Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T05:38:10.745Z Has data issue: false hasContentIssue false

Analysis of the pressure buildup behind rigid porous media impinged by shock waves in time and frequency domains

Published online by Cambridge University Press:  26 August 2015

O. Ram
Affiliation:
Pearlstone Center for Aeronautical Engineering Studies, Protective Technologies R&D Center, Department of Mechanical Engineering, Faculty of Engineering Sciences, Ben-Gurion University of the Negev, Beer Sheva 8410501, Israel
O. Sadot*
Affiliation:
Pearlstone Center for Aeronautical Engineering Studies, Protective Technologies R&D Center, Department of Mechanical Engineering, Faculty of Engineering Sciences, Ben-Gurion University of the Negev, Beer Sheva 8410501, Israel
*
†Email address for correspondence: sorens@bgu.ac.il

Abstract

The transformation of a time-dependent pressure pulse imposed on the front face of a rigid porous medium sample, mounted in a tunnel, through the sample and a fixed-volume air gap between the rear face of the sample and the end wall of a tunnel is studied both experimentally and analytically. In the experiments, rigid porous samples that are placed at various distances from a shock tube end wall are subjected to the impingement of shock waves. The pressure buildup behind the porous sample is monitored and compared with the pressure imposed at the front face of the porous sample. The shock tube is fitted with a short driver section in order to generate blast-like decaying pressure profiles, which continue to decay after the initial shock impingement. In this scenario, the measured pressure profile at the end wall, which is affected by the properties of the porous medium and the size of the air gap separating its rear face and the shock tube end wall, is significantly different from the pressure profile imposed on the front face of the porous sample. The mechanism governing the pressure transformation provided by the porous medium is attributed to a selective filtration process that attenuates the pressure changes associated with high frequencies. The results of the present study are also analysed in conjunction with previously published analytical and numerical models to achieve a broader understanding of the physical mechanisms affecting the pressure buildup.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.A schematic illustration of the investigated problem: a shock or blast wave impinges on the front face of a sample made of an open-cell rigid porous material that protects the end wall of a tunnel. A volume is confined between the rear face of the porous sample and the end wall. PT2 and PT3 are pressure transducers flush mounted on the side wall. PT4 is a pressure transducer mounted on the end wall.

Figure 1

Figure 2.(a) End wall pressure histories recorded in a set of four experiments with different stand of distance (SOD) and the same number of pores per inch (PPI) and Mach number. (b) The same pressure histories presented in a scaled manner, and a fit to an exponential function.

Figure 2

Figure 3.A schematic illustration of the experimental apparatus set-up and the data acquisition system.

Figure 3

Figure 4.(a) The designed test section in which the porous samples were fixed. In this design, the location of the front face of the porous sample remained fixed while the end wall of the shock tube could be moved to facilitate different standoff distances. (b) A 1.2 m aluminium ‘cookie cutter’ was inserted into the shock tube to negotiate the cross-section area change.

Figure 4

Figure 5.Experimental results highlighting the influence of the porous sample on the peak overpressure at the end wall: (a–c) the influence of the PPI of the sample; (d–f) the influence of the standoff distance. All of the experiments presented were performed with 10 bar driver pressure.

Figure 5

Figure 6.A schematic illustration of the mechanical system that transfers the input pressure waveform to an output pressure waveform. The system parameters are the length of the porous sample, $L$, the standoff distance, SOD, and the porous material properties.

Figure 6

Figure 7.The modal response of the mechanical system comprising the porous sample and the confined volume (see figure 6). Three examples are shown which relate to different configurations of the porous sample, the PPI and the standoff distance, SOD. As the cutoff frequency decreases, the pressure rise becomes slower.

Figure 7

Figure 8.A comparison between the experimental results (solid lines) for a constant-velocity planar shock wave configuration and the corresponding numerical simulations (dashed lines), showing a very good agreement between the two.

Figure 8

Figure 9.(a) The dependence of ${\it\alpha}$ on the Forchheimer and tortuosity coefficients as obtained numerically. (b) The dependence of ${\it\alpha}$ on the Forchheimer coefficient has an exponentially decaying form. (c) The dependence of ${\it\alpha}$ on the tortuosity has a linear increasing manner.

Figure 9

Figure 10.Predicted pressure profiles obtained using (1.1) for experiments performed with (a) 10 bar and (b) 15 bar in the driver section. In this figure, various experiments (coloured solid lines) are compared with the model predictions (dashed lines). In the model, the reference profile (black solid line) was used as the input pressure and ${\it\alpha}$ was taken for a 20 PPI and 30 PPI sample from Ram & Sadot (2013).

Figure 10

Figure 11.(a) The pressure profile recorded on the end wall of a shock tube behind an 18 mm thick layer of granular medium comprising 0.5 mm diameter spheres (resampled from Britan et al.2001, figure 9). (b) The pressure profile recorded on the end wall of a shock tube behind two perforated plates spaced 45 mm from each other and with a standoff distance of 140 mm from the end wall (resampled from Seeraj & Skews 2008, figure 18).