Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T01:47:12.556Z Has data issue: false hasContentIssue false

Impact of a shock wave on a heterogeneous foam film

Published online by Cambridge University Press:  10 December 2020

Quentin Raimbaud
Affiliation:
Université de Rennes, CNRS, IPR (Institut de Physique de Rennes) – UMR 6251, F-35000 Rennes, France
Martin Monloubou
Affiliation:
ENSTA Bretagne, UMR CNRS 6027, Institut de Recherche Dupuy de Lôme – IRDL, F-29806 Brest, France
Steven Kerampran
Affiliation:
ENSTA Bretagne, UMR CNRS 6027, Institut de Recherche Dupuy de Lôme – IRDL, F-29806 Brest, France
Isabelle Cantat*
Affiliation:
Université de Rennes, CNRS, IPR (Institut de Physique de Rennes) – UMR 6251, F-35000 Rennes, France
*
†Email address for correspondence: isabelle.cantat@univ-rennes1.fr

Abstract

Liquid foams are, amongst other applications, used to mitigate shock waves. This aspect has received considerable attention at the macroscopic scale. However, the interaction between foam films and shock waves is still poorly understood and may be an important missing local information to build mitigation models. In this paper, we experimentally identify a new process leading to the foam film rupture, which dominates when the film thickness is sufficiently heterogeneous. Using a two-thickness film with a sharp and localised thickness gradient, we record the deformation of the interface between the thick and the thin parts. We observe the growth of an excess liquid area in the thin part and establish an analytical model and scaling laws which account for this phenomenon. Our results in this ideal configuration are consistent with actual rupture processes at stake in heterogeneous foam films.

Information

Type
JFM Papers
Copyright
© The Author(s), 2020. Published by Cambridge University Press
Figure 0

Figure 1.Side view of the rupture induced by a shock on a foam film with either small thickness gradients (a,b), or large gradients (c,d). The delays after the shock are (a) $t_a \lesssim 100\ \mathrm {\mu }\textrm {s}$; (b) $t_b=t_a+ 200 \ \mathrm {\mu }\textrm {s}$; (c) $t_c \lesssim 30 \ \mathrm {\mu }\textrm {s}$; (d) $t_d = t_c + 100 \ \mathrm {\mu }\textrm {s}$. The insets in (a,c) are front views of the two films, in which the thickness field can be deduced from the interference colours (same scale as the main images).

Figure 1

Figure 2.Side view of the film 0.5 ms after the shock. The vertical lines at the left of the figure are the trace of the meniscus and thus indicate the initial position of the film. In that case, the film is produced in the tube, and boundary effects are smaller. This allows us to visualise the structures which develop at the rear side of the film. The scale bar is 2 mm.

Figure 2

Figure 3.Experimental set-up. The shock tube is oriented along the axis $x$ (horizontal). A frame is pulled out of the foaming solution reservoir at a controlled velocity to produce a foam film at the end of the tube, in the $(y,z)$ plane. The high-speed camera (HC) provides a side view of the film deformation and the spectral camera (SC) records the mirror reflection of a halogen light on the film, and thus measures the film thickness profile along the vertical direction $z$.

Figure 3

Figure 4.Characterisation of the film profiles. (a) Example of raw image of the spectral camera (last image before the shock). (b) Corresponding film thickness profile $h(z)$ obtained using the relation (3.1). (c) Film thicknesses $h_1$ (diamonds) and $h_2$ (full circles) as a function of the motor velocity $V_2$.

Figure 4

Figure 5.Pressure signals as a function of time for the empty tube, at sensors 1 (orange), 2 (green), 3 (blue) and 4 (dark blue); the different apparatus of the set-up are triggered by the sudden increase of the signal at sensor 1. Note that this graph is a raw experimental recording and has therefore a different time origin (wave arrival at sensor 1) than that we are using for our analysis in the following (wave impact on the film).

Figure 5

Figure 6.(a) Schematic side view (in the $y$ or $z$ direction) of the propagation of the shock wave at the exit of the tube. The decay length $L_{decay}$ is given by (3.2). (b) Image of a transmitted shock wave, propagating to the right, in front of the film.

Figure 6

Figure 7.Transmitted to incident shock wave Mach number ratio as a function of the incident shock wave Mach number. For the sake of clarity, results were grouped and averaged over five different Mach number ranges, hence justifying the horizontal error bars. Vertical error bars stand for the experimental dispersion on the transmitted shock wave Mach number measurements.

Figure 7

Figure 8.(a) Definitions of $d_1(z,t)$ and $d_2(t)$, the horizontal positions of, respectively, the thin and thick films (in the domain close to $y=0$, i.e. the central part of the film). The origin of the $x$ axis is located at the back of the solid frame, the latter corresponding to the uniform dark grey area; the origin of the $z$ axis is at the boundary between the thick and the thin parts of the film: the transparent orange strip coincides with the domain of unresolved thickness between both parts of the film, as measured with the spectral camera, and the point $z=0$ is set in the middle of the strip. The image used to define those quantities is the same as image (iv) on the right part of the figure. (b) Side views of the film after the shock impact. Image (i) is taken at $t=0$ (time of the impact on the film). The time interval between each frame is constant and is $20\ \mathrm {\mu }\textrm {s}$. The shock Mach number for this experiment was ${M}= 1.28$.

Figure 8

Figure 9.Magnified view of the images displayed in figure 8, focusing on the growth of the perturbation at the interface between the thin and thick parts of the film.

Figure 9

Figure 10.Front views of the film after the shock impact. The first image is taken at time $t=67\ \mathrm {\mu }\textrm {s}$. The time interval between each frame is $40\ \mathrm {\mu }\textrm {s}$. In (a), the darker line is located along the boundary between the thin and the thick parts of the film, initially at $z=0$ in (a). The width of this deformed strip increases with time. In (d), the first holes appear in the middle of the dark strip and expand in the following images, at the Taylor–Culick velocity. The black arrows in images (d,e) allow us to follow the growth of a particular hole.

Figure 10

Figure 11.(a) Definition of the geometrical quantities $d_2$, $d_{1,max}$ and $A$. (b) Position $d_2$ of the thick part of the film as a function of time. The displayed lines correspond to the averaged Mach numbers defined in § 3.3: 1.17 (dark blue), 1.22 (blue), 1.26 (turquoise), 1.29 (green) and 1.32 (orange). The shaded area stands for the experimental dispersion on the turquoise curve ($M = 1.26$). The initial position of the film, $x_0$, obtained from the fitting procedure described in § 4.2.2, has been subtracted from $d_2$ for better readability.

Figure 11

Figure 12.Velocity of the thick film $U$ as a function of the Mach numbers ${M}$ (circles) and ${M}_{ext}$ (squares). This film velocity is compared to the prediction of (5.9) (solid line).

Figure 12

Figure 13.Film position difference $d_{1,max}- d_2$ as a function of time. The displayed lines correspond to the same averaged Mach numbers presented in figure 11. The shaded area stands for the experimental dispersion on the turquoise curve ($M = 1.26$).

Figure 13

Figure 14.Schematic of the different waves during the acceleration stage. The dotted lines indicate the characteristic lines used to relate the properties of the gas at a point on the film to its known properties in the state (0) (downstream) or in the state (a) (upstream). The position $x^\ast$ and time $t^\ast$ at which the transmitted shock appears are also indicated. See text for further details.

Figure 14

Figure 15.Velocity of the film, rescaled by the linear asymptotic velocity $U_{lin}$ (5.9), as a function of dimensionless time $t/\tau _1$. Blue and red solid lines represent the 1-D model predictions for thin and thick parts, respectively (5.8). The dashed steps represent the simplified motion we are considering in this section. Based on the measured film thicknesses, and the definition of $\tau$ in § 5.1.2, we have taken $\tau _2 = 2\tau _1$.

Figure 15

Figure 16.Schematic view of the pressure and velocity fields on both sides of the thin film ($z>0$) and thick film ($z<0$), in the weak shock limit, at a time $t$ between $\tau _1$ and $\tau _2$. The red, solid lines represent the shock waves, moving at a velocity $c \approx a_0$; the black arrows represent the gas velocities (with black dots for gas at rest); the grey background is representative of the pressure level: $P_0$ in white, $P_0+ {\rm \Delta} P$ in light grey and $P_0+ 2 {\rm \Delta} P$ in dark grey. The velocity of the film being noticeably smaller than that of the shock waves, we neglect the motion of the thin part at the considered time. (a) Prediction of the 1-D model of § 5.1, leading to unphysical discontinuities along the line segments $L_{u}$ and $L_{d}$. (b) Compression and rarefaction waves (respectively red and blue dashed lines) propagating along the $z$-direction at a velocity $a_0$, inducing a vertical flux downwards (respectively upwards) downstream of (respectively upstream) the film.

Figure 16

Figure 17.(a) Rescaled excess area $A(t)/A_0$, averaged over all data, as a function of time for all the experiments. The grey shaded area represents the dispersion of the data. The red, solid line is the linear prediction of (5.17) with the prefactor $K = 1.5$. (b) Film position difference $d_{1,max}- d_2$ as a function of time, rescaled by $a_0 \delta \tau$ (same data as in figure 13). The displayed lines correspond to different Mach numbers (same convention as in figure 11). The shaded area stands for the experimental dispersion on the turquoise curve ($M = 1.26$). The grey dotted line is the prediction of (5.18) with the prefactor $K' =2$.

Figure 17

Figure 18.Zoom on an individual structure in the deformed film, at times 15, 20, 25, 30 and $60\ \mathrm {\mu }\textrm {s}$ after the shock (which propagates downwards). The red and green segments in figure (c) represent respectively the lengths $R_2$ and $2 R_1$ of the structure of interest; the horizontal white line is the position $x_f$ of the film as defined in the text. Panel (d) shows the last measurable image of the sequence, as a hole, underlined in blue, appears. The scale bar in (a) is 1 mm.

Figure 18

Figure 19.Volume trapped in the individual structure of figure 18 as a function of time. The black solid line is the prediction from (5.19).

Figure 19

Table 1.Examples of analysed structures at the rear of the films. The structure width $R_1$ is measured on a few successive images and averaged over time; the incoming shock amplitude ${\rm \Delta} P$ is deduced from the film mean asymptotic velocity $U$; the thickness difference $\delta h$ is deduced from the structure volume variation rate, using the prediction (5.19), in which $K$ has been set to 1.5 (see figure 17).