$) was estimated by integrating the vorticity over the surface flow. (b.i) Snapshot of body position, surface topography and isosurface of vorticity in the underlying fluid during the wave relaxation phase ($\vert \omega \vert =150$ s$^{-1}$ at $t=35$ ms). (b.ii) and (b.iii) are similar to (a.ii) and (a.iii), except that the leg has been lifted from the surface.

Figure 8

Figure 9.(a) Water bulk dynamics in the wake, after water strider propulsion during the passage of the wave. Relative positions of the insect and measurement volume at $t=40$ ms. The cross-sections of the velocity field along the $(x,z)$ planes are represented at 3 locations along y axis. The isosurface colours correspond to the vorticity along $y$, in blue $\omega _y=-20\ \textrm {s}^{-1}$ and in red $\omega _y=20\ \textrm {s}^{-1}$. (b) Visualization of the convection of the semi-annular vortex at $t=470$ ms. The water strider then leaves the field of view. The isosurface colours correspond to the absolute vorticity in red $\vert \omega \vert =12\ \textrm {s}^{-1}$.

Figure 9

Figure 10.(a) Change in horizontal $p_v^{h}$ (red points) and vertical $p_v^{v}$ (green points) momentum of the vortex, and interface energy $E_s$ (black points). These estimated values are derived from the TomoPIV data presented in panels (a,b) of figure 8. (b) Dynamics of kinetic energy in the bulk fluid wake after the propulsion of the water strider. This kinetic energy in the wake is integrated into the measurement volume. These estimated values are derived from the TomoPIV data presented in panels (a,b) of figure 9.

Figure 10

Figure 11.Mechanical and numerical simulations of the transverse motion of a model leg. Comparison between experiments and numerical simulations of the dynamics of the interface and underlying flow; $h_l=0.95$ mm and $V_l=67$ cm s$^{-1}$. The leg diameter was 100 $\mathrm {\mu }$m in the experiments and was 200 $\mathrm {\mu }$m in the simulations.

Figure 11

Figure 12.Comparison between experiments and numerical simulations of a sculling leg at the air–water interface. For each measurement and simulation in (a) and (b), the estimation and comparison are done at ${\rm \Delta} t=30$ ms after the start of the translation. (a) Influence of the velocity of stroke $V_l$ on forces and momentum contributions at fixed depth $h_l=0.95$ mm. (b) Influence of depth of stroke on forces and momentum contributions at fixed velocity $V_l=23$ cm s$^{-1}$. (c) Changes in momentum transfer ratios between the bow wave and vortex as a function of sculling depth, for numerical computations and mechanical experiments. (d) Changes in momentum transfer ratios between the bow wave and vortex as a function of leg velocity, for numerical computations and mechanical experiments. Numerical values are available in SI figures S2 and S3.

Figure 12

Figure 13.Temporal evolution of the viscous ($\boldsymbol {F_v}$), pressure ($\boldsymbol {F_p}$) and capillary ($\boldsymbol {F_s}$) forces produced according to the computation of two numerical simulations. (a) Temporal evolution of the three forces for a leg sculling at $V_l=23$ cm s$^{-1}$ and $h_l=2.75$ mm. (b) Temporal evolution of the air–water interface and vorticity in the water for a leg sculling at $V_l=23$ cm s$^{-1}$ and $h_l=2.75$ mm. (c) Temporal evolution of the three forces for a leg sculling at $V_l=67$ cm s$^{-1}$ and $h_l=0.95$ mm. (d) Temporal evolution of the air–water interface and vorticity in the water for a leg sculling at $V_l=67$ cm s$^{-1}$ and $h_l=0.95$ mm.

Figure 13

Figure 14.Analysis of forces and hallmarks for numerical simulations of the transverse motion of a model leg. Panels (a,b) were generated from an analysis of the results of numerical simulations of the interface and fluid for sculling legs. We performed 25 simulations for 25 combinations of velocity (10, 18, 23, 30, 40 cm s$^{-1}$) and depth (0.1, 0.3, 0.95, 1.75, 2.75 mm). The dividing lines in (a) and (b) indicate an equal balance between the forces and energy spent, respectively. (a) Relative contributions of the drag forces (the sum of viscous ($\boldsymbol {F_v}$) and pressure ($\boldsymbol {F_p}$) forces) and the capillary force $\boldsymbol {F_s}$. We show the ratio of forces in the space delimited by the depth of sculling and leg velocity. We indicate by a vertical dotted line the minimal gravity–capillary wave velocity of 23 cm s$^{-1}$. (b) Ratio of the energy used to deform the surface to the energy used to move the fluid. This figure is based on an analysis of potential, curvature and kinetic energies (at $t=15$ ms).

Figure 14

Figure 15.Change in vortex circulation with capillary force acting on the leg contact line. The inset represents the change in vortex circulation with the pressure drag force acting on the leg surface. This figure is based on the analysis of vortex circulation derived from numerical simulations. The data points were obtained from an analysis of the results of numerical simulations of the interface and fluid for sculling legs. We performed 25 simulations for 25 combinations of velocity (10, 18, 23, 30, 40 cm s$^{-1}$) and depth (0.1, 0.3, 0.95, 1.75, 2.75 mm).

Figure 15

Figure 16.Numerical simulation of the pressure force acting on the moving dimple resulting from the displacement of a leg at a depth of $h_l=1.75$ mm and a velocity of $V_l=30$ cm s$^{-1}$. This figure illustrates the equivalence between the magnitude of the capillary force $F_s$ acting on the leg and the magnitude of the drag pressure force $F_p^{dimple}$ acting on the dimple. The presence of a zone of high pressure ($\boldsymbol {\nabla } p = 60$ Pa) in the 2 mm high bow wave indicates that the pressure force acts essentially on this part of the virtual oar, where the bow wave appears. The resulting pressure drag force (per unit length) can be obtained by multiplying this pressure by the height of the wave to obtain $F_p^{dimple}=0.120$ N m$^{-1}$.

Supplementary material: File

Steinmann et al. supplementary material

Steinmann et al. supplementary material

Download Steinmann et al. supplementary material(File)
File 1.6 MB