Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T22:49:28.063Z Has data issue: false hasContentIssue false

Modeling of a GaN Based Static Induction Transistor

Published online by Cambridge University Press:  13 June 2014

Gabriela E. Bunea
Affiliation:
Dept. of Physics, Boston University, Boston, MA, 02215, gbunea@bu.edu
S.T. Dunham
Affiliation:
Dept. of Electrical and Computer Engineering, Boston University, Boston, MA, 02215
T.D. Moustakas
Affiliation:
Dept. of Electrical and Computer Engineering, Boston University, Boston, MA, 02215

Abstract

Static induction transistors (SITs) are short channel FET structures which are suitable for high power, high frequency and high temperature applications. GaN has particularly favorable properties for SIT operation. However, such a device has not yet been fabricated. In this paper we report simulation studies on GaN static induction transistors over a range of device structures and operating conditions. The transistor was modeled with coupled drift-diffusion and heat-flow equations. We found that the performance of the device depends sensitively on the thermal boundary conditions, as self-heating effects limit the maximum voltage swing.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Cross-section of static induction transistor (SIT) structure considered in this work and the unit cell simulated with critical dimensions labeled.

Figure 1

Figure 2.Electron mobility (a) versus doping level at T=300K [2, 16-19], and (b) versus temperature, for a doping level of 3×1017 cm−3 [19].

Figure 2

Figure 3.Transistor characteristics: (a) drain I-V characteristics, and (b) gain versus frequency. The cut-off frequency is fT=24.8 GHz and maximum frequency of oscillations fmax=76.5 GHz.

Figure 3

Figure 4.Output power and power added efficiency (PAE) versus frequency.