Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T16:27:54.268Z Has data issue: false hasContentIssue false

Thermo-osmotic transport in nanochannels grafted with pH-responsive polyelectrolyte brushes modelled using augmented strong stretching theory

Published online by Cambridge University Press:  28 April 2021

Vishal Sankar Sivasankar
Affiliation:
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Sai Ankit Etha
Affiliation:
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Harnoor Singh Sachar
Affiliation:
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Siddhartha Das*
Affiliation:
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
*
†Email address for correspondence: sidd@umd.edu

Abstract

In this paper, we develop a theory to establish that the thermo-osmotic (TOS) effects, induced by the application of an axial temperature gradient, lead to a massive enhancement in liquid transport in nanochannels grafted with charged polyelectrolyte (PE) brushes. We quantify the TOS transport by quantifying the induced electric field and the induced TOS flow field. The different components of the electric field, namely the ionic component, the thermal component and the osmotic component, as well as the contributions of different ions to these components, are quantified. Furthermore, we express the TOS velocity as a combination of chemiosmotic (COS), thermal and electro-osmotic (EOS) components. The COS and the thermal components augment each other and the overall strength and direction of the TOS flow are dictated by the direction and the relative strength of the EOS component. Most importantly, we compare the cases of brush-grafted nanochannels with those of the brush-free nanochannels of identical surface charge densities: the TOS transport is massively augmented in the brush-grafted nanochannels attributed to the combination of the localization of the electric double layer (EDL) (and hence any body force that depends on the EDL charge density) away from the nanochannel wall (i.e. the location of the maximum drag force) and the presence of a possible molecular slip (experienced by the liquid) along the brush surface.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic representing the flow induced by temperature gradient induced in (a) a brush-free nanochannel and (b) a backbone-charged PE-brush-grafted nanochannel. It shows a situation where the EOS component of the flow ($u_{EOS}$) opposes the COS component of the flow ($u_{COS}$) and the thermal component of the flow ($u_T$) as the thermo-osmotically induced electric field is negative (i.e. directed from right to left). Of course, it is equally possible that the thermo-osmotically induced electric field is positive (i.e. directed left to right) and the EOS flow aids the COS component and the thermal component. Here $\lambda _{EDL}$ is the EDL thickness.

Figure 1

Figure 2.Thermo-osmotically induced electric field due to the applied temperature gradient of $\boldsymbol {\nabla } T=\textrm {d}T/{\textrm {d} x}= 20~\textrm {Km}^{-1}$. The parameters used in obtaining this electric field are: $k_B = 1.38 \times 10^{-23}$$\textrm {JK}^{-1}, T = 298\ \textrm {K}, e = 1.6\times 10^{-19}\ \textrm {C}$ (elementary charge), $\epsilon _0 = 8.8 \times 10^{-12}\ \textrm {Fm}^{-1}$ (permittivity of free space), $\epsilon _r = 79.8$ (relative permittivity of water), $N = 400, h = 100\ \textrm {nm}, L = 0.05\ \textrm {m}, a = 1$ nm (Kuhn length), $\gamma a^3=1, pK_a = 3.5, \nu = 0.5, \omega = 0.1$. Other parameters are $Q_+ = 3460\ \textrm {J}\ \textrm {mol}^{-1}, Q_- = 530 \ \textrm {J}\ \textrm {mol}^{-1}, Q_{\textrm {H}^+} = 13.3 \times 10^{3}\ \textrm {J}\ \textrm {mol}^{-1},$$Q_{\textrm {OH}^-} = 17.2\times 10^{3}\ \textrm {J}\ \textrm {mol}^{-1}$ (Agar, Mou & Lin 1989), $D_+ = 1.330 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}, D_- = 2.030 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1},$$D_{\textrm {H}^+} = 9.310 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}, D_{\textrm {OH}^-} = 5.270\times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}$ (Haynes 2014). Here $\bar {E}={E}/{E_0}$, where $E_0 = {k_BT}/{eL} = 0.514\ \textrm {V}\ \textrm {m}^{-1}$ (based on the parameters given above).

Figure 2

Figure 3.Variation of (a) $\bar {E}_{ion}$, (b) $\bar {E}_{ion,N}$ and (c) $\bar {E}_{diff}$ (see (3.1) for the definitions of $\bar {E}_{ion,N}$ and $\bar {E}_{diff}$) with salt concentration ($c_\infty$) in the presence of applied temperature gradient. In the insets of panels (b) and (c), we show the logarithmic plot of the variation $\bar {E}_{ion,N}$ and $\bar {E}_{diff}$, respectively, with salt concentration. All parameters are the same as mentioned in figure 2.

Figure 3

Figure 4.Variation of EDL electrostatic potential with salt concentration ($c_\infty$) at $\textrm {pH}_\infty = 4, \ell = 60$ nm for (a) PE-brush-grafted nanochannel, (b) brush-free nanochannel. All parameters are the same as mentioned in figure 2.

Figure 4

Figure 5.Variation of surface charge density ($\bar{\sigma}_{c,eq}$) with salt concentration ($c_\infty$) for PE brushes. All parameters are same as mentioned in figure 2.

Figure 5

Figure 6.Variation of (a) $\bar {E}_{t}$ and (b) $\bar {E}_{t,N}$ (see (3.2) for the definition of $\bar {E}_{t,N}$) with salt concentration ($c_\infty$) in the presence of applied temperature gradient. In the inset of panel (b), we show the logarithmic plot of variation of $\bar {E}_{t,N}$ with salt concentration. All parameters are the same as mentioned in figure 2.

Figure 6

Figure 7.Variation of (a) $\bar {E}_{osm}$ and (b) $\bar {E}_{adv}$ (see (3.3) for the definitions of $\bar {E}_{adv}$) with salt concentration ($c_\infty$) in the presence of applied temperature gradient. In the inset of panel (b), we provide a magnified view of the variation of $\bar {E}_{adv}$ at higher salt concentration. All parameters are the same as mentioned in figure 2.

Figure 7

Figure 8.Velocity profile in the presence of applied temperature gradient for various salt concentration, pH and grafting density. Solid line represents brush-grafted cases while dotted line represents brushless case for (a) $\textrm {pH}_\infty =3,~\ell = 60$ nm, (b) $\textrm {pH}_\infty =3,~\ell = 10$ nm and (c) $\textrm {pH}_\infty =4,~\ell = 60$ nm. All parameters are the same as mentioned in figure 2. Here $\bar {u}={u}/{U}$, where $U = {\epsilon _0 \epsilon _r (k_BT)^2}/{e^2 \eta L} = 1.046 \times 10^{-8}~$ m s$^{-1}$ (based on the parameters given in figure 2).

Figure 8

Figure 9.Comparison of the COS velocity ($\bar {u}_{COS}$), thermal velocity ($\bar {u}_{T}$) and total TOS velocity ($\bar {u}_{total}$) in the presence of applied temperature gradient for brush-grafted nanochannels and brushless nanochannel for the parameters $\textrm {pH}_\infty =3, ~\ell =60$ nm for (a) $c_\infty =10^{-1}$ M (inset providing a closer view of the COS and thermal components), (b) $c_\infty =10^{-2}$ M, (c) $c_\infty =10^{-3}$ M, (d) $c_\infty =10^{-4}$ M, (e) $c_\infty =10^{-5}$ M. The solid lines represent the velocity components in the PE-brush-grafted nanochannel and the dotted lines represent the velocity components in the corresponding brushless nanochannels. All parameters are the same as mentioned in figure 2.

Figure 9

Figure 10.Comparison of the COS velocity ($\bar {u}_{COS}$), thermal velocity ($\bar {u}_{T}$) and total TOS velocity ($\bar {u}_{total}$) in the presence of applied temperature gradient for brush-grafted nanochannels and brushless nanochannel for the parameters $\textrm {pH}_\infty =3, ~\ell =10$ nm for (a) $c_\infty =10^{-1}$ M, (b) $c_\infty =10^{-2}$ M, (c) $c_\infty =10^{-3}$ M, (d) $c_\infty =10^{-4}$ M, (e) $c_\infty =10^{-5}$ M. The solid lines represent the velocity components in the PE-brush-grafted nanochannel and the dotted lines represent the velocity components in the corresponding brushless nanochannels. All parameters are the same as mentioned in figure 2.

Figure 10

Figure 11.Comparison of the COS velocity ($\bar {u}_{COS}$), thermal velocity ($\bar {u}_{T}$) and total TOS velocity ($\bar {u}_{total}$) in the presence of applied temperature gradient for brush-grafted nanochannels and brushless nanochannel for the parameters $\textrm {pH}_\infty =4, ~\ell =60$ nm for (a) $c_\infty =10^{-1}$ M, (b) $c_\infty =10^{-2}$ M, (c) $c_\infty =10^{-3}$ M, (d) $c_\infty =10^{-4}$ M, (e) $c_\infty =10^{-5}$ M. The solid lines represent the velocity components in the PE-brush-grafted nanochannel and the dotted lines represent the velocity components in the corresponding brushless nanochannels. All parameters are the same as mentioned in figure 2.

Figure 11

Figure 12.Comparison of dimensionless electric field induced by the TOS transport (present study) and the diffusio-osmotic transport (Sivasankar et al.2020a). The parameters used for obtaining this thermo-osmotically induced electric field are: $k_B = 1.38 \times 10^{-23}\ \textrm {JK}^{-1}$, temperature gradient $\boldsymbol {\nabla } T=\textrm {d}T/{\textrm {d} x}= 20\ \textrm {Km}^{-1}, T = 298\ \textrm {K}, e = 1.6\times 10^{-19}\ \textrm {C}$ (elementary charge), $\epsilon _0 = 8.8 \times 10^{-12}\ \textrm {Fm}^{-1}$ (permittivity of free space), $\epsilon _r = 79.8$ (relative permittivity of water), $N = 400, h = 100\ \textrm {nm}, L = 0.05\ \textrm {m}, a = 1$ nm (Kuhn length), $\gamma a^3=1, pK_a = 3.5$, $\nu = 0.5$, $\omega = 0.1$. Other parameters are $Q_+ = 3460\ \textrm {J}\ \textrm {mol}^{-1}, Q_- = 530 \ \textrm {J}\ \textrm {mol}^{-1}, Q_{\textrm {H}^+} = 13.3 \times 10^{3}\ \textrm {J}\ \textrm {mol}^{-1}, Q_{\textrm {OH}^-} = 17.2\times 10^{3}\ \textrm {J}\ \textrm {mol}^{-1}$ (Agar et al.1989), $D_+ = 1.330 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}, D_- = 2.030 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}, D_{\textrm {H}^+} =9.310 \times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}, D_{\textrm {OH}^-} = 5.270\times 10^{-9}\ \textrm {m}^2\ \textrm {s}^{-1}$ (Haynes 2014). All the parameters used for obtaining this diffusio-osmotically induced electric field are the same as that used for obtaining TOF based electric field except for the applied concentration gradient which is taken as $\boldsymbol {\nabla } {n_\infty } = 10^{-1}n_\infty$. Please see (Sivasankar et al.2020a) for the expression for diffusio-osmotically induced electric field. We considerthree cases in this figure: case 1, $\textrm {pH}_\infty = 3$, $\ell = 60$ nm; case 2, $\textrm {pH}_\infty = 3$, $\ell = 10$ nm; case 3, $\textrm {pH}_\infty = 4$, $\ell = 60$ nm.

Figure 12

Figure 13.Comparison of velocity field ($u =\bar {u}U_i$) ($i =TOF,DOF$) for the TOS transport (present study) and the diffusio-osmotic transport (Sivasankar et al.2020a) in a nanochannel grafted with backbone-charged PE brushes for (a) $\textrm {pH}_\infty = 3$, $\ell = 60$ nm, (b) $\textrm {pH}_\infty = 3$, $\ell = 10$ nm, (c) $\textrm {pH}_\infty = 4$, $\ell = 60$ nm. Here, $U_{TOF} = {\epsilon _0 \epsilon _r (k_BT)^2}/{e^2 \eta L}$ and $U_{DOF} = ({2 (k_BT) \lambda ^2_{EDL}}/{\eta }) \boldsymbol {\nabla } n_\infty$. The solid lines represent the velocity profiles of the TOS transport, and the dotted lines represent the velocity profiles of the DOS transport.

Supplementary material: File

Sivasankar et al. supplementary material

Sivasankar et al. supplementary material

Download Sivasankar et al. supplementary material(File)
File 799 KB