Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T22:49:23.677Z Has data issue: false hasContentIssue false

The Role of the Multi Buffer Layer Technique on the Structural Quality of GaN

Published online by Cambridge University Press:  13 June 2014

M. Benamara
Affiliation:
Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720, 62/203
Z. Liliental-Weber
Affiliation:
Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720, 62/203
J.H. Mazur
Affiliation:
Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720, 62/203
W. Swider
Affiliation:
Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720, 62/203
J. Washburn
Affiliation:
Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720, 62/203
M. Iwaya
Affiliation:
Meijo University, Dept. of Electrical and Electronic Engineering, 1-501 Shiogamaguchi, Tempaku ku, Nagoya 468- 8502, Japan
I. Akasaki
Affiliation:
Meijo University, Dept. of Electrical and Electronic Engineering, 1-501 Shiogamaguchi, Tempaku ku, Nagoya 468- 8502, Japan
H. Amano
Affiliation:
Meijo University, Dept. of Electrical and Electronic Engineering, 1-501 Shiogamaguchi, Tempaku ku, Nagoya 468- 8502, Japan

Abstract

Successive growth of thick GaN layers separated by either LT-GaN or LT-AlN interlayers have been investigated by transmission electron microscopy techniques. One of the objectives of this growth method was to improve the quality of GaN layers by reducing the dislocation density at the intermediate buffer layers that act as barriers to dislocation propagation. While the use of LT-AlN results in the multiplication of dislocations in the subsequent GaN layers, the LT-GaN reduces dislocation density. Based upon Burgers vector analysis, the efficiency of the buffer layers for the propagation of the different type of dislocations is presented. LT-AlN layer favor the generation of edge dislocations, leading to a highly defective GaN layer. On the other hand, the use of LT-GaN as intermediate buffer layers appears as a promising method to obtain high quality GaN layer.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

fig 1:Schematic drawing of the structure of the two studied samples

Figure 1

Fig 2:Dark field image of sample 1 with g=1 02. The density of dislocations decreases towards the surface.

Figure 2

Fig.3:Dislocation half loop formed in the HT-GaN layer.

Figure 3

Fig. 4:Dark field images of the same area taken under different conditions (a) with g=1 1 00: note the high density of edge dislocations in the upper layer. (b) with g=0002, the upper layer appears defect free.