Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T05:31:37.067Z Has data issue: false hasContentIssue false

On the flow-acoustic coupling of fan blades with over-the-rotor liner

Published online by Cambridge University Press:  11 May 2022

Yu Sun
Affiliation:
School of Energy and Power Engineering, Beihang University, Beijing 102206, PR China
Xiaoyu Wang*
Affiliation:
Research Institute of Aero-Engine, Beihang University, Beijing 102206, PR China
Lin Du
Affiliation:
Research Institute of Aero-Engine, Beihang University, Beijing 102206, PR China
Xiaofeng Sun
Affiliation:
School of Energy and Power Engineering, Beihang University, Beijing 102206, PR ChinaResearch Institute of Aero-Engine, Beihang University, Beijing 102206, PR China
*
†Email address for correspondence: bhwxy@buaa.edu.cn

Abstract

Over-the-rotor liner exhibits the potential to further attenuate turbofan noise, but the physics involved remain to be explored. In this paper, a three-dimensional coupled singularity method is proposed to investigate the flow-acoustic coupling effects of axially overlapping annular rotor and finite-length liner in subsonic flow. The formulation adopts the orthogonal basis expansion of the generated disturbances in terms of the hard-walled duct modes. The sound scatterings at the rotor and the liner are then characterized, respectively, by the underdetermined dipole and monopole distributions. We derive a simultaneous solution to the coupled unsteady rotor and liner responses, which ensures that the resultant perturbed field satisfies both the impermeable boundary condition on the blade surfaces and the impedance boundary condition on the lined wall. The effect of a perforated porous-material liner on the wake–rotor interaction tones is investigated. The analysis reveals that for the sound field of varying mode and frequency characteristics, moving the inlet liner to the over-the-rotor location generally leads to limited loss or even an increase of upstream sound absorption, along with additional acoustic benefits in the aft duct. The flow-acoustic coupling between the axially overlapping rotor and liner is shown to alleviate significantly the unsteady blade loading and meanwhile intensify the fluid particle oscillation through the acoustically treated wall. Sound source reduction and sound dissipation enhancement are thus identified as the governing noise attenuation mechanisms. Finally, we extend the analysis to provide insights into the effectiveness of over-the-rotor acoustic treatment with shortened axial length.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.The physical model under investigation: (a) the duct system; (b) the porous-material liner.

Figure 1

Figure 2.Blade force triangle and mean flow velocity triangle.

Figure 2

Figure 3.Transmission loss of a perforated liner filled with fibrous material in a straight circular duct. The parameters are given in Selamet et al. (2004) as $R_d=2.45$ cm, $L_{a}=25.72$ cm, $h_{cav}=5.77$ cm, $R_f=4896\ \textrm {Rayls}\ \textrm {m}^{-1}$, $\zeta =8\,\%$, $t_p=0.09$ cm and $d_h=0.249$ cm.

Figure 3

Figure 4.Acoustic powers radiated from the rotor subject to the impingement of oncoming rotating wakes in an annular hard-walled duct of infinite axial extent: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=10^{\circ }$.

Figure 4

Figure 5.Variations of (a) the cut-on modes, and (b) the dimensionless acoustic powers generated in the hard-walled duct with $N_w$.

Figure 5

Figure 6.The three liner locations under investigation, where $L_a=3.0C_a$.

Figure 6

Figure 7.Variation of the upstream sound absorption ratio with the circumferential periodicity $N_w$ of the wake distortion: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=20^{\circ }$.

Figure 7

Figure 8.Variation of the downstream sound absorption ratio with the circumferential periodicity $N_w$ of the wake distortion: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=20^{\circ }$.

Figure 8

Figure 9.Variation of the total sound absorption coefficient with the circumferential periodicity $N_w$ of the wake distortion: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=20^{\circ }$.

Figure 9

Figure 10.Dimensionless modal acoustic powers transmitted (a) upstream and (b) downstream, respectively. Here, $N_w=21$ and $\Delta \theta _T=0^{\circ }$.

Figure 10

Figure 11.Dimensionless modal acoustic powers transmitted (a) upstream and (b) downstream, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 11

Figure 12.Sound field distribution along the duct with (a) hard wall, (b) UL-3, (c) PO-3, and (d) FO-3, respectively. The black dashed lines mark the axial positions of the blade leading and trailing edges, and the solid pink rectangle marks the liner location. Here, $N_w=21$ and $\Delta \theta _T=0^{\circ }$.

Figure 12

Figure 13.Sound field distribution along the duct with (a) hard wall, (b) UL-3, (c) PO-3, and (d) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 13

Figure 14.Unsteady blade loading distribution predicted for (a) hard wall, (b) UL-3, (c) PO-3, and (d) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=0^{\circ }$.

Figure 14

Figure 15.Unsteady blade loading distribution predicted for (a) hard wall, (b) UL-3, (c) PO-3, and (d) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 15

Figure 16.Distribution of the normal particle velocity amplitude over the lined wall, for (a) UL-3, (b) PO-3, and (c) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=0^{\circ }$.

Figure 16

Figure 17.Distribution of the normal particle velocity amplitude over the lined wall, for (a) UL-3, (b) PO-3, and (c) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 17

Figure 18.The over-the-rotor liners of the shortened axial lengths: (a) $L_a=2.0C_a$; (b) $L_a=1.0C_a$.

Figure 18

Table 1.Sound absorption under the circumstance where $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 19

Figure 19.Sound field distribution along the duct with (a) hard wall, (b) FO-1, (c) FO-2, and (d) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 20

Figure 20.Unsteady blade loading distribution predicted for (a) FO-1 and (b) FO-2, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 21

Figure 21.Distribution of the normal particle velocity amplitude over the lined wall, for (a) FO-1, (b) FO-2, and (c) FO-3, respectively. Here, $N_w=21$ and $\Delta \theta _T=20^{\circ }$.

Figure 22

Figure 22.Predictions of the dimensionless acoustic powers radiated by the isolated rotor subject to the impingement of oncoming wakes in the infinite hard-walled duct, with increasing $N_x$ and fixed $N_r = 13$: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=20^{\circ }$.

Figure 23

Figure 23.Predictions of the dimensionless acoustic powers radiated by the isolated rotor subject to the impingement of oncoming wakes in the infinite hard-walled duct, with increasing $N_r$ and fixed $N_x = 29$: (a) $\Delta \theta _T=0^{\circ }$; (b) $\Delta \theta _T=20^{\circ }$.

Figure 24

Figure 24.Predictions of the sound absorption coefficient of the isolated liner with increasing $N_l$. Consider that a single upstream-propagating mode $(m,n)$, corresponding to each cut-on mode that would be generated by the wake–rotor interaction in the case of $N_w = 21$, is incident from downstream.

Figure 25

Figure 25.Predictions of the dimensionless (a) upstream-transmitted and (b) downstream-transmitted acoustic powers radiated from the rotor–liner combination with different numbers of acoustic modes retained in the unsteady coupled analysis. Here, $N_w = 21$ and $\Delta \theta _T=20^{\circ }$.