Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T19:15:46.956Z Has data issue: false hasContentIssue false

Fabrication of Self-Assembling AlGaN Quantum Dot on AlGaN Surfaces Using Anti-Surfactant

Published online by Cambridge University Press:  13 June 2014

H. Hirayama
Affiliation:
The Institute of Physical and Chemical Research (RIKEN), 2-1 Hirosawa, Wako-shi, Saitama, 351-0198, Japan, hirayama@postman.riken.go.jp
Y. Aoyagi
Affiliation:
The Institute of Physical and Chemical Research (RIKEN), 2-1 Hirosawa, Wako-shi, Saitama, 351-0198, Japan, hirayama@postman.riken.go.jp
S. Tanaka
Affiliation:
Hokkaido University, Kita-ku, Sapporo 060, Japan

Abstract

We report on the first artificial fabrication of self-assembling AlGaN quantum dots (QDs) on AlGaN surfaces using metal organic chemical vapor deposition (MOCVD). The AlGaN QDs are fabricated using a growth mode change from 2-dimensional step-flow growth to 3-dimensional island formation by modifying the AlGaN surface energy with Si anti-surfactant. The average lateral size and the thickness of fabricated AlGaN QDs, as determined by AFM, are approximately 20 nm and 6nm, respectively. The dot density was found to be controlled from 5×1010 cm−2 down to 2×109 cm−2 by increasing the dose of Si anti-surfactant. We obtained the photoluminescence (PL) from AlGaN QDs embedded with Al0.38Ga0.62N capping layers. The Al incorporation in AlGaN QDs was controllable within the range of 1-5 %.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig.1.Schematic view of fabricated AlGaN quantum dot sample.

Figure 1

Fig.2.A Step-flow image of the surface of Al0.05Ga0.95N quantum film grown without using anti-surfactant at 900°C observed by AFM.

Figure 2

Fig. 3(a)-(d).AFM images just after the growth of Al0.05Ga0.95N on Si deposited surfaces. The growth temperature Tg and the Si-dose amount are (a)1100°C and 0.04μmol, (b)1100°C and 0.2μmol, (c)900°C and 0.04μmol, and (d)900°C and 0.2μmol.

Figure 3

Fig. 4.77K PL spectra from AlGaN QDs with capping layers fabricated at 900°C for various TMAl flow rate.