Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T01:47:29.396Z Has data issue: false hasContentIssue false

Columnar vortices induced by dielectrophoretic force in a stationary cylindrical annulus filled with a dielectric liquid

Published online by Cambridge University Press:  15 December 2020

Changwoo Kang
Affiliation:
Laboratoire Ondes et Milieux Complexes (LOMC), UMR 6294, Normandie Université, UNIHAVRE, CNRS-Université du Havre, 53 Rue de Prony, CS 80540, 76058 Le Havre CEDEX, FranceDepartment of Mechanical Engineering, Jeonbuk National University, 567 Baekje-daero, Deokjin-gu, Jeonju-si, Jeollabuk-do, 54896, Republic of Korea
Innocent Mutabazi*
Affiliation:
Laboratoire Ondes et Milieux Complexes (LOMC), UMR 6294, Normandie Université, UNIHAVRE, CNRS-Université du Havre, 53 Rue de Prony, CS 80540, 76058 Le Havre CEDEX, France
*
† Email address for correspondence: innocent.mutabazi@univ-lehavre.fr

Abstract

The dynamics of flow of a dielectric fluid in a vertical cylindrical annulus with a fixed temperature difference and an increasing alternating electric tension has been investigated using a direct numerical simulation (DNS). The temperature difference imposed on the cylindrical surfaces induces a radial temperature gradient perpendicular to the ground gravity which generates a baroclinic flow ascending near the hot surface and descending near the cold one. The electric field coupled with the permittivity gradient generates a dielectrophoretic buoyancy force which is a source of vorticity. Above a critical value of the electric tension, the flow bifurcates to a pattern of stationary columnar vortices. These columnar vortices which characterize the thermoelectric convection are not axially invariant, in contrast with classical Taylor columns. They bifurcate to regular wave patterns and then to spatio-temporal chaotic patterns when the electric field intensity is increased. The flow and temperature fields, the kinetic energy and the enstrophy of thermoelectric convective regimes are computed for different values of the electric tension.

Information

Type
JFM Papers
Copyright
© The Author(s), 2020. Published by Cambridge University Press
Figure 0

Figure 1.Flow configuration: a cylindrical annulus of inner and outer radii R1 and R2 maintained at two different temperatures T1 and T2, respectively. The annulus has a length H and gap width d = R2 − R1. A high-frequency electric tension with effective value V0 is applied to the inner cylinder while the outer electrode is grounded.

Figure 1

Table 1.Characteristic electric tension Vc for a few dielectric liquids $({\epsilon_0} = 8.854 \times {10^{ - 12}}(\textrm{kg} \,\textrm{m}/{(\textrm{V} \, \textrm{s})^2}))$.

Figure 2

Table 2.Values of the conversion coefficient C for ${\gamma _e} = {10^{ - 2}}$ in a cylindrical annular cavity for different values of the radius ratio η.

Figure 3

Figure 2.Base state flow and temperature fields for VE = 1000; contours of temperature with velocity vectors plotted every two points in each direction (a) near the bottom plate, (b) in the middle and (c) near the top plate. (d) Contour of azimuthal vorticity $({\omega _\varphi })$, (e) iso-surface of ${\omega _\varphi } = 6$ and (f) iso-surface of $Q = 0.5$ (Jeong & Hussain 1995).

Figure 4

Figure 3.Profiles of the temperature with (a) radial and (b) axial directions in the base state for VE = 1000.

Figure 5

Figure 4.Profiles of vertical temperature gradient in the base flow for VE = 1000.

Figure 6

Figure 5.Distributions of vertical heat flux $({J_z})$ across the r–φ plane for base flow state. Inset: effect of the electric tension on the heat flux.

Figure 7

Figure 6.Columnar vortices and vorticity components for VE = 1500: (a) three-dimensional vortical structure illustrated by iso-surfaces of Q = 0.5, (b) iso-surface of the radial vorticity ${\omega _r} ={\pm} 4$, (c) iso-surface of the azimuthal vorticity ${\omega _\varphi } = 8$ and (d) iso-surface of the axial vorticity ${\omega _z} ={\pm} 1$ (positive: red, negative: blue).

Figure 8

Figure 7.Vorticity variation with electric tension: contours of axial vorticity component $({\omega _z})$ at the central surface (x = 0.5) for (a) VE = 1500 and (b) VE = 2000. (c) Azimuthally averaged absolute value of the axial vorticity at x = 0.5 in the flow with columnar vortices for three values of VE.

Figure 9

Figure 8.Profiles of the enstrophy $({\omega ^2})$ and the components $(\omega _i^2)$ per unit of length averaged on (r, φ) plane for a few values of ${V_E} \in \{ 1000,\; 1200,1500,\; 2000\} $.

Figure 10

Table 3.Volume-averaged values of enstrophy $({\omega ^2})$ and squared vorticities $(\omega _i^2)$.

Figure 11

Figure 9.Radial profiles of (a) gravitational buoyancy and (b) DEP buoyancy along the radial direction at several locations in the z-direction for VE = 1200.

Figure 12

Figure 10.Axial profiles of (a) Archimedean buoyancy and (b) DEP buoyancy at x = 0.5 for various ${V_E} \in \{ 1000,\; 1200,\; 1500,\; 2000\} $.

Figure 13

Figure 11.Time sequence of the axial vorticity $({\omega _z})$ at the central surface (x = 0.5) with the time interval (period) of 0.875 between figures for VE = 2500.

Figure 14

Figure 12.Oscillation of columnar vortices for VE = 2500: (a) space–time diagram of the axial vorticity $({\omega _z})$ along the axial direction (x = 0.5, φ = ${\rm \pi}$, z) and (b) time history of the kinetic energy per unit volume $({E_k} = {u^2}/{2_V})$.

Figure 15

Figure 13.Instantaneous structures of vortices and temperature field for VE = 3000; contours of (a) Q and (b) temperature (θ) distributions along the azimuthal direction at the central surface (x = 0.5) and (c) iso-surface of Q = 7.

Figure 16

Figure 14.Instantaneous 3-D vortical structures in the annulus for high values of the electric tension: (a) VE = 4000 (Q = 20), (b) VE = 6000 (Q = 60), (c) VE = 8000 (Q = 120) and (d) VE =  10 000 (Q = 200).

Figure 17

Figure 15.Time series and power spectra of the kinetic energy $({E_k})$ for VE = 3000 and VE = 6000. Values over the peaks are dimensionless frequencies.

Figure 18

Figure 16.Variations with the applied electric tension VE of (a) the time-averaged kinetic energy (Ek) normalized by the kinetic energy in the absence of the electric field (${E_k} = 1.303$ for ${V_E} = 0$) and (b) different terms of the kinetic energy balance equation (2.8).

Figure 19

Figure 17.Time- and volume-averaged enstrophy $({\omega ^2})$ against VE. Here, ${\langle {\omega ^2}\rangle _V} = 121.53$ for ${V_E} = 0$.

Figure 20

Figure 18.Helical vortices in the annulus cavity with fixed ΔT for $g = 0$ and ${V_E} = 1000$. (a) Iso-surface of $Q = 0.5$, contours of (b) azimuthal vorticity $({\omega _\varphi })$ and (c) axial vorticity $({\omega _z})$ in a r–z plane and (d) contour of axial vorticity component $({\omega _z})$ at the central surface (x = 0.5).

Kang and Mutabazi supplementary movie 1

See pdf file for movie caption

Download Kang and Mutabazi supplementary movie 1(Video)
Video 914.7 KB

Kang and Mutabazi supplementary movie 2

See pdf file for movie caption

Download Kang and Mutabazi supplementary movie 2(Video)
Video 1.9 MB

Kang and Mutabazi supplementary movie 3

See pdf file for movie caption

Download Kang and Mutabazi supplementary movie 3(Video)
Video 2.6 MB

Kang and Mutabazi supplementary movie 4

See pdf file for movie caption

Download Kang and Mutabazi supplementary movie 4(Video)
Video 4.4 MB

Kang and Mutabazi supplementary movie 5

See pdf file for movie caption

Download Kang and Mutabazi supplementary movie 5(Video)
Video 4.5 MB
Supplementary material: PDF

Kang and Mutabazi supplementary material

Captions for movies 1-5

Download Kang and Mutabazi supplementary material(PDF)
PDF 71.3 KB