Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T15:59:34.051Z Has data issue: false hasContentIssue false

Elasto-inertial focusing and rotating characteristics of ellipsoidal particles in a square channel flow of Oldroyd-B viscoelastic fluids

Published online by Cambridge University Press:  14 October 2024

Xiao Hu
Affiliation:
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, PR ChinaDepartment of Mechanics, State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, Zhejiang 310027, PR China
Jianzhong Lin*
Affiliation:
Faculty of Mechanical Engineering and & Mechanics, Ningbo University, Ningbo, Zhejiang 315201, PR ChinaDepartment of Mechanics, State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, Zhejiang 310027, PR China
Zuchao Zhu
Affiliation:
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, PR China
Zhaosheng Yu
Affiliation:
Department of Mechanics, State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, Zhejiang 310027, PR China
Zhaowu Lin
Affiliation:
Department of Mechanics, State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, Zhejiang 310027, PR China
Xiaojun Li
Affiliation:
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, PR China
*
†Email address for correspondence: mecjzlin@public.zju.edu.cn

Abstract

The elasto-inertial focusing and rotating characteristics of spheroids in a square channel flow of Oldroyd-B viscoelastic fluids are studied by the direct forcing/fictitious domain method. The rotational behaviours, changes in the equilibrium positions and travel distances are explored to analyse the mechanisms of spheroid migration in viscoelastic fluids. Within the present simulated parameters (1 ≤ Re ≤ 100, 0 ≤ Wi ≤ 2, 0.4 ≤ α ≤3), the results show that there are four kinds of equilibrium positions and six (five) kinds of rotational behaviours for the elasto-inertial migration of prolate (oblate) spheroids. We are the first to identify a new rotational mode for the migration of prolate spheroids. Only when the particles are initially located at a corner and wall bisector, some special initial orientations of the spheroids have an impact on the final equilibrium position and rotational mode. In other general initial positions, the initial orientation of the spheroid has a negligible effect. A higher Weissenberg number means the faster the particles migrate to the equilibrium position. The spheroid gradually changes from the corner (CO), channel centreline (CC), diagonal line (DL) and cross-section midline (CSM) equilibrium positions as the elastic number decreases, depending on the aspect ratio, initial orientation and rotational behaviour of the particles and the elastic number of the fluid. When the elastic number is less than the critical value, the types of rotational modes of the spheroids are reduced. By controlling the elastic number near the critical value, spheroids with different aspect ratios can be efficiently separated.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Simulation set-up. (a) Schematic of particle migration in three-dimensional square channel flow of Oldroyd-B viscoelastic fluids; the space-fixed coordinate system and body-fixed coordinate system for the (b) prolate spheroid and (c) oblate spheroid. The sphere, prolate and oblate spheroids are represented by blue, grey and pink colours, respectively.

Figure 1

Figure 2.Rotational mode classification for the prolate (first line) and oblate (second line) spheroids with (a,g) tumbling (TU) mode; (b,h) tumbling mode in a diagonal plane (TUD); (c,i) log-rolling (LR) mode; (d,j) inclined log-rolling (ILR) mode; (e) vibrated inclined log-rolling (VILR) mode; ( f,k) kayaking mode.

Figure 2

Figure 3.Effect of the Weissenberg number on the trajectories of the prolate and oblate spheroids in the channel cross-section with Re = 1. (a) Wi = 0.01, α = 2 (top figure), α = 0.5 (bottom figure); (b) Wi = 1, α = 2; (c) Wi = 2, α = 2; (d) Wi = 0.5, α = 0.5; (e) Wi = 1, α = 0.5; ( f) Wi = 2, α = 0.5.

Figure 3

Figure 4.Long-time evolution of the orientation for the (a) prolate spheroid in the LR, VILR and ILR modes and (b) oblate spheroid in the LR, kayaking and TUD modes when the Weissenberg number is reduced from top to bottom, the particle is initially placed at a corner with (xin, yin) = (0.395, 0.395).

Figure 4

Figure 5.Effect of the Weissenberg number on the travel distance for the (a) prolate (α = 2) and (b) oblate (α = 0.5) spheroids when Re = 1 and (xin, yin) = (0.2, 0.395).

Figure 5

Figure 6.Effect of the particle aspect ratio on spheroid migration with Wi = 1 and Re = 1: (a) oblate spheroid with α = 0.6; (b) sphere with α = 1 and (c) prolate spheroid with α = 3. (d) Phase diagram of the final equilibrium position; here, the initial position in the x-axis is changed from 0.05 to 0.395, and the initial position in the y-axis is fixed as 0.395. (e) Long-time evolution of the orientation angle for the spheroid with (xin, yin) = (0.395, 0.395), and α = 0.6, 1.5, 3. The corresponding rotational modes are kayaking, TUD and ILR modes, respectively.

Figure 6

Figure 7.Effect of the aspect ratio on the changes in the travel distance towards the CC equilibrium position.

Figure 7

Figure 8.Velocity contours and the streamlines when the particles at the final equilibrium position with Re = 1 move into the paper. The particle maintains the CC equilibrium position with (Wi, α) = (a) (0.01, 2), (b) (1, 2), (c) (1, 1) and the CO equilibrium position with (Wi, α) = (d) (1, 2), (e) (1, 1.5). The oblate spheroid maintains the CC equilibrium position with (Wi, α) = ( f) (0.01, 0.5), (g) (0.5, 0.5) and the CO equilibrium position with (Wi, α) = (h) (0.5, 0.5), (i) (1, 0.5), ( j) (1, 0.6). The typical cross-section ahead of the particle centre by a distance of the major axis of the spheroid is chosen.

Figure 8

Figure 9.Effect of elastic number on the trajectories of the prolate (first line, α = 2) and oblate (second line, α = 0.5) spheroids in the channel cross-section when Re = 10 with (a,d) Wi = 0.01, El = 0.001; (b,e) Wi = 0.1, El = 0.01; (c,f) Wi = 1, El = 0.1.

Figure 9

Figure 10.Long-time evolution of the orientation for the (a) prolate spheroid in the ILR, ILR and TUD modes and (b) oblate spheroid in the LR, kayaking and ILR modes, the elastic number is reduced from top to bottom. The particle is initial placed at a corner with (xin, yin) = (0.395, 0.395) and Re = 10.

Figure 10

Figure 11.Effect of elastic number on the trajectories of the prolate (first line, α = 2) and oblate (second line, α = 0.5) spheroids in the channel cross-section when Re = 100 with (a) Wi = 0.01, El = 0.0001; (b) Wi = 0.5, El = 0.005; (c) Wi = 1, El = 0.01; (d) Wi = 0.01, El = 0.0001; (e) Wi = 1, El = 0.01; (c) Wi = 2, El = 0.02.

Figure 11

Figure 12.Long-time evolution of the orientation for the (a) prolate spheroid in the LR, TUD and TU modes and (b) oblate spheroid in the kayaking, ILR and LR modes, the elastic number is reduced from top to bottom. The particle is placed at a corner with (xin, yin) = (0.395, 0.395) and Re = 100.

Figure 12

Figure 13.Changes in the equilibrium position for the migration of the prolate (α = 2) and oblate (α = 0.5) spheroids at different elastic numbers. The green dashed line shows the theoretically calculated critical elastic number.

Figure 13

Figure 14.Effect of the aspect ratio and elastic number on the phase diagram of the equilibrium position; here, the initial particle position is (xin, yin) = (0.395, 0.395).

Figure 14

Figure 15.Effect of aspect ratio and elastic number on the change in the final (a) CSM; (b) DL and CC; and (c) CO equilibrium positions.

Figure 15

Figure 16.Effect of the aspect ratio on the change in the travel distance when (Wi, Re, El) = (a) (1, 100, 0.01); (b) (2, 1, 2).

Figure 16

Figure 17.Effect of elastic number on the velocity contours and the streamlines on the cross-section that is ahead of the prolate (first line, α = 2) and oblate (second line, α = 0.5) spheroid centres by a distance of the major axis. The particle moves into the paper. The particle maintains the CSM equilibrium position with (Wi, Re, El) = (a,f) (0, 100, 0), (b,g) (0.01, 100, 0.0001); the CO equilibrium position with (Wi, Re, El) = (c,h) (0.01, 10, 0.001); (i) (0.1, 10, 0.01); ( j) (1, 100, 0.01); and the CC equilibrium position with (Wi, Re, El) = (d) (0.1, 10, 0.01), (e) (1, 100, 0.01). The prolate spheroid maintains the TU, TU, TUD, LR and LR modes from left to right. The oblate spheroid maintains the LR, LR, ILR, kayaking and kayaking modes from left to right.

Figure 17

Figure 18.Phase diagram of the rotational behaviours for the prolate spheroid with α = 2 (grey half-circle) and oblate spheroid with α = 0.5 (pink half-circle). The parameters are changed from the inner circle to the outer circle as (Wi, Re, El) = (0.1, 100, 0.001), (0.5, 100, 0.005), (1, 100, 0.01), (1, 10, 0.1) and (1, 1, 1).

Figure 18

Figure 19.Effect of the initial orientation on the migration and rotational behaviours when Re = 1 and Wi = 1. (a) Changes in the trajectory in the ZOY plane with (xin, yin) = (0, 0.395). When the initial orientation is changed from top to bottom, the long-time evolution of the orientation angle for the (b) prolate spheroid and (c) oblate spheroid changes from other rotational modes into the LR mode.

Figure 19

Figure 20.Contour of the first normal stress difference on the cross-section. When the spheroids are released at (xin, yin) = (0, 0.395), the prolate and oblate spheroids maintain the (a,e) TU mode with n = (0, 0, 0), (b,f) LR mode with n = (${\rm \pi}$/2, ${\rm \pi}$/2, 0) and (c,g) kayaking mode with n = (${\rm \pi}$/4, ${\rm \pi}$/4, 0). When (xin, yin) = (0.395, 0.395), (d,h) the initial Euler angle n = (0, 0, 0).

Figure 20

Figure 21.Effect of the initial orientation on the migration and rotational behaviours when the prolate (first line, α = 2) and oblate (second line, α = 0.5) spheroids are released at (xin, yin) = (0.395, 0.395) with Re = 1, Wi = 1. The trajectories in the channel cross-section with (a) α = 2 and (d) α = 0.5; the corresponding trajectories in the XOZ and YOZ planes for the (b) prolate spheroid and (e) oblate spheroid in the TUD mode. When the initial orientation is changed from top to bottom, long-time evolution of the orientation for the (c) prolate spheroid in the VILR, VILR and TUD modes, ( f) oblate spheroid in the LR, LR and TUD modes.

Figure 21

Figure 22.Long-time evolution of the orientation for the (a) prolate spheroid in the LR, kayaking and TU modes and (b) oblate spheroid in the LR mode when (Re, Wi) = (100, 0.5).

Figure 22

Figure 23.Effect of initial orientation on the velocity contours and the streamlines on the cross-section that is ahead of the spheroid centre by the distance of the major axis. The particle moves into the paper. When (Wi, Re, El, xin, yin) = (0.5, 100, 0.005, 0, 0.395), the prolate (first line, α = 2) and oblate (second line, α = 0.5) spheroids initially maintain the (a,f) LR mode, (b,g) TU mode and (c) the prolate spheroid maintains the kayaking mode. When (Wi, Re, El, xin, yin) = (0.5, 100, 0.005, 0.395, 0.395), the prolate (α = 2) and oblate (α = 0.5) spheroids at DL equilibrium position maintain the (d) TUD mode and (h) ILR mode, respectively. When (Wi, Re, El, xin, yin) = (0.1, 100, 0.001, 0.395, 0.395), (e) the prolate spheroid (α = 2) maintains the stable TUD mode, (i) the oblate spheroid (α = 0.5) maintains the stable ILR mode, ( j) the typical process of transitioning from the ILR to LR mode for the oblate spheroid.

Figure 23

Figure 24.Effect of the initial orientation on the long-time evolution of the orientation for the (a) prolate spheroid (α = 2) in the TUD mode and (b) oblate spheroid (α = 0.5) in the LR, ILR and ILR modes with (Wi, Re, El, xin, yin) = (0.1, 100, 0.001, 0.395, 0.395).

Figure 24

Figure 25.Comparison of particle orientation between the present result and analytical result (Jeffery 1922).

Figure 25

Figure 26.Comparison of angular velocities of spherical particles freely rotating in an Oldroyd-B viscoelastic fluid with different Weissenberg numbers.