Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T15:46:47.283Z Has data issue: false hasContentIssue false

Structural Properties of (GaIn)(AsN)/GaAs MQW Structures Grown by MOVPE

Published online by Cambridge University Press:  13 June 2014

C. Giannini
Affiliation:
PASTIS-CNRSM, I-72100 Brindisi, Italy
E. Carlino
Affiliation:
PASTIS-CNRSM, I-72100 Brindisi, Italy
L. Tapfer
Affiliation:
PASTIS-CNRSM, I-72100 Brindisi, Italy
F. Höhnsdorf
Affiliation:
Materials Science Center, Philipps-University, D-35032 Marburg, Germany
J. Koch
Affiliation:
Materials Science Center, Philipps-University, D-35032 Marburg, Germany
W. Stolz
Affiliation:
Materials Science Center, Philipps-University, D-35032 Marburg, Germany

Abstract

In this work, we investigate the structural properties of (GaIn)(AsN)/GaAs multiple quantum wells (MQW) grown at low temperature by metalorganic vapour phase epitaxy. The structural properties, in particular the In- and N-incorporation, the lattice strain (strain modulation), the structural perfection of the metastable (GaIn)(AsN) material system and the structural quality of the (GaIn)(AsN)/GaAs interfaces are investigated by means of high-resolution x-ray diffraction, transmission electron microscopy (TEM), and secondary ion mass spectrometry. We demonstrate that (GaIn)(AsN) layers of high structural quality can be fabricated up to lattice mismatches of 4%. Our experiments reveal that N and In atoms are localized in the quaternary material and no evidences of In-segregation or N-interdiffusion could be found. TEM analyses reveal a low defect density in the highly strained layers, but no clustering or interface undulation could be detected. High-resolution TEM images show that (GaIn)(AsN)/GaAs interfaces are slightly rougher than GaAs/(GaIn)(AsN) ones.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1Experimental (A) and simulated (B) (400) HRXRD pattern of the MQW considered.

Figure 1

Figure 2SIMS profiles obtained by using 5.5keV Cs+ (a) and O2+ (b) primary beam.

Figure 2

Figure 3BF image of the considered sample showing all the layers of the MQW.

Figure 3

Figure 4HRTEM image of one (GaIn)(AsN) layer of the MQW shown in figure 3.