Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T00:12:51.101Z Has data issue: false hasContentIssue false

Principle of fundamental resonance in hypersonic boundary layers: an asymptotic viewpoint

Published online by Cambridge University Press:  08 January 2024

Runjie Song
Affiliation:
State Key laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
Ming Dong*
Affiliation:
State Key laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
Lei Zhao*
Affiliation:
Department of Mechanics, Tianjin University, Tianjin 300072, PR China
*
†Email addresses for correspondence: dongming@imech.ac.cn, lei_zhao@tju.edu.cn
†Email addresses for correspondence: dongming@imech.ac.cn, lei_zhao@tju.edu.cn

Abstract

The fundamental resonance (FR) in the nonlinear phase of the boundary-layer transition to turbulence appears when a dominant planar instability mode reaches a finite amplitude and the low-amplitude oblique travelling modes with the same frequency as the dominant mode, together with the stationary streak modes, undergo the strongest amplification among all the Fourier components. This regime may be the most efficient means to trigger the natural transition in hypersonic boundary layers. In this paper, we aim to reveal the intrinsic mechanism of the FR in the weakly nonlinear framework based on the large-Reynolds-number asymptotic technique. It is found that the FR is, in principle, a triad resonance among a dominant planar fundamental mode, a streak mode and an oblique mode. In the major part of the boundary layer, the nonlinear interaction of the fundamental mode and the streak mode seeds the growth of the oblique mode, whereas the interaction of the oblique mode and the fundamental mode drives the roll components (transverse and lateral velocity) of the streak mode, which leads to a stronger amplification of the streamwise component of the streak mode due to the lift-up mechanism. This asymptotic analysis clearly shows that the dimensionless growth rates of the streak and oblique modes are the same order of magnitude as the dimensionless amplitude of the fundamental mode $(\bar {\epsilon }_{10})$, and the amplitude of the streak mode is $O(\bar {\epsilon }_{10}^{-1})$ greater than that of the oblique mode. The main-layer solution of the streamwise velocity, spanwise velocity and temperature of both the streak and the oblique modes become singular as the wall is approached, and so a viscous wall layer appears underneath. The wall layer produces an outflux velocity to the main-layer solution, inclusion of which leads to an improved asymptotic theory whose accuracy is confirmed by comparing with the calculations of the nonlinear parabolised stability equations (NPSEs) at moderate Reynolds numbers and the secondary instability analysis (SIA) at sufficiently high Reynolds numbers.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Characteristic parameters in the frequency-spanwise-wavenumber space: (a) oblique-mode breakdown regime; (b) subharmonic resonance regime; (c) fundamental resonance regime. Here, $\omega _0$ and $\beta _0$ denote the fundamental frequency and spanwise wavenumber, respectively. This sketch is a modified version of figure 10 of Hader & Fasel (2019).

Figure 1

Figure 2.Sketch of the physical model.

Figure 2

Table 1.Parameters characterising the flow condition.

Figure 3

Figure 3.(a) Streamwise velocity and (b) temperature of the compressible Blasius solution at $x=0$ forCases A and B. The red and black horizontal lines denote the nominal boundary-layer thicknesses for the two cases, respectively.

Figure 4

Figure 4.Dependence on the frequency $\omega$ of the growth rate $-\alpha _i$ of 2-D modes for (a) Case A and(b) Case B.

Figure 5

Figure 5.Streamwise evolution of the $N$ factors of 2-D second modes for (a) Case A and (b) Case B at $R=2 \times 10^{3}$.

Figure 6

Table 2.Parameters for case studies in § 3.3.

Figure 7

Figure 6.Contours of the velocity field obtained by the NPSE for Case A: (a,b) instantaneous velocity $u$ in the $x$–$z$ planes at $y=5\,\% \delta _{99}$ and $y=40\,\% \delta _{99}$, respectively; (c,d) time-averaged velocity in the $x$–$z$ planes at $y=5\,\% \delta _{99}$ and $y=40\,\% \delta _{99}$, respectively; (e) time-averaged velocity in the $y$–$z$ plane at $x=1360$, where the arrayed curves show the streamlines.

Figure 8

Figure 7.Streamwise evolution of the NPSE results for Case A: (a) amplitude of each Fourier component $\hat u_{max}^{(m,n)}$; (b) perturbation energy of each Fourier component $E_{mn}$; (c) energy growth rate of each Fourier component $\sigma _E$; (d) coefficient of surface friction, where the $C_f$ curve for turbulence is given by the empirical formula of White (2006, p. 553).

Figure 9

Figure 8.Comparison of the growth rate $\sigma _E$ obtained by the NPSE calculation with the SIA prediction $\tilde {\sigma }$.

Figure 10

Figure 9.Comparison of the perturbation profiles for $(0,1)$ and $(1,1)$ obtained by the SIA and NPSE approaches for Case A at $x=1000$. The profiles are normalised by the maximum of ${\hat v}_{01}$.

Figure 11

Figure 10.Sketch of the principle of the FR.

Figure 12

Figure 11.Asymptotic structures of (a) $\hat {\phi }_{10}$, (b) $\hat {\phi }_{01}$ and (c) $\hat {\phi }_{1\pm 1}$, where $\epsilon \equiv (\bar {\epsilon }_{10} R)^{-1/3}$.

Figure 13

Table 3.Parameters for case studies in § 5.

Figure 14

Figure 12.Evolution of the amplitude of modes $(1,0)$ and $(0,0)$ obtained by NPSE: (a,b) results for Cases A1–A5; (c,d) results for Cases B1–B5. Panels (b,d) are the zoom-in plots of panels (a,c), respectively.

Figure 15

Figure 13.Comparison of the base flow $\varPhi _{B}$ and the time- and spanwise-averaged mean flow $\bar \varPhi$ for Case A5 and Case B5 at $x=1000$: (a) streamwise velocity; (b) temperature.

Figure 16

Figure 14.Comparison of (a) the wavenumber $\alpha _r$ and (b) the growth rate $-\alpha _i$ of mode $(1,0)$ obtained by the NPSE calculations and the Rayleigh solutions for Case A5 and Case B5.

Figure 17

Figure 15.Comparison of the perturbation profiles of the fundamental mode $(1,0)$ obtained by the NPSE calculation and the Rayleigh solutions for (a,b) Case A5 and (c,d) Case B5 at $x=1000$.

Figure 18

Figure 16.Evolution of the (a,c) amplitude and (b,d) growth rate of $(1,1)$ and $(0,1)$ components: (a,b) Cases A1–A5; (c,d) Cases B1–B5.

Figure 19

Figure 17.Dependence on $x$ of the normalised growth rate obtained by the NPSE calculation, the asymptotic prediction and the improved asymptotic prediction for (a) Case A5 and (b) Case B5.

Figure 20

Figure 18.Dependence on $R$ of the normalised growth rate $\bar \sigma$ obtained by the NPSE calculation, the asymptotic prediction and the improved asymptotic prediction at $x=1000$: (a) Cases A1–A5; (b) Cases B1–B5.

Figure 21

Figure 19.Perturbation profiles of $(0,1)$ and $(1,1)$ at $x=1000$ for Case A. Solid lines, NPSE results; dashed lines, asymptotic predictions; symbols, improved asymptotic predictions. The profiles are normalised by the maximum of $\mathrm {Re}(\hat {v}_{01})$.

Figure 22

Figure 20.Perturbation profiles of $(0,1)$ and $(1,1)$ at $x=1000$ for Case B. Solid lines, NPSE results; dashed lines, asymptotic predictions; symbols, improved asymptotic predictions. The profiles are normalised by the maximum of $\mathrm {Re}(\hat {v}_{01})$.

Figure 23

Table 4.Parameters for the FR calculations at higher $R$ values.

Figure 24

Figure 21.Perturbation profiles of the fundamental mode $(1,0)$ for the cases listed in table 4: (a,c) streamwise perturbation velocity; (b,d) perturbation temperature. (a,b) Cases A6–A10; (c,d) Cases B6–B10.

Figure 25

Figure 22.Dependence on $R$ of the normalised growth rate $\bar \sigma$ obtained by the SIA approach, the asymptotic theory and the improved asymptotic theory: (a) Cases A6–A10; (b) Cases B6–B10.

Figure 26

Figure 23.Dependence on ${\bar {\epsilon }}_{10}$ of the normalised growth rate $\bar \sigma$ obtained by the SIA and the improved asymptotic prediction: (a) Cases A6 and A10; (b) Cases B6 and B10.

Figure 27

Figure 24.Comparison of the perturbation profiles for streak mode $(0,1)$ obtained by SIA (for Cases A6–A10) and asymptotic theory. The eigenfunctions are normalised by the maximum of $\mathrm {Re}({\hat v}_{01})$.

Figure 28

Figure 25.Comparison of the perturbation profiles for streak mode $(0,1)$ obtained by SIA (for Cases B6–B10) and asymptotic theory. The eigenfunctions are normalised by the maximum of $\mathrm {Re}({\hat v}_{01})$.