Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T02:47:32.136Z Has data issue: false hasContentIssue false

Viscoplastic boundary layers

Published online by Cambridge University Press:  26 January 2017

N. J. Balmforth
Affiliation:
Department of Mathematics, University of British Columbia, Vancouver, BC V6T 1Z2, Canada
R. V. Craster
Affiliation:
Department of Mathematics, Imperial College London, London SW7 2AZ, UK
D. R. Hewitt*
Affiliation:
Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA, UK
S. Hormozi
Affiliation:
Department of Mechanical Engineering, Ohio University, Athens, OH 45701-2979, USA
A. Maleki
Affiliation:
Department of Mechanical Engineering, University of British Columbia, Vancouver, BC V6T 1Z4, Canada
*
†Email address for correspondence: drh39@cam.ac.uk

Abstract

In the limit of a large yield stress, or equivalently at the initiation of motion, viscoplastic flows can develop narrow boundary layers that provide either surfaces of failure between rigid plugs, the lubrication between a plugged flow and a wall or buffers for regions of predominantly plastic deformation. Oldroyd (Proc. Camb. Phil. Soc., vol. 43, 1947, pp. 383–395) presented the first theoretical discussion of these viscoplastic boundary layers, offering an asymptotic reduction of the governing equations and a discussion of some model flow problems. However, the complicated nonlinear form of Oldroyd’s boundary-layer equations has evidently precluded further discussion of them. In the current paper, we revisit Oldroyd’s viscoplastic boundary-layer analysis and his canonical examples of a jet-like intrusion and flow past a thin plate. We also consider flow down channels with either sudden expansions or wavy walls. In all these examples, we verify that viscoplastic boundary layers form as envisioned by Oldroyd. For each example, we extract the dependence of the boundary-layer thickness and flow profiles on the dimensionless yield-stress parameter (Bingham number). We find that, while Oldroyd’s boundary-layer theory applies to free viscoplastic shear layers, it does not apply when the boundary layer is adjacent to a wall, as has been observed previously for two-dimensional flow around circular obstructions. Instead, the boundary-layer thickness scales in a different fashion with the Bingham number, as suggested by classical solutions for plane-parallel flows, lubrication theory and, for flow around a plate, by Piau (J. Non-Newtonian Fluid Mech., vol. 102, 2002, pp. 193–218); we rationalize this second scaling and provide an alternative boundary-layer theory.

Information

Type
Papers
Copyright
© 2017 Cambridge University Press 
Figure 0

Figure 1.Sketches of the four model problems: (a) a jet-like intrusion from an inlet in a wall into a stagnant half-space, (b) flow past a thin plate moving in the direction of its length (with a finite plate shown in the main panel and a sketch of the semi-infinite knife overlaid), (c) channel flow through a sudden rectangular expansion and (d) flow down a wavy-walled conduit. Except for the semi-infinite knife, the sketches actually show the yield surfaces of solutions computed at high Bingham number (relatively large yield stress).

Figure 1

Figure 2.(a) Profile of the self-similar boundary-layer solution for $N=1$ (Bingham fluid) plotted against $\unicode[STIX]{x1D70D}=(s-s_{0})[\unicode[STIX]{x1D706}(\unicode[STIX]{x0394}U)^{N}/(2NY_{E}^{N+2})]^{1/2}$, with $Y=0$ for $s=s_{0}$ and $(Y,Y^{\prime })=(Y_{E},0)$ at the right (solid); the solution can be continued to form a closed boundary layer as indicated by the dashed line. The dotted line shows $Y$ against $\sqrt{3\unicode[STIX]{x0394}U}(s-s_{0})/2$, which is Oldroyd’s power-law solution ($N=1$; $Y_{E}\gg 1$). (b) Boundary-layer profiles for $N=0.1$, 0.5, 1, 2 and 4, plotted against $\unicode[STIX]{x1D70D}/\unicode[STIX]{x1D70D}_{max}$.

Figure 2

Figure 3.(a) Numerical solutions for a one-sided intrusion at $Bi=1024$, with a symmetry line at $x=1$, showing (from left to right) $\log _{10}(\dot{\unicode[STIX]{x1D6FE}})$, $u$ and $v$. The yield surface is shown as a green line. (b) The thickness of the shear layer at $x=1$ (dots), together with the asymptotic prediction (3.16) (dashed). (c) The yield surface (black) together with the prediction $Y/Bi^{1/3}$ (red, dashed) from the boundary-layer asymptotics. (d) Horizontal velocity profiles at $x=1$ (black) and $x=0.25$ (blue), together with the predicted profiles from the boundary-layer theory (circles).

Figure 3

Figure 4.Intrusions for (a) $y_{I}=2^{-1}$, (b) $y_{I}=2^{-2}$ and (c) $y_{I}=2^{-4}$, all with $Bi=2048$ and showing only the upper half of the domain owing to symmetry at $y=0$. Each row shows density plots of $\log _{10}(\dot{\unicode[STIX]{x1D6FE}})$ (left), $u(x,y)$ (centre) and $v(x,y)$ (right); the dotted (white) lines show a selection of streamlines and the solid (green) line shows the yield surfaces. (d)  The same set of plots for $y_{I}=2^{-4}$ and $Bi=8$; the flow is similar to the larger-$Bi$ solutions, but without distinct shear layers. (e–h) Yield surfaces for the same inlet widths as (a–c), together with the borderline case at $y_{I}=0.4$, for $Bi=32$ (solid), $Bi=128$ (dashed), $Bi=512$ (▫) and $Bi=2048$ (○).

Figure 4

Figure 5.The (a,c) yield surfaces and (b,d) vertical profiles of horizontal velocity at $x=1$, for intrusion with $Bi=2048$ and inlet half-widths of (a,b) $y_{I}=0.5$ and (c,d) $y_{I}=2^{-4}$. Solid lines show the numerical solutions; dashed lines give the predicted boundary-layer shape $Y(y)$, based on the measured velocity jump and centre line of the shear layers, and blue circles give the predicted velocity profiles from (3.13). (e) The thickness of the boundary layer at $x=1$ for $y_{I}=0.5$ (○) and $y_{I}=2^{-4}$ (*), together with the predictions from (3.16) using the measured velocity jumps (red solid line and blue dashed line, respectively), which asymptotically scale with $Bi^{-1/3}$. (f) The axial length (○) and half-thickness (*) of the plugged intrusion and the position of the tip of the triangular plug at the inlet ($+$), for $y_{I}=2^{-4}$.

Figure 5

Figure 6.Further details of the stress field for the intrusion with $y_{I}=2^{-4}$ and $Bi=2048$, which was shown in figure 4(c): density plots of (a) $\unicode[STIX]{x1D70F}_{xx}/Bi$, (b) $\unicode[STIX]{x1D70F}_{xy}/Bi$ and (c) $\unicode[STIX]{x1D70F}/Bi$. In view of the indeterminacy of the stress field over the rigid parts of the flow, the plugs are shaded grey.

Figure 6

Figure 7.Sliplines for the jet ($\unicode[STIX]{x1D6FC}$-lines shown darker (blue), $\unicode[STIX]{x1D6FD}$-lines lighter (red)). The stars show where $\unicode[STIX]{x1D6FD}$-lines become vertical. The upper inset shows the sliplines over a larger region of the first quadrant, including more of the sliplines leaving the $y$-axis above the fan. The lower insets show particular choices for the slipline and boundary layer that permit moving plugs bounded by $\text{BCD}$.

Figure 7

Figure 8.Slipline fields, with the plastic region bounded by the thicker sliplines and triangular face of the jet, superposed on density maps of $\log _{10}(\dot{\unicode[STIX]{x1D6FE}})$ with $Bi=2048$ from the numerical solutions, for inlet widths (a) $y_{I}=2^{-2}$, (b) $y_{I}=2^{-4}$ and (c) $y_{I}=2^{-6}$.

Figure 8

Figure 9.Plot of (a) $y_{C}/y_{I}$ and $(x_{D}-x_{C})/y_{I}$ against $x_{C}/y_{I}$, then (b) $y_{C}/x_{D}$ and (c) $x_{B}/x_{D}$, both against $y_{I}/x_{D}$. The lines show the slipline solutions and the symbols, which correspond to different values of $Bi$ as indicated, show the numerical solutions. See figure 7 for the locations of A, B, C and D.

Figure 9

Figure 10.Flow around a plate of unit length for (a) $Bi=32$ and (b) $Bi=2048$, showing density maps of $\log _{10}(\dot{\unicode[STIX]{x1D6FE}})$. The dashed line locates the plate, which is moving from left to right with unit speed. (c,d) Density maps of the corresponding horizontal velocity component (displaying one quarter of the plane due to symmetry) for (c) $Bi=32$ and (d) $Bi=2048$. Dashed white lines show a selection of streamlines. The inset in (d) shows a magnification of the boundary-layer flow against the plate, as indicated by the box of the main panel. (e,f) The normal and shear stress components, respectively, scaled by $Bi$, for $Bi=2048$.

Figure 10

Figure 11.Data as a function of $Bi$. (a) Boundary-layer width at $x=0$ for the layer against the plate ($\ast$) and for the circular shear layer (red $+$). (b) Characteristic lengths of the plastic region: horizontal length in front of the tip of the plate $x_{a}-(1/2)$ ($\ast$); maximum height $y_{b}$ of the stress discontinuity above the plate (blue $\circ$); and maximum height $y_{p}$ of the plastic region (red $+$). (c) Properties of the rotating plugs as defined in (5.11a,b): $y_{c}$ ($\ast$); $R-y_{c}-(1/2)$ (blue $\circ$); and $Bi^{-1/2}\unicode[STIX]{x1D6FA}$ (red $+$). The dashed lines show $Bi^{-1/2}$ and the (blue) circles in (a) plot the prediction in (5.10).

Figure 11

Figure 12.Features of the flow near the front of the plate (black dashed) for $Bi=2048$. (a) Sliplines (contours of $p\pm 2Bi\unicode[STIX]{x1D717}$), as calculated from the numerical solutions, overlain on a density map of $\log _{10}\dot{\unicode[STIX]{x1D6FE}}$. Grey regions indicate rigid plugs. (b) The centre of rotation (stars) and one quarter of the arc of rotation (dashed), for the counter-rotating plugs above and below the plate.

Figure 12

Figure 13.(a) Horizontal velocity profiles at $x=0$ for $Bi=32$ (black), $Bi=128$ (blue dashed), $Bi=512$ (red squares) and $Bi=2048$ (green circles). The inset shows the velocity across the rigid plug and outer circular boundary layer in more detail. (b,c) Details of the numerical solution for $Bi=2048$: (b) the yield surface (black solid) and a contour of $\dot{\unicode[STIX]{x1D6FE}}=1$ (red dashed), which approximately demarcates the edge the viscoplastic boundary layer; and (c) the horizontal velocity profile at $x=0$. Circles show the asymptotic predictions from (5.9), (5.4) and (5.10), using the measured values of $\unicode[STIX]{x1D6FA}$, $R$ and $y_{c}$.

Figure 13

Figure 14.Periodic channel flow through a local expansion at $0 with unit net flux down the channel and $Bi=2048$. Density maps of (a) $\log _{10}\dot{\unicode[STIX]{x1D6FE}}$; (b) the horizontal velocity; and (c) the vertical velocity. The dashed (white) lines show a selection of streamlines and the solid (green) line shows the yield surfaces.

Figure 14

Figure 15.Data for channel flow through an expansion. (a) Yield surfaces for $Bi=128$ (black), $Bi=512$ (blue dashed), $Bi=2048$ (red) and $Bi=8192$ (green dashed). (b) The yield surface (black) and the asymptotic prediction (○) from (3.13) for $Bi=2048$. (c) The width of the free shear layer (blue pluses; measured at $x=0.5$) and the wall-bounded layer (black stars; measured at $x=-0.5$), together with dashed lines showing asymptotic predictions from (3.16), with scaling $Bi^{-1/3}$, and (6.3), with scaling $Bi^{-1/2}$, respectively. (d) Measured (lines) and predicted (symbols) profiles of the horizontal velocity $u(y)$ across the wall-bounded (black circles) and free (blue stars) shear layers.

Figure 15

Figure 16.Solutions for periodic flow down a channel with boundaries located at $y=\pm (1+a\sin (\unicode[STIX]{x03C0}x))$, for different amplitudes $a$ and $Bi=2048$ (only a part of the domain is shown). Density plots of $\log (\dot{\unicode[STIX]{x1D6FE}})$ (left), $u$ (centre) and $v$ (right), for amplitudes (a) $a=0.5$, (b) $a=0.7$, (c) $a=0.8$ and (d) $a=0.9$. Streamlines (white dashed) and yield surfaces (green solid) are also shown in the plots of the velocity components.

Figure 16

Figure 17.Data from computations with amplitude $a=0.5$. (a) Yield surfaces for $Bi=512$ (black), $Bi=2048$ (blue dashed) and $Bi=8192$ (red). (b) The yield surface (black) and the asymptotic prediction (○) from (3.13) for $Bi=2048$. (c) The width of the free shear layer (blue pluses; measured at $x=0.5$) and of the wall-bounded layer (black stars; measured at $x=-0.5$), together with the asymptotic prediction (blue dashed line) from (3.16), with scaling $Bi^{-1/3}$, and the predicted scaling for the wall layer of $Bi^{-7/12}$ (black dashed line). (d) Profiles of the horizontal velocity $u(y)$ at $x=-0.5$ (black) and $x=0.5$ (blue), together with the asymptotic prediction for the free shear layer (blue stars).