Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T12:06:26.022Z Has data issue: false hasContentIssue false

Direct numerical simulation of Taylor–Couette flow with vertical asymmetric rough walls

Published online by Cambridge University Press:  16 November 2023

Fan Xu
Affiliation:
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, PR ChinaState Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, P. O. Box 353, Beijing 100190, PR China
Jinghong Su
Affiliation:
Center for Combustion Energy, Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, PR ChinaDepartment of Engineering Mechanics, School of Aerospace Engineering, Tsinghua University, Beijing 100084, PR China
Bin Lan
Affiliation:
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, PR ChinaState Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, P. O. Box 353, Beijing 100190, PR China
Peng Zhao
Affiliation:
State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, P. O. Box 353, Beijing 100190, PR ChinaSchool of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, PR China
Yurong He*
Affiliation:
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, PR China
Chao Sun*
Affiliation:
Center for Combustion Energy, Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, PR ChinaDepartment of Engineering Mechanics, School of Aerospace Engineering, Tsinghua University, Beijing 100084, PR China
Junwu Wang*
Affiliation:
State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, P. O. Box 353, Beijing 100190, PR ChinaSchool of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, PR ChinaInnovation Academy for Green Manufacture, Chinese Academy of Sciences, Beijing 100190, PR China
*
†Email addresses for correspondence: rong@hit.edu.cn, chaosun@tsinghua.edu.cn, jwwang@ipe.ac.cn
†Email addresses for correspondence: rong@hit.edu.cn, chaosun@tsinghua.edu.cn, jwwang@ipe.ac.cn
†Email addresses for correspondence: rong@hit.edu.cn, chaosun@tsinghua.edu.cn, jwwang@ipe.ac.cn

Abstract

Direct numerical simulations are performed to explore the effects of the rotating direction of the vertically asymmetric rough wall on the transport properties of Taylor–Couette (TC) flow, up to a Taylor number of ${Ta} = 2.39\times 10^{7}$. It is shown that, compared with the smooth wall, the rough wall with vertical asymmetric strips can enhance the dimensionless torque ${Nu}_{\omega }$. More importantly, at high Ta, clockwise rotation of the inner rough wall (where the fluid is sheared by the steeper slope side of the strips) results in a significantly greater torque enhancement compared to counter-clockwise rotation (where the fluid is sheared by the smaller slope side of the strips), due to the larger convective contribution to the angular velocity flux. However, the rotating direction has a negligible effect on the torque at low Ta. The larger torque enhancement caused by the clockwise rotation of the vertically asymmetric rough wall at high Ta is then explained by the stronger coupling between the rough wall and the bulk, attributed to the larger biased azimuthal velocity towards the rough wall at the mid-gap of the TC system, the increased turbulence intensity manifested by larger Reynolds stress and a thinner boundary layer, and the more significant contribution of the pressure force on the surface of the rough wall to the torque.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Schematic view of the Taylor–Couette system and the geometry of roughness. (a) Three-dimensional view. The inner cylinder with radius ${r}_{i}$ is rotating with angular velocity $\omega _{i}$. Here, $\omega _{i}>0$ represents that the fluid is sheared by the smaller slope side of the strips, referred subsequently as counter-clockwise rotation; $\omega _{i}<0$ indicates the fluid is sheared by the steeper slope side of the strips, referred subsequently as clockwise rotation. The outer cylinder with radius ${r}_{o}$ is stationary. (b) Cross-section view of the gap between the two cylinders: ${d} = {r}_{o} - {r}_{i}$. The rough elements are eighteen triangular vertical strips positioned equidistantly on the inner cylinder wall. The height of the rough elements are 0.1d and 0.2d. In the present simulations, a rotational symmetry of six is used. Therefore, the computational domain contains 1/6 of the azimuthal width and has three rough elements on the inner cylinder.

Figure 1

Table 1.Values of the control parameters and the numerical results of the simulations. The columns display the strip height, the Taylor number, the inner Reynolds number, the Reynolds number for the roughness, the resolution employed, the dimensionless torque ${Nu}_{\omega }$ and the maximum deviation of angular velocity flux $\Delta {J}$, respectively. All of the simulations are run in reduced geometry with $\varGamma =2{\rm \pi} /3$ and a rotation symmetry of the order of six. The corresponding cases at the same Ta without roughness (with smooth cylinders) can be found in our previous study (Xu et al.2022) and in that of Ostilla-Mónico et al. (2013).

Figure 2

Figure 2.Explored (Ta, $\delta /{d}$) parameter space. There are three different regimes in the phase spaces, i.e. the non-vortical laminar flow, the laminar Taylor vortices and the turbulent Taylor vortices regimes. The triangles represent the strip height of 0.1d, the rhombuses show the strip height of 0.2d.

Figure 3

Figure 3.(a) Nusselt number as a function of Ta for smooth cases and rough cases with two strip heights for different rotating directions of the inner cylinder at $\eta = 0.714$. The results of previous smooth walls (Ostilla-Mónico et al.2013; Xu et al.2022) and parallel roughness walls with two different groove heights (Zhu et al.2016) are also shown for reference. (b) The ${Nu}_{\omega }$ deviation between rough and smooth walls with increasing Ta.

Figure 4

Figure 4.(a) Nusselt number as a function of Ta for smooth cases and rough cases with two strip heights for different rotating directions of the inner cylinder at $\eta =0.714$. The data of rough cases are from the present study, and the data of smooth cases are from our previous study (Xu et al.2022).

Figure 5

Figure 5.Convective and diffusive contributions to the angular velocity flux for different rotating directions with $\delta = 0.2{d}$ at (a) ${Ta} = 2.44 \times 10^{5}$ and (b) ${Ta} = 2.39 \times 10^{7}$. All results are normalized by the angular velocity flux of the non-vortical laminar state ${J}^{\omega }_{lam}$, and only the data within the scope of ${r_{i}}+\delta \leq {r} \leq r_{o}$ are shown.

Figure 6

Figure 6.Average and fluctuation contributions to the convective term of total angular velocity flux for different rotating directions with $\delta = 0.2{d}$ at ${Ta} = 2.39 \times 10^{7}$. All results are normalized by the angular velocity flux of the non-vortical laminar state ${J}^{\omega }_{lam}$, and only the data within the scope of $r_{i} +\delta \leq {r} \leq r_{o}$ are shown.

Figure 7

Figure 7.Averaged azimuthal velocity profiles for different rotating directions of the inner rough wall with two strip heights at (a) ${Ta} = 2.44 \times 10^{5}$ and (b) ${Ta} = 2.39 \times 10^{7}$. The averaged azimuthal velocity profiles for smooth walls at these two Ta from our previous study (Xu et al.2022) are also included for comparison.

Figure 8

Figure 8.Non-dimensionalized azimuthal velocity profiles (a) for the outer stationary wall and (b) for different rotating directions of the inner rough wall with $\delta = 0.1{d}$ and $\delta = 0.2{d}$ versus wall distance at ${Ta}=2.39 \times 10^{7}$. The inset in figure 8(b) is the enlargement near the inner wall. The non-dimensionalized azimuthal velocity profiles for a smooth wall at the same Ta are from our previous study (Xu et al.2022). For the outer smooth wall, the non-dimensionalized azimuthal velocity profile is ${u}^+ = \langle u_{\varphi } \rangle _{A,t} /{u}_{\tau }$ and the wall distance is ${y}^+ = ({r}_{o} - {r})/\delta _{v}$, where the friction velocity is ${u}_{\tau } = \sqrt {\tau /2{\rm \pi} {l}\rho {r}^{2}} =\sqrt {Nu_{\omega }J^{\omega }_{lam}/{r}^{2}}$, the boundary layer thickness $\delta _{v}$ is estimated by $\delta _{v} \approx d\sigma / (2Nu_{\omega })$, and $\sigma$ is defined as $\sigma = [(r_{i}+r_{o})/(2\sqrt {r_{o}r_{i}})]^{4}$ (Brauckmann & Eckhardt 2013; Zhu et al.2017); for the inner rough wall, the non-dimensionalized azimuthal velocity profile ${u}^+ = (\bar {u} _{\varphi, r=r_{i}+\delta } - \langle u_{\varphi } \rangle _{A,t} )/{u}_{\tau }$ and the wall distance ${y} ^+ = ({r} - {r}_{i} - \delta )/ \delta _{v}$. The dotted lines show the relationships ${u} ^+ = {y}^+$.

Figure 9

Figure 9.Dimensionless value of the roughness height $\delta$ in wall units. The grey and blue dashed lines denote the boundaries of the viscous sublayer ($\delta / \delta _{v} < 5$) and buffer layer ($5 < \delta / \delta _{v} < 30$).

Figure 10

Figure 10.(a) Contributions to the total torque originating from the pressure force $Nu_{p}$ and the viscous force $Nu_{\nu }$ with two strip heights $\delta = 0.1{d}$ and $\delta = 0.2{d}$ on the inner wall rotating in different directions. The solid lines represent the contribution of the pressure force ${F_{p}}$ to the total torque, and the dash ones represent the contribution of the viscous force $F_{\nu }$. (b) Log-log scale of figure 10(a).

Figure 11

Figure 11.Radial dependence of ${Nu}_{\omega }$ for different strip heights and different rotating directions of inner rough wall at ${Ta} = 2.44 \times 10^{5}$ with three different grid resolutions. An error bar indicating a 1 % error is provided for reference, the resolved cases lie within this error bar.