Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:34:25.981Z Has data issue: false hasContentIssue false

A unified temperature transformation for high-Mach-number flows above adiabatic and isothermal walls

Published online by Cambridge University Press:  10 November 2022

Peng E.S. Chen
Affiliation:
Department of Mechanics and Engineering Science, Peking University, Beijing 100871, PR China
George P. Huang
Affiliation:
Mechanical and Materials Engineering, Wright State University, Dayton, OH 45435, USA
Yipeng Shi
Affiliation:
Department of Mechanics and Engineering Science, Peking University, Beijing 100871, PR China
Xiang I.A. Yang*
Affiliation:
Mechanical Engineering, Pennsylvania State University, PA 16802, USA
Yu Lv*
Affiliation:
State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
*
†Email addresses for correspondence: xzy48@psu.edu, lvyu@imech.ac.cn
†Email addresses for correspondence: xzy48@psu.edu, lvyu@imech.ac.cn

Abstract

The mean velocity follows a logarithmic scaling in the surface layer when normalized by the friction velocity, i.e. a velocity scale derived from the wall-shear stress. The same logarithmic scaling exists for the mean temperature when one normalizes the temperature with the friction temperature, i.e. a scale derived from the wall heat flux. This temperature normalization poses challenges to adiabatic walls, for which the wall heat flux is zero, and the logarithmic temperature scaling becomes singular. This paper aims to establish a temperature transformation that applies to both isothermal walls and adiabatic walls. We show that by accounting for the diffusive flux, both the Van Driest transformation and the semi-local transformation (and other transformations alike) apply to adiabatic walls. We also show that the classic Walz equation works well for adiabatic walls because it models the diffusive flux, albeit in a rather crude way. For validation/testing, we conduct direct numerical simulations of supersonic Couette flows at Mach numbers $M=1$, 3 and 6, and various Reynolds numbers. The two walls are adiabatic, and a source term is included to cancel the aerodynamic heating in the domain. We show that the adiabatic wall data collapse onto the same incompressible logarithmic law of the wall like the isothermal wall data.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Table 1.DNS details. Here, $Ma$ is the Mach number (specifically, $Ma=U_w/a_{ref}$ for Couette flows, and $Ma=U_b/a_{ref}$ for channel flows), $a_{ref}=\sqrt {\gamma R T_{ref}}$ is the speed of sound at the reference temperature, $\tilde {T}_w$ is the mean temperature at the wall, $Re_b$ is the bulk Reynolds number (specifically, $Re_b=\rho _b U_w \delta /\mu _{ref}$ for Couette flows, and $Re_b=\rho _b U_b \delta /\mu _{ref}$ for channel flows), $Re_\tau =\bar {\rho }_w u_\tau \delta /\bar {\mu }_w$ is the friction Reynolds number, $Re_\tau ^*=\sqrt {\bar {\rho }/\bar {\rho }_w}(\bar {\mu }_w/\bar {\mu })\,Re_\tau$ is the semi-local-scaled Reynolds number, $N_x$, $N_y$ and $N_z$ are the grid numbers in the streamwise, wall-normal and spanwise directions, $b_g$ is a parameter that controls the grid stretching in the wall-normal direction, ${\rm \Delta} x^*$ and ${\rm \Delta} z^*$ are the largest semi-local-scaled grid spacings in the streamwise and spanwise directions, ${\rm \Delta} y^+$ is the grid spacing at the wall, ${\rm \Delta} y^*$ is the grid space at the centreline, $T_b$ is the bulk temperature (kept constant in time in any given calculation), and $\phi$ is the average body heat source normalized by $\rho _bU_w^3/\delta$.

Figure 1

Figure 1.A sample time history of the friction Reynolds number in M1R15A after the flow reaches a statistically stationary state. Here, $T_f$ is the flow through time, i.e. $T_f=t/(L_x/U_w)$.

Figure 2

Figure 2.Terms in the momentum budget equation, for (a) M1R30A, (b) M3R50A, and (c) M6R25A. Here, $y$ is the distance from the bottom wall. The data are symmetric with respect to the channel centreline, and we show data in the bottom half-channel only.

Figure 3

Figure 3.Terms in the energy budget equation (2.17), for (a) M1R30A, (b) M3R50A, and (c) M6R25A. Here, we have chosen a frame of reference such that the bottom wall is stationary and at $y/\delta =0$.

Figure 4

Figure 4.Instantaneous streamwise velocity at a constant $x$ location in (a) M1R30A, (b) M3R50A, and (c) M6R25A. Instantaneous temperature at a constant location in (d) M1R30A, (e) M3R50A, and (f) M6R25A. Here, $U_w$ is the wall velocity, and $T_b$ is the bulk temperature. For visualization purposes, the colour bar ranges in (d–f) are different.

Figure 5

Figure 5.Instantaneous wall-shear stress in (a) M1R30A, (b) M3R50A, and (c) M6R25A. Instantaneous wall temperature in (d) M1R30A, (e) M3R50A, and (f) M6R25A.

Figure 6

Figure 6.Profiles of (a) temperature, (b) density, (c) dynamic viscosity, and (d) semi-local-scaled wall-normal distance. The insert in (a) shows the temperature profiles in the wall layer.

Figure 7

Figure 7.Velocity profiles: (a) Van Driest transformed (Van Driest 1951); (b) semi-local transformed (Patel et al.2016). The two black lines are $U=y$ and $U=\log (y)/\kappa +B$ (with proper normalization).

Figure 8

Figure 8.Turbulent flow statistics: (a) r.m.s. of the streamwise velocity fluctuation; (b) r.m.s. of the wall-normal velocity fluctuation; (c) r.m.s. of the spanwise velocity fluctuation; (d) r.m.s. of the temperature fluctuation.

Figure 9

Figure 9.(a) Temperature profiles transformed according to the corrected Van Driest transformation (2.1). (b) The eddy conductivity.

Figure 10

Figure 10.Same as figure 9 but for temperature profiles transformed according to the corrected semi-local scaling in (2.2).

Figure 11

Figure 11.Temperature profiles transformed according to (a) (2.41) and (b) (2.40), where the term $\bar {q}$ is modelled according to (2.39).

Figure 12

Figure 12.DNS (lines) and (1.7) (symbols). The recovery factor is set to $r=0.89$. The frame of reference is such that the velocity is 0 at the wall.