Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T14:39:28.482Z Has data issue: false hasContentIssue false

Minimal surfaces on mirror-symmetric frames: a fluid dynamics analogy

Published online by Cambridge University Press:  19 June 2020

Mars M. Alimov
Affiliation:
Kazan Federal University, Kazan420008, Russia
Alexander V. Bazilevsky
Affiliation:
Ishlinsky Institute for Problems in Mechanics of the Russian Academy of Sciences, Moscow 119526, Russia
Konstantin G. Kornev*
Affiliation:
Department of Materials Science and Engineering, Clemson University, Clemson, SC 29634-0971, USA
*
†Email address for correspondence: kkornev@clemson.edu

Abstract

Chaplygin’s hodograph method of classical fluid mechanics is applied to explicitly solve the Plateau problem of finding minimal surfaces. The minimal surfaces are formed between two mirror-symmetric polygonal frames having a common axis of symmetry. Two classes of minimal surfaces are found: the class of regular surfaces continuously connecting the supporting frames forming a tube with complex shape; and the class of singular surfaces which have a partitioning film closing the tube in between. As an illustration of the general solution, minimal surfaces supported by triangular frames are fully described. The theory is experimentally validated using soap films. The general solution is compared with the known particular solutions obtained by the Weierstrass inverse method.

Information

Type
JFM Papers
Copyright
© The Author(s), 2020. Published by Cambridge University Press
Figure 0

Figure 1.(a) The catenoid is a classical minimal surface formed by a soap film between two coaxial circular wire rings of 25 mm diameter. (b) Soap film supported by two triangular equilateral wire frames with the 25 mm long side. (c) Soap films can form complex periodic structures such as those shown here using the triangular frames from (b). (d) Minimal surface on the L-shaped frame ($20\times 20\times 50~\text{mm}$) analytically described by Chaplygin. (e) An example illustrating the construction of a TPMS taking (b) as a generator and rotating the obtained minimal surface about the sides of the triangle by $180^{\circ }$. First, from a single generating cell one obtains a double-cell structure. Then, one forms a hexagonal cell using the double-cell constructs; see the movie in the supplementary material available online at https://doi.org/10.1017/jfm.2020.391. This hexagonal cell is used to generate a TPMS. (f) The side and top views of the obtained periodic cell of TPMS.

Figure 1

Figure 2.(a) Schematic of a minimal surface supported by two parallel frames $A_{1}A_{2}A_{3}$ and $A_{1}^{\prime }A_{2}^{\prime }A_{3}^{\prime }$. The surface $\unicode[STIX]{x1D6F4}$ is mirror symmetric with respect to the midplane passing through point $O^{\prime }$. The dashed curve shows the contour of a neck $\unicode[STIX]{x1D6E4}$ of this minimal surface, the plane $O^{\prime }CD$ is parallel to the planes $A_{1}A_{2}A_{3}$ and $A_{1}^{\prime }A_{2}^{\prime }A_{3}^{\prime }$. The dashed lines $DA_{1}$ and $CB$ mark the $\unicode[STIX]{x1D6F4}$ fundamental patch of symmetry: the entire surface is obtained by the mirror-symmetric reflections of surface $A_{1}BCDA_{1}$ with respect to vertical planes, formed by the medians of triangular frames as well as with respect to the horizontal plane $O^{\prime }CD$. The vector $\boldsymbol{N}$ is an outward unit normal vector to the surface $\unicode[STIX]{x1D6F4}$ at any point on the surface and the vector $\boldsymbol{J}$ is the $xy$-projection of vector $\boldsymbol{N}$. (b) Schematic of a minimal surface supported by two parallel frames $A_{1}A_{2}A_{3}$ and $A_{1}^{\prime }A_{2}^{\prime }A_{3}^{\prime }$; the surface is partitioned by a lamella $\unicode[STIX]{x1D6F4}_{3}$ – a flat film supported by the Plateau ring $\unicode[STIX]{x1D6E4}$. This lamella belongs to the plane $O^{\prime }CD$. Two surfaces $\unicode[STIX]{x1D6F4}_{1}$ and $\unicode[STIX]{x1D6F4}_{2}$ are mirror symmetric with respect to plane $O^{\prime }CD$ and they meet at ring $\unicode[STIX]{x1D6E4}$ forming $2\unicode[STIX]{x03C0}/3$ angle. (c) Projection of $1/12$ of the surface $\unicode[STIX]{x1D6F4}$, $A_{1}BCDA_{1}$, on the $xy$-plane. The shaded area $A_{1}BCDA_{1}$ can be considered as the shadow of the minimal surface when the light is shining parallel to the $z$-axis; $|A_{1}B|=|A_{3}B|$. For any equilateral polygons, the angle $\unicode[STIX]{x1D6FD}_{n}$ in the right triangle $OA_{1}B$ at the centroid $O$, is $\unicode[STIX]{x1D6FD}_{n}=\unicode[STIX]{x03C0}/n$, $n\geqslant 3$. The vector $\boldsymbol{J}$, the projection of normal vector $\boldsymbol{N}$ on the $xy$-plane is specified by the angle $\unicode[STIX]{x1D703}$ formed by $\boldsymbol{J}$ and the $x$-axis. The direction of vector $\boldsymbol{J}$ is completely specified at the sides of polygon $A_{1}BCDA_{1}$, but its direction is unknown at the neck contour $\unicode[STIX]{x1D6E4}$, except it is known that $\boldsymbol{J}$ is perpendicular to $\unicode[STIX]{x1D6E4}$.

Figure 2

Figure 3.(a) The fundamental rectangular domain of the complex potential $W$ corresponding to the fundamental symmetry patch of a minimal surface. (b) The flux hodograph $\unicode[STIX]{x1D712}$ for a regular surface $\unicode[STIX]{x1D6F4}$. (c) The flux hodograph $\unicode[STIX]{x1D712}$ for a surface with a lamella as shown in figure 2(c).

Figure 3

Figure 4.Auxiliary domains (a) $\unicode[STIX]{x1D6FA}_{\unicode[STIX]{x1D701}}$, (b) $\unicode[STIX]{x1D6FA}_{u}$, (c) $\unicode[STIX]{x1D6FA}_{\unicode[STIX]{x1D714}}$ used to find conformal maps $\unicode[STIX]{x1D712}\rightarrow \unicode[STIX]{x1D701}\rightarrow W$.

Figure 4

Figure 5.Plots of $R_{D}$, $R_{C}$ as functions of $H$ for the cases without lamella, (a) $n=3$, (b) $n=4$, (c) $n=5$, (d) the case with lamella separating the surface supported by triangular frames. The solid lines correspond to the stable minimal surface, while the dotted lines describe unstable solutions, which cannot be realized in experiments (the unstable branches $R_{D}(H)$ and $R_{C}(H)$ closely follow the same dotted line and are practically indistinguishable). $H^{\ast }$ is the turning point of the $R_{D}(H)$ and $R_{C}(H)$ functions where their slope is vertical.

Figure 5

Table 1.Characteristic parameters of surfaces supported by polygonal frames: $q^{\ast }(n),H^{\ast }(n),R_{D}^{\ast }(n),\unicode[STIX]{x1D6E5}^{\ast }(n),$ dimensionless distance $|A_{1}A_{n}|=L=2\sin \unicode[STIX]{x1D6FD}_{n}$ and the ratio $H^{\ast }/L$.

Figure 6

Figure 6.(a) The internal, (b) critical and (c) external configurations of the $\unicode[STIX]{x1D6F4}$ surface. (d) Two flat separated lamellae supported by the polygonal frames also represent two minimal surfaces.

Figure 7

Figure 7.(a) The surface area $S(H)$ as a function of separation distance $H$ for $\unicode[STIX]{x1D6F4}$-surfaces supported by triangular equilateral frames. The curve 1 corresponds to the external configuration (figure 6c) and curve 2 corresponds to the internal configuration (figure 6a). The dashed horizontal line corresponds to two separated lamellae sitting on triangular frames (figure 6d). The curve $1^{\prime }$ corresponds to the external configuration of $\unicode[STIX]{x1D6F4}$-surface with lamella, and curve $2^{\prime }$ corresponds to the internal configuration of $\unicode[STIX]{x1D6F4}$-surface with lamella. (b) $S(H)$ for classical catenoid supported by the circular frames of radius 1. The surface area 1 corresponds to the external catenoid with larger neck radius, the surface area 2 corresponds to the internal catenoid with smaller neck radius. The curve $1^{\prime }$ corresponds to the external catenoid with separating lamella, and curve $2^{\prime }$ corresponds to the internal catenoid with separating lamella. The dashed horizontal line gives the area of two separated lamellae stretched on the circular frames. Points $G,M$ give the areas of minimal surfaces equal to the areas of two lamellae stretched on the frames. $H^{\ast }$ marks the maximum separation distance between the frames where the minimal surface $\unicode[STIX]{x1D6F4}$ disappears.

Figure 8

Figure 8.(a) The minimal surface (external $\unicode[STIX]{x1D6F4}$-surface) for the critical distance $H=H^{\ast }$, (b) the minimal surface without lamella for $H\approx 0.15$, (c) the minimal surface (external $\unicode[STIX]{x1D6F4}$-surface) with a separating lamella for critical distance $H=H^{\ast }$, (d) the minimal surface with a separating lamella for $H\approx 0.11$. The frames and lamella boundaries are shown as the black solid lines and the level curves of constant height are shown as the white lines (the lamella is not shown).

Figure 9

Table 2.Characteristic parameters of surfaces separated by lamellae and supported by supported by polygonal frames: $q^{\ast }(n)$, $H^{\ast }(n)$, $R_{D}^{\ast }(n)$, $\unicode[STIX]{x1D6E5}^{\ast }(n)$, dimensionless distance $|A_{1}A_{n}|=L$ and the ratio $H^{\ast }/L$.

Figure 10

Figure 9.Schematic of the experimental set-up: (a) digital calliper with two co-aligned triangular wire frames with a soap film between them, (b) the beaker containing the soap solution, (c) the photographs of the soap films without and with a separating lamella and two flat lamellae on the frames after the films break, (d) the theoretical separation distance $h$ is greater than the measured separation distance $h_{exp}$ between frames.

Figure 11

Figure 10.Testing Plateau’s law for three soap films meeting at a Plateau border. (a,b) Side view of the planar lamella separating the soap films supported by triangular frames. The dots mark the areas magnified and viewed from the front to show that three films are meeting at the Plateau border and forming a $120^{\circ }$ angle between each pair. The distance between frames is $h_{exp}=3.5~\text{mm}$. (c) Sketch illustrating the front cross-section of minimal surface with a central lamella dividing this surface into two halves. The half-films and lamella meet at equal angles of $120^{\circ }$.

Figure 12

Figure 11.(a–c) Side view of soap film showing the shape change of the separating lamella as the distance between triangular wire frames increases. (d) The experimental (dots) and theoretical (solid lines) profiles of dimensional lamella contour $\unicode[STIX]{x1D6E4}$ for four separation distances $h$: 1 – 3.87 mm, 2 – 6.02 mm, 3 – 7.00 mm, 4 – 8.10 mm, 5 – is the critical distance according to the theory, $h^{\ast }=8.06~\text{mm}$ (1 –  $H=0.224$, 2 – $H=0.348$, 3 – $H=0.405$, 4 – $H=0.468$, 5 – $H^{\ast }=0.466$). The data points are taken from the experimental images. The apparent coordinates of frame vertices are shown by the squares. To fit the experimental data points, a correction distance $\unicode[STIX]{x1D6FF}=0.5~\text{mm}$ was added to the measured separation distance. The units are given in mm.

Figure 13

Figure 12.(a–c) Side view of soap film showing the shape change of the hole at the neck of the film as the distance between triangular wire frames increases. (d) The experimental (dots) and theoretical (solid lines) profiles of the hole contour $\unicode[STIX]{x1D6E4}$ for four separation distances $h$: 1 – 11.00 mm, 2 – 12.10 mm, 3 – 12.85 mm, 4 – 13.03 mm, 5 – 13.20 mm is the critical distance according to the theory (1 – $H=0.638$, 2 – $H=0.702$, 3 – $H=0.745$, 4 – $H=0.756$, 5 – $H^{\ast }=0.766$). The data points are taken from the experimental images. The apparent coordinates of frame vertices are shown by the squares. To fit the experimental data points, a correction distance $\unicode[STIX]{x1D6FF}=0.2~\text{mm}$ was added to the measured separation distance. The units are given in mm.

Alimov et al. supplementary movie

Three dimensional configuration of a periodic cell of the Schwarz' H triply periodic minimal surface obtained using Chaplygin's hodograph method.

Download Alimov et al. supplementary movie(Video)
Video 5.6 MB
Supplementary material: File

Alimov et al. supplementary material

Supplementary data

Download Alimov et al. supplementary material(File)
File 1.3 MB