Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:13:51.101Z Has data issue: false hasContentIssue false

Pulsed-laser-deposited AlN films for high-temperature SiC MIS devices

Published online by Cambridge University Press:  13 June 2014

R. D. Vispute
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
A. Patel
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
K. Baynes
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
B. Ming
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
R. P. Sharma
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
T. Venkatesan
Affiliation:
CSR, Department of Physics, University of Maryland, College Park, MD 20742
C. J. Scozzie
Affiliation:
United States Army Research Laboratory, Adelphi, MD 20783
A. Lelis
Affiliation:
United States Army Research Laboratory, Adelphi, MD 20783
T. Zheleva
Affiliation:
United States Army Research Laboratory, Adelphi, MD 20783
K. A. Jones
Affiliation:
United States Army Research Laboratory, Adelphi, MD 20783

Abstract

We report on the fabrication of device-quality AlN heterostructures grown on SiC for high-temperature electronic devices. The AlN films were grown by pulsed laser deposition (PLD) at substrate temperatures ranging from 25 °C (room temperature) to 1000 °C. The as-grown films were investigated using x-ray diffraction, Rutherford backscattering specttroscopy, ion channeling, atomic force microscopy, and transmission electron microscopy. The AlN films grown above 700 °C were highly c-axis oriented with rocking curve FWHM of 5 to 6 arc-min. The ion channeling minimum yields near the surface region for the AlN films were ∼2 to 4%, indicating their high degree of crystallinity. TEM studies indicated that AlN films were epitaxial and single crystalline in nature with a large number of stacking faults as a results of lattice mismatch and growth induced defects. The surface roughness for the films was about 0.5 nm, which is close to the unit cell height of the AlN. Epitaxial TiN ohmic contacts were also developed on SiC, GaN, and AlN by in-situ PLD. Epitaxial TiN/AlN/SiC MIS capacitors with gate areas of 4 * 10−4 cm2 were fabricated, and high-temperature current-voltage (I-V) characteristics were studied up to 450 °C. We have measured leakage current densities of low 10−8 A/cm2 at room temperature, and have mid 10−3 A/cm2 at 450°C under a field of 2 MV/cm.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Laser induced plasma plume of III- nitrides and schematic of the PLD.

Figure 1

Figure 2.RBS and ion channeling spectra of PLD AlN dielectric film on 6H-SiC (0001).

Figure 2

Figure 3.AFM of PLD AlN thin film deposited on SiC.

Figure 3

Figure 4.HRTEM of PLD AlN dielectric film on 6H-SiC(0001) substrate.

Figure 4

Figure 5.I-V characteristics and schematic of PLD TiN/AlN/SiC MIS capacitors