Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T14:26:19.581Z Has data issue: false hasContentIssue false

High Density Plasma Damage Induced in n-GaN Schottky Diodes Using Cl2/Ar Discharges

Published online by Cambridge University Press:  13 June 2014

A.P. Zhang
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
G. Dang
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
F. Ren
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
X.A. Cao
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
H. Cho
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
E.S. Lambers
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
S.J. Pearton
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
R.J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
L. Zhang
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
A.G. Baca
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
R. Hickman
Affiliation:
SVT Associates, Eden Prairie, MN 55344
J.M. Van Hove
Affiliation:
SVT Associates, Eden Prairie, MN 55344

Abstract

The effects of dc chuck self-bias and high density source power (which predominantly control ion energy and ion flux, respectively) on the electrical properties of n-GaN Schottky diodes exposed to Inductively Coupled Plasma of Cl2/Ar were examined. Both parameters were found to influence the diode performance, by reducing the reverse breakdown voltage and Schottky barrier height. All plasma conditions were found to produce a nitrogen-deficient surface, with a typical depth of the non-stoichiometry being ∼ 500 Å. Post-etch annealing was found to partially restore the diode characteristics.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Schematic of the planar diodes

Figure 1

Figure 2.rf chuck power dependence of VB and ϕB in Cl2/Ar plasma exposed GaN diodes (top) and of dc chuck self-bias and GaN etch rate under the same conditions (bottom).

Figure 2

Figure 3ICP power dependence of VB and ϕB in Cl2/Ar plasma exposed GaN diodes (top) and of dc chuck self-bias and GaN etch rate under the same conditions (bottom).

Figure 3

Figure 4.AES surface scans from GaN (top) or after (center) Cl2/Ar plasma exposure, and subsequent annealing at 700 cC for 60 seconds (bottom).