Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T17:43:17.850Z Has data issue: false hasContentIssue false

Turbulent drag reduction with streamwise-travelling waves in the compressible regime

Published online by Cambridge University Press:  21 May 2024

Federica Gattere
Affiliation:
Dipartimento di Scienze e Tecnologie Aerospaziali, Politecnico di Milano, via La Masa 34, 20156 Milano, Italy
Massimo Zanolini
Affiliation:
Dipartimento di Scienze e Tecnologie Aerospaziali, Politecnico di Milano, via La Masa 34, 20156 Milano, Italy
Davide Gatti
Affiliation:
Institute for Fluid Mechanics, Karlsruhe Institute of Technology, Kaiserstr. 10, 76131 Karlsruhe, Germany
Matteo Bernardini
Affiliation:
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, via Eudossiana 18, 00184 Rome, Italy
Maurizio Quadrio*
Affiliation:
Dipartimento di Scienze e Tecnologie Aerospaziali, Politecnico di Milano, via La Masa 34, 20156 Milano, Italy
*
†Email address for correspondence: maurizio.quadrio@polimi.it

Abstract

The ability of streamwise-travelling waves of spanwise velocity to reduce the turbulent skin-friction drag is assessed in the compressible regime. Direct numerical simulations are carried out to compare drag reduction in subsonic, transonic and supersonic channel flows. Compressibility improves the benefits of the travelling waves, in a way that depends on the control parameters: drag reduction becomes larger than the incompressible one for small frequencies and wavenumbers. However, the improvement depends on the specific procedure employed for comparison. When the Mach number is varied and, at the same time, wall friction is changed by the control, the bulk temperature in the flow can either evolve freely in time until the aerodynamic heating balances the heat flux at the walls, or be constrained such that a fixed percentage of kinetic energy is transformed into thermal energy. Physical arguments suggest that, in the present context, the latter approach should be preferred. This provides a test condition in which the wall-normal temperature profile more realistically mimics that in an external flow, and also leads to a much better scaling of the results, over both the Mach number and the control parameters. Under this comparison, drag reduction is only marginally improved by compressibility.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Table 1.Parameters of the six uncontrolled simulations: Mach number $M_w^b$, friction Reynolds number $Re_\tau$, bulk Reynolds number $Re_b$, time step, mesh size and spatial resolution in each direction.

Figure 1

Figure 1.Incompressible drag reduction vs $\kappa _x^+$ and $\omega ^+$, at $A^+ = 12$ and $Re_\tau = 400$. The map is obtained from Gatti & Quadrio (2016) via interpolation of their datasets at $Re_\tau =200$ and $Re_\tau =1000$. The dots on the dashed lines correspond to the present compressible simulations.

Figure 2

Figure 2.Temperature (a), density (b), dynamic viscosity (c) and semi-local Reynolds number (d) profiles in the wall region of a canonical compressible channel flow at $M_w^b=0.3$, $0.8$ and $1.5$, with ZBC (dashed lines) and CBC (continuous lines).

Figure 3

Figure 3.Streamwise velocity fluctuations $u^+$ in a wall-parallel portion of the $x\unicode{x2013}z$ plane at $y^+=10$ for ZBC (a,b) and CBC (c,d) at $M_w^b=0.3$ (a,c) and $M_w^b=1.5$ (b,d) for the uncontrolled case. The blue-to-red colour scale ranges from $-10$ to $+10$; the black line is for the zero contour level.

Figure 4

Figure 4.Frequency $\tilde {\omega }^+$, wavenumber $\tilde {\kappa }_x^+$ and amplitude $\tilde {A}^+$ of the control forcing for the travelling waves at $\kappa _x^+=0.005$ (line 3 of figure 1) made dimensionless with the thermodynamic properties of the actuated flow at $y^+=10$.

Figure 5

Figure 5.Drag reduction rate and power budget as a function of the period $T^+$ for the oscillating wall (line 1 of figure 1, see inset), for ZBC (a) and CBC (b).

Figure 6

Figure 6.Drag reduction rate vs period $T^+$ for the oscillating wall (line 1 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green: solid line without symbols from Gatti & Quadrio (2016), solid symbols from Hurst et al. (2014) and open symbols from Ricco & Quadrio (2008). The blue and black open symbols are from Yao & Hussain (2019) at $M_w^b=0.8, Re_\tau =466$ and $M_w^b=1.5, Re_\tau =506$. Solid lines indicate interpolation. Dashed lines on the right panel are results for ZBC.

Figure 7

Figure 7.Drag reduction rate vs wavenumber $\kappa _x^+$ for the steady waves (line 2 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green and dashed lines are for ZBC, as in figure 6. Red and black open symbols are from Ruby & Foysi (2022) at $M_w^b=0.3, Re_\tau =396$ and $M_w^b=1.5, Re_\tau =604$.

Figure 8

Figure 8.Drag reduction rate vs frequency $\omega ^+$ for the StTW at $\kappa _x^+ = 0.005$ (line 3 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green and dashed lines data are for ZBC, as in figure 6.

Figure 9

Figure 9.Drag reduction rate vs wavenumber $\kappa _x^+$ for the travelling waves at $\omega ^+ = -0.21$ (line 4 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green, and dashed lines are for ZBC, as in figure 6.

Figure 10

Figure 10.Drag reduction rate vs frequency $\omega ^+$ for the travelling waves for the optimal ridge (line 5 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green, and dashed lines are for ZBC, as in figure 6.

Figure 11

Figure 11.Input power for the travelling waves with $\kappa _x^+ = 0.005$ (line 3 of figure 1, see inset) for ZBC (a) and CBC (b). For CBC the two contributions to $P_{in} \%$, i.e. the control power $P_c \%$ and the cooling power $P_\varPhi \%$, are plotted separately. Incompressible data are in green, and dashed lines are for ZBC.

Figure 12

Figure 12.Net power saving for the oscillating wall (line 1 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green; (b) also plots $\mathcal {DR} \% - P_c \%$ (top set of curves), where dashed lines are for ZBC.

Figure 13

Figure 13.Net power saving for the steady waves (line 2 of figure 1, see inset), for ZBC (a) and CBC (b). Incompressible data are in green; (b) also plots $DR \% - P_c \%$ (top set of curves) where dashed lines are for ZBC. Red and black open symbols are from Ruby & Foysi (2022) at $M_w^b=0.3, Re_\tau =396$ and $M_w^b=1.5, Re_\tau =604$.

Figure 14

Figure 14.Net power saving for the travelling waves with $\kappa _x^+ = 0.005$ (line 3 of figure 1, see inset) for ZBC (a) and CBC (b). Incompressible data are in green; (b) also plots $DR \% - P_c \%$ (top set of curves) where dashed lines are for ZBC.

Figure 15

Figure 15.Drag reduction for the StTW at $\kappa _x^+ = 0.005$ measured in the compressible regime vs drag reduction of the incompressible regime when the control parameters are scaled with the thermodynamic properties of each different case at $y^+=10$.

Figure 16

Figure 16.Drag reduction rate and power budget vs wavenumber $\kappa _x^+$ for the steady waves (line 2 of figure 1, see inset), for ZBC (a) and CBC (b).

Figure 17

Figure 17.Drag reduction rate and power budget vs frequency $\omega _x^+$ for the StTW (line 3 of figure 1, see inset), for ZBC (a) and CBC (b).

Figure 18

Figure 18.Drag reduction rate and power budget vs wavenumber $\kappa _x^+$ for the travelling waves at $\omega ^+=-0.21$ (line 4 of figure 1, see inset), for ZBC (a) and CBC (b).

Figure 19

Figure 19.Drag reduction rate and power budget vs frequency $\omega ^+$ for the optimal ridge (line 5 of figure 1, see inset), for ZBC (a) and CBC (b).