Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T12:47:10.206Z Has data issue: false hasContentIssue false

Effects of wall temperature on hypersonic shock wave/turbulent boundary layer interactions

Published online by Cambridge University Press:  14 August 2024

Ji Zhang
Affiliation:
LHD, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, PR China
Tongbiao Guo
Affiliation:
LHD, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
Guanlin Dang
Affiliation:
AI for Science Institute, Beijing 100080, PR China
Xinliang Li*
Affiliation:
LHD, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, PR China
*
†Email address for correspondence: lixl@imech.ac.cn

Abstract

Wall temperature has a significant effect on shock wave/turbulent boundary layer interactions (STBLIs) and has become a non-negligible factor in the design process of hypersonic vehicles. In this paper, direct numerical simulations are conducted to investigate the wall temperature effects on STBLIs over a 34° compression ramp at Mach number 6. Three values of the wall-to-recovery-temperature ratio (0.50, 0.75 and 1.0) are considered in the simulations. The results show that the size of the separation bubble declines significantly as the wall temperature decreases. This is because the momentum profile of the boundary layer becomes fuller with wall cooling, which means the near-wall fluid has a greater momentum to suppress flow separation. An equation based on the free-interaction theory is proposed to predict the distributions of the wall pressure upstream of the corner at different wall temperatures. The prediction results are generally consistent with the simulation results (Reynolds number Reτ ranges from 160 to 675). In addition, the low-frequency unsteadiness is studied through the weighted power spectral density of the wall pressure and the correlation between the upstream and downstream. The results indicate that the low-frequency motion of the separation shock is mainly driven by the downstream mechanism and that wall cooling can significantly suppress the low-frequency unsteadiness, including the strength and streamwise range of the low-frequency motions.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Table 1.Previous studies using OpenCFD-SC or OpenCFD-SCU.

Figure 1

Figure 1.Diagram of the computational domain and mesh: ${L_y}$ and ${L_z}$ represent the height and width of the computational domain, respectively; ${L_{x1}}$ and ${L_{x2}}$ represent the lengths of the flat-plate in the flat-plate region and corner region, respectively; ${L_{x3}}$ represents the length of the ramp in the corner region.

Figure 2

Table 2.Mesh number and resolution.

Figure 3

Figure 2.Diagram of Mesh 3-1 (x–y plane). The mesh is plotted every 20 points in both x and y directions.

Figure 4

Table 3.Boundary layer parameters at x = −70 mm.

Figure 5

Figure 3.Streamwise distributions of the mean (a–c) wall pressure and (d–f) skin friction coefficient near the corner in the cases of (a,d) ${T_w}/{T_r} = 0.50$, (b,e) ${T_w}/{T_r} = 0.75$ and (c,f) ${T_w}/{T_r} = 1.0$.

Figure 6

Figure 4.Two-point correlation coefficients of the three components of velocity at the reference position with y+ = 50 in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$.

Figure 7

Figure 5.Profiles of (a) the van Driest transformed mean velocity and (b) velocity fluctuations at xref.

Figure 8

Figure 6.Temperature‒velocity relations and total temperature profiles at xref.

Figure 9

Figure 7.Profiles of (a) TKE production, (b) turbulence transport, (c) pressure diffusion, (d) pressure dilation, (e) viscous diffusion, (f) viscous dissipation terms and (g) sum of all TKE budget terms at xref.

Figure 10

Figure 8.Contours of the instantaneous skin friction coefficient in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$.

Figure 11

Figure 9.Spanwise distributions of the instantaneous skin friction coefficient at xref in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$.

Figure 12

Figure 10.Iso-surfaces of instantaneous Q = 0.1 coloured by the streamwise velocity in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$. Each case contains three locally enlarged subgraphs, corresponding to the flat-plate boundary layer, separation bubble and reattached boundary layer, respectively.

Figure 13

Figure 11.Contours of the mean vorticity in the x–y plane in the cases of (a,d) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$. The green dashed line in each case is the isoline of $\bar{\omega } = {\omega _{ref}}$, where ${\omega _{ref}}$ is the vorticity at the position with the coordinates (x, y) = (xref, δ).

Figure 14

Figure 12.Contours of the mean streamwise velocity and streamlines in the x–y plane in the cases of (a,d) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$, where panel (d) is the locally enlarged view of panel (a).

Figure 15

Figure 13.Profiles of the mean (a) density, (b) velocity and (c) momentum density at xref.

Figure 16

Figure 14.Contours of the turbulence kinetic energy in the x–y plane in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$.

Figure 17

Figure 15.Streamwise distributions of the mean (a) skin friction coefficient and (b) wall pressure at different wall temperatures.

Figure 18

Table 4.Locations of some special points.

Figure 19

Table 5.Parameters of the present DNS based on the cases of Zhu et al. (2017).

Figure 20

Figure 16.Profiles of the van Driest transformed mean velocity at xref = −50 mm with M∞ = 2.9.

Figure 21

Figure 17.Streamwise distributions of the mean (a) skin friction coefficient and (b) wall pressure at different wall temperatures with M∞ = 2.9.

Figure 22

Figure 18.(a) Correlation function F plotted through ${x^\ast }$ and its detail view at (b) M∞ = 2.9 and (c) M∞ = 6.0. The black dashed lines indicate the corner positions.

Figure 23

Figure 19.(a) Correlation function F plotted through χ and its detail view at (b) M∞ = 2.9 and (c) M∞ = 6.0. The black dashed lines indicate the corner positions.

Figure 24

Figure 20.Correlation function F plotted through χ based on the data of Volpiani et al. (2020).

Figure 25

Table 6.Actual and predicted lengths, where ‘/’ means such quantity is not applicable to the case of ${T_w}/{T_r} = 0.50$ as it is taken as the reference.

Figure 26

Figure 21.Prediction results of the mean wall pressure at (a) M∞ = 2.9 and (b) M∞ = 6.0 using (3.28).

Figure 27

Figure 22.Evolution of the wall pressure at the station with the coordinates (x, y, z)/δ = (−4.39, 0, 3.68) in the case of ${T_w}/{T_r} = 1.0$.

Figure 28

Figure 23.Contours of the wall pressure WPSD in the cases of (a) ${T_w}/{T_r} = 0.50$, (b) ${T_w}/{T_r} = 0.75$ and (c) ${T_w}/{T_r} = 1.0$.

Figure 29

Figure 24.Streamwise distributions of the low-frequency energy proportion.

Figure 30

Table 7.Streamwise coordinates ($x/\delta $) of each station.

Figure 31

Figure 25.Correlation coefficients with delay time between the wall pressure at each station and that at Station 5 in the cases of (a,b) ${T_w}/{T_r} = 0.50$, (c,d) ${T_w}/{T_r} = 0.75$ and (e,f) ${T_w}/{T_r} = 1.0$.

Figure 32

Figure 26.Correlation coefficients with delay time between the wall pressure at each station and the low-pass filtered wall pressure at Station 5 in the cases of (a,b) ${T_w}/{T_r} = 0.50$, (c,d) ${T_w}/{T_r} = 0.75$ and (e,f) ${T_w}/{T_r} = 1.0$.