Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T02:10:52.398Z Has data issue: false hasContentIssue false

Nonlinear Optical Characterization of GaN Layers Grown by MOCVD on Sapphire

Published online by Cambridge University Press:  13 June 2014

Ivan M. Tiginyanu
Affiliation:
Laboratory of Low-Dimensional Semiconductor Structures, Institute of Applied Physics, Technical University of Moldova, 2004 Chisinau, Moldova, tiginyanu@mail.md
Igor V. Kravetsky
Affiliation:
Laboratory of Low-Dimensional Semiconductor Structures, Institute of Applied Physics, Technical University of Moldova, 2004 Chisinau, Moldova, tiginyanu@mail.md
Dimitris Pavlidis
Affiliation:
Laboratory of Low-Dimensional Semiconductor Structures, Institute of Applied Physics, Technical University of Moldova, 2004 Chisinau, Moldova, tiginyanu@mail.md
Andreas Eisenbach
Affiliation:
Laboratory of Low-Dimensional Semiconductor Structures, Institute of Applied Physics, Technical University of Moldova, 2004 Chisinau, Moldova, tiginyanu@mail.md
Ralf Hildebrandt
Affiliation:
Solid State Electronics Laboratory, Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Avenue, Ann Arbor, MI 48109-2122, U.S.A.
Gerd Marowsky
Affiliation:
Solid State Electronics Laboratory, Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Avenue, Ann Arbor, MI 48109-2122, U.S.A.
Hans L. Hartnagel
Affiliation:
Laser-Laboratorium Göttingen, Hans-Adolf-Krebs-Weg 1, D-37077 Göttingen, Germany

Abstract

Optical second and third harmonic generation measurements were carried out on GaN layers grown by metalorganic chemical vapor deposition (MOCVD) on sapphire substrates. The measured d33 is 33 times the d11 of quartz. The angular dependence of second-harmonic intensity as well as the measured ratios d33/d15 = −2.02 and d33/d31 =−2.03 confirm the wurzite structure of the studied GaN layers with the optical c-axis oriented perpendicular to the sample surface. Fine oscillations were observed in the measured second and third harmonic angular dependencies. A simple model based on the interference of the fundamental beam in the sample was used to explain these oscillations.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Measured p-polarized second-harmonic intensity as a function of the incident angle of the p- and s-polarized fundamental beam. The angular resolutions are 1° (a) and 0.1° (b) per step, respectively.

Figure 1

Figure 2.Measured p-polarized second-harmonic intensity as a function of the incident angle of the p-polarized fundamental beam. The angular resolution is 0.01° per step. The solid line is experimental, the dotted line is a fit.

Figure 2

Figure 3._ Measured p-polarized third-harmonic intensity as a function of the incident angle of the p-polarized fundamental beam for back (solid squares) and front (open circles) excitations, respectively. The angular resolution is 0.1° per step. Solid lines show fits.

Figure 3

Figure 4.Measured p-polarized second-harmonic intensity as a function of polarization angle of the fundamental beam at 10° (solid squares) and 30° (solid triangles) incident angles of the pump beam, respectively.