Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T23:26:32.497Z Has data issue: false hasContentIssue false

The generation and diffusion of vorticity in three-dimensional flows: Lyman's flux

Published online by Cambridge University Press:  25 March 2021

S.J. Terrington*
Affiliation:
Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia
K. Hourigan
Affiliation:
Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia
M.C. Thompson
Affiliation:
Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia
*
†Email address for correspondence: stephen.terrington@monash.edu

Abstract

We examine Lyman's (Appl. Mech. Rev., vol. 43, issue 8, 1990, pp. 157–158) proposed definition of the boundary vorticity flux, as an alternative to the traditional definition provided by Lighthill (Introduction: boundary layer theory. In Laminar Boundary Layers (ed. L. Rosenhead), chap. 2, 1963, pp. 46–109. Oxford University Press). While either definition may be used to describe the generation and diffusion of vorticity, Lyman's definition offers several conceptual benefits. First, Lyman's definition can be interpreted as the transfer of circulation across a boundary, due to the acceleration of that boundary, and is therefore closely tied to the dynamics of linear momentum. Second, Lyman's definition allows the vorticity creation process on a solid boundary to be considered essentially inviscid, effectively extending Morton's (Geophys. Astrophys. Fluid Dyn., vol. 28, 1984, pp. 277–308) two-dimensional description to three-dimensional flows. Third, Lyman's definition describes the fluxes of circulation acting in any two-dimensional reference surface, enabling a control-surface analysis of three-dimensional vortical flows. Finally, Lyman's definition more clearly illustrates how the kinematic condition that vortex lines do not end in the fluid is maintained, providing an elegant description of viscous processes such as vortex reconnection. The flow over a sphere, in either translational or rotational motion, is examined using Lyman's definition of the vorticity flux, demonstrating the benefits of the proposed framework in understanding the dynamics of vortical flows.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Material surface, $S$, with boundary curve, $C$. $\boldsymbol {\hat {s}}$ is the unit normal to $S$, $\boldsymbol {\hat {n}}$ is a unit normal to $C$, which lies in the tangent plane of $S$, and $\boldsymbol {\hat {t}}$ is the unit tangent vector to $C$.

Figure 1

Figure 2.(a) The circulation, and flux of vortex lines, is constant along the length of a vortex tube. We consider this tube to comprise a bundle of ‘vortex filaments’ – thin vortex tubes of infinitesimal circulation, with $\varGamma _i$ representing the circulation contained in the ‘$i$’-th filament. (b) The total circulation in $S$ is equal to the sum of circulations of all vortex tubes passing through $S$. If each vortex tube is interpreted as a bundle of vortex filaments, then $\varGamma _S$ is a measure of the net strength of all filaments passing through $S$.

Figure 2

Figure 3.Advection of vortex filaments across the boundary of a stationary reference surface. (a) Advection of normal vorticity in the tangential direction, $(\boldsymbol {\omega } \boldsymbol {\cdot } \boldsymbol {\hat {s}})(\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {\hat {n}})$. (b) Advection of tangential vorticity in the normal direction, $(\boldsymbol {\omega } \boldsymbol {\cdot } \boldsymbol {\hat {n}})(\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {\hat {s}})$. (c) Advection of an oblique vortex filament across the boundary.

Figure 3

Figure 4.Transport of a vortex filament through two orthogonally intersecting surfaces. The term $(\boldsymbol {\omega } \boldsymbol {\cdot } \boldsymbol {\hat {s}})(\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {\hat {n}})$ occurs twice in the flux tensor, once representing the transport of $(\boldsymbol {\omega } \boldsymbol {\cdot } \boldsymbol {\hat {s}})$ in the $\boldsymbol {\hat {n}}$-direction (the primary effect), and a second time as the transport of $(\boldsymbol {\omega } \boldsymbol {\cdot } \boldsymbol {\hat {n}})$ in the $\boldsymbol {\hat {s}}$-direction (the secondary effect). Viscous terms in the Lyman–Huggins tensor are interpreted in an analogous manner.

Figure 4

Figure 5.The two-dimensional vorticity field of Takaoka's straight jet flow, at (a) $t = 0$, (b) $t = 0.3$ and (c) $t = 0.6$. Light-grey vectors represent the vorticity field, while solid lines are closed vortex lines. Colour shading indicates the viscous part of the axial flux vector, $j_z$.

Figure 5

Figure 6.Schematic illustration of the diffusion of vorticity in the straight jet flow: (a) Along the section of the $x$-axis between $A$ and $C$, $j_z < 0$ results in the diffusion of negative $\omega _y$ to the left, accompanied by the diffusion of opposite-signed $\omega _x$ away from the $x$-axis. When $j_z>0$, negative $\omega _y$ is diffused to the right, with corresponding diffusion of opposite-signed $\omega _x$ towards the $x$-axis. (b) Opposite-signed $\omega _y$ is diffused towards the ‘X’-point ($A$), where cross-diffusive annihilation occurs. Vortex lines are reconnected across the $y$-axis, as opposite-signed $\omega _x$ diffuses away from the null-point. (c) Annihilation of flux loops about an ‘O’-point ($C$), as opposite-signed $\omega _y$ cross-annihilates along the $x$-axis, and opposite-signed $\omega _x$ cross-annihilates on the $y$-axis.

Figure 6

Figure 7.The reconnection of vortex lines across the ‘X’-point. The cross-diffusive annihilation of opposite-sign $\omega _y$ on the $x$-axis reduces the ‘flux of vortex lines’ passing through the $x$-axis, and this is balanced by the cross-diffusion of opposite-signed $\omega _x$ away from $A$, along the $y$-axis. Antiparallel vortex lines passing through the $x$-axis are ‘cut’ by the cross-annihilation of $\omega _y$, and reconnected across the $y$-axis by the cross-diffusion of opposite-signed $\omega _x$ away from $A$.

Figure 7

Figure 8.Illustration of the ‘bridging’ mechanism for the reconnection of an antiparallel vortex pair, based on the description provided by Melander & Hussain (1989, 1990). (a–d) Three-dimensional isometric view showing the main features of vortex tubes at several instances during the connection process. These images are merely representative of flow behaviour; for accurate numerical data, see Melander & Hussain (1989, 1990) or McGavin & Pontin (2018).

Figure 8

Figure 9.The three terms in the axial flux vector when expressed in local vorticity coordinates: (a) Diffusion of vortex-tangential vorticity in the vortex-normal direction due to gradients in vorticity magnitude. (b) Diffusion of vortex-tangential vorticity due to vortex line curvature. This can be interpreted as a consequence of the cross-diffusion of vortex normal vorticity in the vortex-tangent direction. (c) Cross-diffusion of vortex-normal vorticity, due to the torsion of vortex lines. This term is also related to the generation or dissipation of helicity.

Figure 9

Figure 10.Schematic illustration of the proposed vorticity generation mechanism. Circulation is generated in the interface by the inviscid relative acceleration, and diffused into the fluid by the viscous forces which enforce the no-slip condition. (a,b) Pressure gradients, body forces and pure translational acceleration generate solenoidal vortex lines, with no change in the normal vorticity on the boundary. (c,d) The circulation generated by rotational motion of the solid body ensures that vortex lines are continuous across the boundary.

Figure 10

Figure 11.(a) Control volume used to analyse the total circulation across an interface, $I$. Here, $V_1$ and $V_2$ are the portions of the control volume, $V$, in each fluid; $\boldsymbol {\hat {s}}$ is the unit normal to the interface, and $\boldsymbol {\hat {n}}$ is the unit normal to the control volume boundary, $\partial V$. $\boldsymbol {\hat {b}}$ is a vector tangent to $I$, but orthogonal to $\partial I$, and $\boldsymbol {\hat {t}}$ is the tangent to the boundary curve $\partial I$. (b) Illustration of the flux of vortex lines into a section of the interface. The difference in circulation between vortex tubes on each side of the interface is balanced by the flux of circulation along the interface ((3.5)).

Figure 11

Figure 12.Coordinate system for (a) rotating and (b) translating sphere flows.

Figure 12

Figure 13.Transient Stokes flow over an impulsively rotated sphere. (a) The initial circulation sheet generated during the impulsive acceleration. A cut-away showing vortex lines in the solid body is also provided. (b–d) vortex lines in the $r$–$z$ plane, with colour contours of the dimensionless vorticity magnitude, at a dimensionless flow time (b) $\tau = 0.05$, (c) $\tau = 1$ and (d) steady–state flow.

Figure 13

Figure 14.Vortex lines in the $r$–$z$ plane, and colour contours of the dimensionless vorticity magnitude, at select time instants during one half-period of transient Stokes flow over an oscillating sphere. The colour map for vorticity contours is the same as for figure 13.

Figure 14

Figure 15.Schematic illustration of the generation and diffusion of vortex lines during (a) the acceleration phase, and (b) the deceleration phase, for Stokes flow driven by an oscillating sphere. New flux loops are created on the equator during the acceleration phase, while flux loops are shed into the fluid during the deceleration phase.

Figure 15

Figure 16.Contours of azimuthal velocity (a,c,e), and azimuthal vorticity (b,d,f), as well as a vector plot of the in-plane velocity (a,c,e), and the projection of vortex lines in the $x$–$z$ plane, computed as contours of constant $\xi = 2{\rm \pi} x u_\phi$ (b,d,f). Visualisations are provided at a range of dimensionless flow-times, $\tau = \varOmega t$. Velocity vectors are displayed on a coarse grid, and are not representative of the mesh used for numerical simulation.

Figure 16

Figure 17.(a) The control surface $A$, used to compute the total azimuthal circulation in (4.11a). (b) Illustration of the various terms in $F_{{vt}}$. Each vortex line enters $A$ through the sphere, and leaves along the equatorial axis. The generation of negative azimuthal vorticity by vortex tilting is related to the condition that the rate of advection of vortex lines across $A$, in the azimuthal direction, is greater on the sphere than on the equatorial axis.

Figure 17

Figure 18.(a) Time history of azimuthal circulation in the upper quadrant of the $x$–$z$ plane, and (b) contributions of each flux term in (4.11a) to the total circulation balance: $F_{vt.}$, the effects of vortex tilting; $F_{gen.}$, the generation of vorticity on the surface of the sphere; and $F_{dcy.}$, the decay of vorticity due to viscous cross-annihilation. $\sigma _p$ is the contribution of pressure gradients to $F_{gen.}$.

Figure 18

Figure 19.Contour plot of azimuthal vorticity (top) and streamlines (bottom) for steady flow over a sphere at $Re = 125$.

Figure 19

Figure 20.Contour plots of (a) surface pressure, and (b) boundary vorticity magnitude, on the surface of the sphere, at $Re = 125$. Vectors indicate (a) the boundary vorticity flux, and (b) the boundary vorticity, along with representative vorticity lines on the surface. (c) gives the distributions of boundary vorticity, and boundary vorticity flux, on the surface of the sphere, where $\theta = \sin ^{-1}(-r/x)$ is the polar angle.

Figure 20

Figure 21.(a) A schematic illustration of vorticity transport in the $x$–$r$ plane. $F_x(x)$ is the net flux of $\omega _\phi$ in the streamwise direction, while $\sigma _\phi$ gives the rate of generation of vorticity on the sphere, and the rate of viscous annihilation on the symmetry axis. (b) The streamwise distribution of streamwise vorticity flux, $F_x(x)$.

Figure 21

Figure 22.(a) Two streamwise-oriented vortices in the wake behind a sphere at $Re = 250$, visualised using the $\lambda _2$ criterion. (b) Isosurfaces of streamwise vorticity: $\omega _x/(U/D) = 0.3$ (red), and $\omega _x/(U/D) = -0.1$ (blue), as well as representative vortex lines.

Figure 22

Figure 23.Colour contours of (a) surface pressure, and (b) vorticity magnitude. Pressure isobars are plotted in (a), while surface vortex lines are included in (b). Vectors in (a,b) are of the boundary vorticity flux ($\boldsymbol {\sigma }$) and vorticity ($\boldsymbol {\omega }$), respectively.

Figure 23

Figure 24.Colour contours of spanwise-oriented vorticity, $\omega _z$, as well as a vector plot and streamlines of the velocity field, in the symmetry plane ($z = 0$), for flow past a sphere at $Re = 250$.

Figure 24

Figure 25.(a) Reference surface, $A_x$, for computing the total streamwise circulation in each vortex. In the wake, only fluxes across the symmetry plane boundary ($z = 0$) contribute to the vorticity balance. When $-0.5 < x/D < 0.5$, the circulation balance includes fluxes across the symmetry plane, and across the surface of the sphere. (b) Schematic illustration of (4.18), when $F_x^* <0$. The rate of transfer of the upper portion of vortex loops through $A_x$ exceeds the rate of transfer of the lower portion, indicating the tilting of vortex lines and the generation of streamwise vorticity.

Figure 25

Figure 26.The streamwise distribution of (a) the streamwise circulation, $I_{\omega _x}$, and (b) the vortex tilting fluxes, $F_x^*$. The vertical dotted line indicates the maximum downstream extent of the sphere. Various terms in (4.20) are illustrated for $|x|/D < 0.5$, while the balance of fluxes in (4.18) are provided for $x/D>0.5$, including the contributions to $F_x^*$ from both viscous ($F_\nu ^*$) and advective ($F_u^*$) effects.

Figure 26

Figure 27.Instantaneous visualisations of the wake behind a sphere at $Re = 300$. (a) Isosurfaces of $\lambda _2 = 0$, (b) Isosurfaces of streamwise vorticity, as well as representative vortex lines, and (c) isosurfaces of spanwise vorticity ($\omega _z$). Opaque isosurfaces in (c) correspond to $\omega _z/(UD) = \pm 0.3$, while transparent isosurfaces are for $\omega _z/UD = \pm 0.05$.

Figure 27

Figure 28.Colour contours of spanwise vorticity and velocity streamlines (top), and streamwise distributions of vorticity and vorticity fluxes in the symmetry plane (lower), over one period of vortex shedding. $\phi$ is the temporal phase angle, measured from the point of minimum lift coefficient (Johnson & Patel (1999) define $\phi$ from the point of maximum lift).

Figure 28

Figure 29.Schematic illustration of the generation of hairpin vortex structures. (a) Rapid shedding of negative vorticity from the upper wake produces the primary vortex head, as well as tilting vortex lines forwards, generating positive streamwise vorticity. (b) Rapid shedding of positive vorticity from the lower wake generates the secondary vortex head, and tilts vortex loops backwards, generating negative streamwise vorticity in the legs of this vortex.

Terrington et al. supplementary movie 1

See pdf file for movie caption

Download Terrington et al. supplementary movie 1(Video)
Video 8 MB

Terrington et al. supplementary movie 2

See pdf file for movie caption

Download Terrington et al. supplementary movie 2(Video)
Video 16.7 MB

Terrington et al. supplementary movie 3

See pdf file for movie captions

Download Terrington et al. supplementary movie 3(Video)
Video 21.1 MB

Terrington et al. supplementary movie 4

See pdf file for movie captions

Download Terrington et al. supplementary movie 4(Video)
Video 5.5 MB
Supplementary material: PDF

Terrington et al. supplementary material

Captions for movies 1-4

Download Terrington et al. supplementary material(PDF)
PDF 15.7 KB