Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T12:21:16.928Z Has data issue: false hasContentIssue false

Merging of two or more plumes arranged around a circle

Published online by Cambridge University Press:  11 May 2016

G. G. Rooney*
Affiliation:
Met Office, FitzRoy Road, Exeter EX1 3PB, UK
*
†Email address for correspondence: gabriel.rooney@metoffice.gov.uk

Abstract

A model is presented of merging turbulent plumes from sources evenly spaced around a horizontal circle in a quiescent, unstratified background. This follows the previously developed method of (i) identifying the boundaries of interacting plumes with velocity-potential contours of line sinks and (ii) closing the generalised plume equations with an entrainment assumption based on the integrated flux across the plume boundaries. It includes the simplest case of two merging plumes, as well as being applicable to plume flows in restricted corner configurations. The model is shown to display the expected limiting behaviour for the source plumes and the merged plume. Consideration of the plume fluxes in the merging region leads to a revision of the entrainment assumption. The resulting revised model compares satisfactorily with previous estimates of volume flux in two merging plumes.

Information

Type
Papers
Copyright
© Crown Copyright. Published by Cambridge University Press 2016 
Figure 0

Figure 1.(a) A diagram of the situation considered, in the case $n=4$. Cartesian $(x,y)$ coordinates of the plume sources are marked around the notional circle of radius $R$. The analysis describes the flow from the source at $(R,0)$, within the sector bounded by vertical planes of symmetry (indicated in outline by dashed lines). $A$ is the horizontal plume area in this sector, $w$ is the vertical plume velocity and $E$ is the sector flux of entrained fluid across the plume–ambient boundary. All these are height dependent. A further illustration of the system, based on the results of the model presented herein, is given in figure 7. (b–e) Positions of plume sources around the circle in the cases $2\leqslant n\leqslant 5$.

Figure 1

Figure 2.Contours of velocity potential in the sector of $Z^{\prime }$-space containing unity, for $n=4$. The contours ‘expand’ from the point (1, 0) to correspond with values of $k$ from the set $\{0.1,0.2,0.4,0.6,0.8,0.9,0.95,0.99,1.0,1.01,1.05,1.1,1.2,1.5,2.0,5.0,10.0,15.0\}$, see (2.6). The solid and dotted parts of the closed contours ($k\leqslant 1$) indicate the positive and negative square roots in (2.6) respectively. The $k=1$ contour extends to the origin.

Figure 2

Figure 3.Solutions for $\bar{w}$ (a) and $\bar{V}$ (b) from the original model (dashed) and the revised model (solid), for the case $n=2$. The dotted lines show the near- and far-field similarity solutions, at lower and higher ranges of $\bar{z}+\bar{z}_{vn}$, respectively.

Figure 3

Figure 4.Determination of the far-field virtual origin $\bar{z}_{vf}$ for the case $n=2$, with the original (a) and revised (b) models. The dotted lines show the data from the model integration, and the solid lines show straight line fits to the data between $3<\bar{z}\leqslant 5$. Extrapolation of the fit backward to the $\bar{z}$ axis provides the value of $\bar{z}_{vf}$. Note that the axis intersect in (a) is ‘in front of’ the plume origin, so $\bar{z}_{vf}$ is negative for this case in table 1, and vice versa for (b). Equivalent plots for other values of $n$ are similar to those shown.

Figure 4

Table 1.Predictions for the offset behind the actual origin of the far-field virtual origin, and for the point of first contact ($k=1$), in the original and revised model formulations. Results are presented for different numbers of plumes $n$. The data include small corrections for the near-field virtual origin $\bar{z}_{vn}$, obtained from (4.1).

Figure 5

Figure 5.Behaviour of the flux-balance parameter ${\it\Gamma}_{m}$ in the case $n=2$, for different values of the single-plume source parameter ${\it\Gamma}_{0}$ and different entrainment models. The initial integration condition is either ${\it\Gamma}_{0}=1$ or ${\it\Gamma}_{0}=0.5$, corresponding to pure or slightly forced individual plumes, respectively. The initial values of ${\it\Gamma}_{m}$ are then $2^{1/2}{\it\Gamma}_{0}$ in both cases. The colours correspond to ‘simple’ entrainment (black), and enhanced merging entrainment with $S=1$ (green) or $S=0.1$ (yellow).

Figure 6

Figure 6.Effective entrainment of two merging plumes compared to that of two isolated plumes, see (3.10) and the accompanying text. The flux ratio from the simple model is dashed, and that from the revised model is solid black. The piecewise model of Cenedese & Linden (2014, equation (2.12)) is shown in red for comparison. The vertical dotted line indicates the value of $2^{-1/2}$, to which all the two-plume models tend in the far field.

Figure 7

Figure 7.An illustration of the merging of three plumes, obtained with the modified model. The numerical solution gives the mapping between $\bar{z}$ and $k$, and thus the locus of the plume boundary at any height, from (2.6). To help with visualisation, the plume system is shaded according to the height $\bar{z}$ in the range between 0 and 1, and shaded contours are also projected onto the bottom plane.

Figure 8

Figure 8.The experiment of Cenedese & Linden (2014), in which salt water plumes from two sources at the same height produce a depth-dependent volume flux $Q$. This fills a tank of fresh water by displacement. The fresh–salty interface is at depth $h(t)$. The plumes are observed to touch at depth $z_{T}$ and $z_{{\it\epsilon}}$ denotes a position very close to the source.

Figure 9

Figure 9.Comparison of model output with the experimental data of Cenedese & Linden (2014). The red and magenta lines are integrations of the far- and near-field similarity solutions, respectively ((6.6), taking $\bar{z}_{vf}=0.12$ in the former), and also indicate the trajectory of the scaled experimental data. The dashed black line shows the original model with the default parameter settings. The grey shading shows the range of revised model results over the parameter ranges considered, with the green and yellow lines indicating model results at the range limits (explained in the text).