Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:01:12.553Z Has data issue: false hasContentIssue false

AlN Wafers Fabricated by Hydride Vapor Phase Epitaxy

Published online by Cambridge University Press:  13 June 2014

Andrey Nikolaev
Affiliation:
Ioffe Institute and Crystal Growth Research Center, St. Petersburg, 194021 Russia
Irina Nikitina
Affiliation:
Ioffe Institute and Crystal Growth Research Center, St. Petersburg, 194021 Russia
Andrey Zubrilov
Affiliation:
Ioffe Institute and Crystal Growth Research Center, St. Petersburg, 194021 Russia
Marina Mynbaeva
Affiliation:
Ioffe Institute and Crystal Growth Research Center, St. Petersburg, 194021 Russia
Yuriy Melnik
Affiliation:
TDI, Inc., Gaithersburg, MD 20877, USA.
Vladimir Dmitriev
Affiliation:
TDI, Inc., Gaithersburg, MD 20877, USA.

Abstract

We report on AlN wafers fabricated by hydride vapor phase epitaxy (HVPE). AlN thick layers were grown on Si substrates by HVPE. Growth rate was up to 60 microns per hour. After the growth of AlN layers, initial substrates were removed resulting in free-standing AlN wafers. The maximum thickness of AlN layer was about 1 mm. AlN free-standing single crystal wafers with a thickness ranging from 0.05 to 0.8 mm were studied by x-ray diffraction, transmission electron microscopy, optical absorption, and cathodoluminescence.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Schematic view of HVPE growth reactor.

Figure 1

Figure 2.Photo of free-standing AlN wafer.

Figure 2

Figure 3.Surface morphology of AlN free-standing wafer: a) As-grown surface;b) Former interface.

Figure 3

Figure 4a.X-ray rocking curve measured at ω-scan for AlN free-standing wafer.

Figure 4

Figure 4b.X-ray rocking curve measured at ω-2Θ–scan for AlN free-standing wafer.

Figure 5

Fig. 5.IR transmission spectra (300K) for free standing AlN samples:1 - thickness is 0.05 mm, α = 17 cm−1;2 - thickness is 0.08 mm, α = 20cm−1;3 - thickness is 0.3 mm, α = 15 cm−1.3a - thickness is 0.29 mm, α = 20 cm−1.4 - thickness is 0.49 mm, α = 22 cm−1.