Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T09:25:50.678Z Has data issue: false hasContentIssue false

Moisture transfer by turbulent natural convection

Published online by Cambridge University Press:  15 July 2019

Lu Zhang
Affiliation:
Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, ChinaCenter for Complex Flows and Soft Matter Research and Department of Mechanics and Aerospace Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
Kai Leong Chong
Affiliation:
Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, China
Ke-Qing Xia*
Affiliation:
Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, ChinaCenter for Complex Flows and Soft Matter Research and Department of Mechanics and Aerospace Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
*
†Email address for correspondence: xiakq@sustech.edu.cn

Abstract

We present an experimental and numerical study of natural convection with moist air as convecting fluid. By simplifying the system as two-component convection, an experimental method is proposed for indirectly measuring the moisture transfer rates in buoyancy-driven flows. We verify the results using direct numerical simulations. It is found that the non-dimensionalized transfer rates for both sensible heat ($Nu_{T}$) and water vapour ($Nu_{e}$) are essentially determined by a generalized Grashof number $Gr$ (the ratio of combined buoyancy generated by the imposed temperature and vapour pressure gradients to viscous force), and are only weakly dependent on the buoyancy ratio $\unicode[STIX]{x1D6EC}$ (the ratio of buoyancy induced by temperature variation to that due to vapour pressure variation). Moreover, we show that the full set of control parameters $\{Gr,\unicode[STIX]{x1D6EC},Pr,Sc\}$ is more suitable than other choices for characterizing the two-component system under investigation. As a special case, the Schmidt number dependence for passive scalar transport rates in buoyancy-driven flows is also deduced.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Schematic of the experimental set-up. Arrows indicate the direction of heat flux. Open arrows denote the LHF and the filled arrows represent the SHF.

Figure 1

Figure 2.(a) Total heat flux $\unicode[STIX]{x1D6F7}_{q}$ as a function of the temperature difference $\unicode[STIX]{x1D6E5}_{T}$ across the two liquid–gas interfaces, and for various values of the bulk temperature $T_{bulk}$ which is measured at the cell centre. (b) The ratio of the LHF to the total heat flux $\unicode[STIX]{x1D6F7}_{L}/\unicode[STIX]{x1D6F7}_{q}$.

Figure 2

Figure 3.Nusselt numbers $Nu_{e}$ and $Nu_{T}$ as functions of the Grashof number $Gr$. Filled squares: experimentally measured $Nu_{e}$; open squares: $Nu_{e}$ from DNS; solid line: $0.143Gr^{0.283}$, which is a power-law fit to $Nu_{e}$ from DNS; open triangles: $Nu_{T}$ from DNS; dashed line: $0.152Gr^{0.283}$, which is a power-law fit to $Nu_{T}$ from DNS. The colour bar shows the inverse buoyancy ratio. The upper inset shows a magnified view containing the experimental data. Lower inset: squares, correction coefficient (4.2) used for correcting the experimental data; circles, correction coefficient obtained from DNS.

Figure 3

Table 1.Simulation parameters and time-averaged Nusselt numbers for the temperature $Nu_{T}$ and water vapour $Nu_{e}$. The averaging time $t_{avg}$ is given in the last column.

Figure 4

Table 2.Simulation parameters and time-averaged $Nu_{T}$ and $Nu_{e}$ at both plates when condensation on the sidewall is considered. The correction coefficient $\unicode[STIX]{x1D702}_{DNS}$ is defined as $Nu_{e,top}/Nu_{e,bot}$.

Figure 5

Figure 4.Snapshots of temperature (a) and water vapour content (b) isosurfaces taken simultaneously from DNS data at $Gr=2.9\times 10^{7},\unicode[STIX]{x1D6EC}=1,Pr=0.7$ and $Sc=0.6$.

Figure 6

Figure 5.Contour plots of the temperature field (dashed curve) and vapour field (solid curve). (a) Snapshot of the vertical cross-section. (b) Snapshot of the horizontal cross-section. Colour map corresponding to the temperature fields.

Figure 7

Figure 6.(a) Parameter space of the study in the $\{1/\unicode[STIX]{x1D6EC},Gr\}$ plane; squares: experimental data; circles: DNS data. (b) Experimentally measured $Nu_{e}$ as a function of $Ra_{T}$ and $Ra_{e}$; open squares: projection of the data to the parameter space in the $Ra_{e},Ra_{T}$ plane. The colours in (a,b) correspond to different bulk temperatures and the colour code is the same as in figure 2(a). (c) Values of $Nu_{e}$ from DNS.

Figure 8

Figure 7.Compensated plot of $Nu_{e}$ and $Nu_{T}$. Blue circles: $Nu_{e}Gr^{-0.283}$; red triangles: $Nu_{T}Gr^{-0.283}$; solid line: $0.138Gr^{0.283}[(\unicode[STIX]{x1D6EC}Pr+Sc)/(\unicode[STIX]{x1D6EC}+1)]^{-0.089}$; dashed line: $0.147Gr^{0.283}[(\unicode[STIX]{x1D6EC}Pr+Sc)/(\unicode[STIX]{x1D6EC}+1)]^{-0.087}$. The data scatter for the same $\unicode[STIX]{x1D6EC}$ is about $2\,\%$ and is the uncertainty of the DNS data.

Figure 9

Figure 8.Nusselt number $Nu_{e}$ as a function of $Gr$. Filled squares: experimentally measured $Nu_{e}$; open squares: $Nu_{e}$ from DNS; solid line: $0.143Gr^{0.283}$; dashed line: GL prediction for $1/\unicode[STIX]{x1D6EC}=1$; dotted line: GL prediction for $1/\unicode[STIX]{x1D6EC}=0$; colour bar: inverse density ratio.