Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T19:05:32.512Z Has data issue: false hasContentIssue false

NiIn as an Ohmic Contact to P-GaN

Published online by Cambridge University Press:  13 June 2014

D. B. Ingerly
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, Wisconsin 53706-1595
Y. A. Chang
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, Wisconsin 53706-1595
Y. Chen
Affiliation:
Hewlett-Packard Company, 3500 Deer Creek Road, Palo Alto, California 94304-1392

Abstract

Based on the criteria for the solid state exchange reaction with p-GaN, we have investigated the intermetallic compound NiIn as a possible ohmic contact. The contacts were fabricated by depositing NiIn on p-GaN films (p ∼ 2 × 1017 cm−3) using RF sputtering from a compound target. The as-deposited, NiIn contacts were found to be rectifying and using I-V characterization a Schottky barrier height of 0.82 eV was measured. Rapid thermal annealing of the contacts was shown to significantly decrease their resistance, with contacts annealed at 800 °C for 1 min yielding the lowest resistance. When annealed at 800 °C for 1 min NiIn contacts exhibited a specific contact resistance of 8-9 × 10−3 Ω cm2 as measured by the circular transmission line model. To allow a more universal comparison the more traditional Ni/Au contacts, processed under the same conditions, were used as a standard. Their measured specific contact resistance (ρc = 1.2 − 2.1 × 10−2 Ωcm2) was significantly higher than that of the NiIn contacts. Demonstrating that NiIn has promise as an ohmic contact to p-GaN and should be studied in greater detail.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1(a)I-V behavior of NiIn/p-GaN contacts annealed at 800 °C for 1 min.

Figure 1

Figure 1(b)I-V behavior of NiIn/p-GaN contacts annealed at 750 °C for 1 min.