Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T07:34:26.901Z Has data issue: false hasContentIssue false

An experimental investigation of resonant interaction of a rectangular jet with a flat plate

Published online by Cambridge University Press:  21 August 2015

K. B. M. Q. Zaman*
Affiliation:
Inlets and Nozzles Branch, Propulsion Division, NASA Glenn Research Center, Cleveland, OH 44135, USA
A. F. Fagan
Affiliation:
Optics and Photonics Branch, Communication and Intelligent Systems Division, NASA Glenn Research Center, Cleveland, OH 44135, USA
J. E. Bridges
Affiliation:
Acoustics Branch, Propulsion Division, NASA Glenn Research Center, Cleveland, OH 44135, USA
C. A. Brown
Affiliation:
Acoustics Branch, Propulsion Division, NASA Glenn Research Center, Cleveland, OH 44135, USA
*
†Email address for correspondence: khairul.b.zaman@nasa.gov

Abstract

The interaction between an 8:1 aspect ratio rectangular jet and a flat plate, placed parallel to the jet, is addressed in this study. At high subsonic conditions and for certain relative locations of the plate, a resonance takes place with accompanying audible tones. Even when the tone is not audible the sound pressure level spectra are often marked by conspicuous peaks. The frequencies of these peaks, as functions of the plate’s length, its location relative to the jet as well as jet Mach number, are studied in an effort to understand the flow mechanism. It is demonstrated that the tones are not due to a simple feedback between the nozzle exit and the plate’s trailing edge; the leading edge also comes into play in determining the frequency. With parametric variation, it is found that there is an order in the most energetic spectral peaks; their frequencies cluster in distinct bands. The lowest frequency band is explained by an acoustic feedback involving diffraction at the plate’s leading edge. Under the resonant condition, a periodic flapping motion of the jet column is seen when viewed in a direction parallel to the plate. Phase-averaged Mach number data on a cross-stream plane near the plate’s trailing edge illustrate that the jet cross-section goes through large contortions within the period of the tone. Farther downstream a clear ‘axis switching’ takes place for the time-averaged cross-section of the jet that does not occur otherwise for a non-resonant condition.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.Experimental facility. (a) Setup with marked components. 1: nozzle; 2: plate; 3–5: mounting posts; 6, 7: breadboards; 8, 9: supports; 10: focused schlieren apparatus. (b) Schematic of setup with coordinates. (c) Extender bars added to a plate. (d) Setup to explore feedback path.

Figure 1

Figure 2.SPL spectra for plate $L20$ ($L=20.32~\text{cm}$) at four jet Mach numbers ($\mathit{Ma}_{j}$): (a) for different rigidity of plate mounting structure, (b) for plates of different material. Pairs of traces are staggered successively by 15 dB, ordinate pertains to the pair at the bottom.

Figure 2

Figure 3.SPL spectra for varying $z$-location (in cm) of plate $L20$;$x_{TE}=21.6$, $\mathit{Ma}_{j}=0.96$.

Figure 3

Figure 4.Overall sound pressure level for varying $z$-location of different plates; $x_{TE}=21.6$, $\mathit{Ma}_{j}=0.96$.

Figure 4

Figure 5.Schlieren images of flow field for varying $z$-location of plate $L20$; $x_{TE}=21.6$, $\mathit{Ma}_{j}=0.96$. (a) $z=-1.27$, (b) $z=-2.54$, (c) $z=-3.43$ and (d) $z=-5.59$.

Figure 5

Figure 6.Schlieren images of flow field for plate $L30$ at four $\mathit{Ma}_{j}$; $x_{TE}=21.6$, $z=-3.81$. (a) $\mathit{Ma}_{j}=0.76$, (b) $\mathit{Ma}_{j}=0.86$, (c) $\mathit{Ma}_{j}=0.99$ and (d) $\mathit{Ma}_{j}=1.06$.

Figure 6

Figure 7.SPL spectra for plate $L30$ with $x_{TE}=21.6$ and $z=-3.89$; $\mathit{Ma}_{j}=0.96$. Data are for all four polar locations, as indicated; successive curves are staggered by 10 dB for easy identification.

Figure 7

Figure 8.SPL spectra for plate $L30$ with varying $x_{TE}$; $\mathit{Ma}_{j}=0.96$. Plate $z$-location varied approximately as $z=1.37+0.12x_{TE}$. Ordinate pertains to the trace at the bottom, others staggered successively by 10 dB. Successive traces are for 1.27 cm increment in $x_{TE}$.

Figure 8

Figure 9.SPL spectra for fixed TE location of plate ($x_{TE}=21.6$ and $z=-3.94$) but varying $L$ (hence varying LE location, $x_{LE}$); $\mathit{Ma}_{j}=0.96$. Traces are staggered and successive traces are for 1.27 cm increment in $L$.

Figure 9

Figure 10.SPL spectra for fixed LE location of plate ($x_{LE}=0$, $z=-4.57$) but varying $L$ (hence varying $x_{TE}$); $\mathit{Ma}_{j}=0.96$. Traces are staggered and successive traces are for 1.27 cm increment in $L$.

Figure 10

Figure 11.SPL spectra for varying $\mathit{Ma}_{j}$ with plate $L30$; $x_{TE}=21.6$,$z=-3.81$. Traces are staggered in the same manner as in previous figures.

Figure 11

Figure 12.Amplitudes of the three highest peaks in the spectra of figure 9; varying $L$ with fixed $x_{TE}=21.6$, $z=-3.94$; $\mathit{Ma}_{j}=0.96$.

Figure 12

Figure 13.Frequencies of the three highest peaks in the spectra of figure 9. Varying $L$ with fixed $x_{TE}=21.6$, $z=-3.94$; $\mathit{Ma}_{j}=0.96$. f1, f2 and f3 denote three peaks in order of deceasing amplitude. Lines for equation (3.1) (see text).

Figure 13

Figure 14.Frequencies of the three highest peaks in the spectra of figure 10; fixed LE of plate ($x_{LE}=0$ and $z=-4.57$) but varying $L$ (hence varying $x_{TE}$).

Figure 14

Figure 15.Frequencies of the three highest peaks in the spectra of figure 11; varying $\mathit{Ma}_{j}$ for plate $L30$, $x_{TE}=21.6$, $z=-3.81$.

Figure 15

Figure 16.Frequencies of the three highest peaks in the spectra of figure 8; varying $x_{TE}$ for plate $L30$.

Figure 16

Figure 17.Frequencies of the three highest peaks in the spectra for varying $z$ with plate $L20$; $x_{TE}=21.6$, $\mathit{Ma}_{j}=0.96$.

Figure 17

Figure 18.Schematics of flow and acoustic diffraction. (a) Likely distribution of vortices in the flow, (b) possible acoustic waves and diffraction from the LE.

Figure 18

Figure 19.Effect of LE modification; plate $L30$, $x_{TE}=21.6$, $\mathit{Ma}_{j}=0.96$. (a) Effect of placing sound absorbing material near the LE (figure 1d), $z=-3.89$; (b) effect of closing the gap between the LE and the underside of the nozzle, $z=-3.56$.

Figure 19

Figure 20.Focused schlieren images near the TE of plate $L30$; $\mathit{Ma}_{j}=0.96$. Plate location ($x_{TE}=21.6$, $z=-3.81$) yielded resonant tone at 1375 Hz. Unsteady flow pattern at three phases within a tone period: (a) ${\it\varphi}=0^{\circ }$, (b) ${\it\varphi}=120^{\circ }$ and (c) ${\it\varphi}=240^{\circ }$ (arbitrary reference for phase ${\it\varphi}$).

Figure 20

Figure 21.Streamwise variation of phase and amplitude of the tone fundamental; $L30$ plate at $x_{TE}=21.6$, $z=-3.81$ producing tone at 1375 Hz. Data for four transverse ($z$) locations ($y=0$). (a) Phase variation, (b) amplitude (r.m.s. of pressure fluctuation) variation. Data obtained by spectral analysis of signal from pressure transducer relative to microphone signal.

Figure 21

Figure 22.Phase and amplitude variation for the resonance case of figure 21 in the transverse ($z$) direction, downstream of the plate’s trailing edge ($x=22.9$, $y=0$).

Figure 22

Figure 23.Cross-sectional distribution of $\mathit{Ma}/\mathit{Ma}_{j}$ for plate $L30$ at $x=22.9$ for the resonant condition of figures 20–22. Time-averaged data shown in (a); (b–e) show phase-averaged data at four phases: (b) ${\it\varphi}=0^{\circ }$; (c) ${\it\varphi}=80^{\circ }$; (d) ${\it\varphi}=180^{\circ }$ (e) ${\it\varphi}=260^{\circ }$. Coordinates are in cm.

Figure 23

Figure 24.Time-averaged $\mathit{Ma}/\mathit{Ma}_{j}$ contours at $x=64.5$ for a resonant and a non-resonant condition with plate $L30$: (a) $x_{TE}=21.6$, $z=-3.81$, $\mathit{Ma}_{j}=0.96$ (resonance at 1375 Hz); (b) $x_{TE}=7.6$, $z=-6.35$, $\mathit{Ma}_{j}=0.96$ (plate drawn back, no resonance). Coordinates are in cm.