Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T05:43:43.179Z Has data issue: false hasContentIssue false

Post-shock turbulence recovery in oblique-shock/turbulent boundary layer interaction flows

Published online by Cambridge University Press:  24 April 2023

Ming Yu
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR ChinaKey Laboratory of Applied Mechanics, Ministry of Education, Institute of Fluid Mechanics, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, PR China
SiWei Dong
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
PengXin Liu
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
ZhiGong Tang
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
XianXu Yuan*
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
ChunXiao Xu
Affiliation:
Key Laboratory of Applied Mechanics, Ministry of Education, Institute of Fluid Mechanics, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, PR China
*
†Email addresses for correspondence: yuanxianxu@cardc.cn, xucx@tsinghua.edu.cn

Abstract

The oblique shock impinging on the supersonic turbulent boundary layer leads to a mixing layer and the emergence of large-scale coherent structures within the interaction zone which leave significant velocity defect and turbulence amplification downstream. In the present study, we investigate the turbulence recovery in the post-shock region by exploiting direct numerical simulation data of the oblique-shock/turbulent boundary layer interaction flow at the incoming Mach number of $2.28$ and the shock angle of $33.2^\circ$, with special attention paid to the contribution of the mixing layer and large-scale structures to flow dynamics. For that purpose, we propose to split the mean velocity, Reynolds stresses and spanwise spectra into a canonical portion that is constructed according to the statistics of canonical turbulent boundary layers, and a mixing-layer-induced portion. We found that the hidden mixing layer grows with the boundary layer thickness and that the induced mean shear and Reynolds stresses decay at different rates. The mean velocity recovers to the canonical profiles at a distance of 13 boundary layer thicknesses downstream where the mixing-layer-induced mean shear ceases to have strong impacts. The recovery of Reynolds stresses requires 10 boundary layer thicknesses in the near-wall region but a much longer streamwise extent in the outer region due to the slow decay of large-scale motions. These large-scale motions superpose on the near-wall turbulence, intensifying the turbulent fluctuations, yet having a trivial impact on the skin friction, for the contribution of the mixing-layer-induced mean shear and Reynolds shear stress are balanced by the advection term. We further establish a simple physical model capable of approximately predicting the streamwise evolution of mixing-layer-induced mean shear and turbulent kinetic energy. This model suggests that the complete recovery of turbulence in the outer region requires a streamwise extent of approximately 50 boundary layer thicknesses.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of the computational domain.

Figure 1

Table 1.Statistics at the reference plane $x_r=15.0 \delta _{in}$. Here, the skin friction coefficient is defined as $C_f = 2 \tau _w / (\rho _\infty U^2_\infty )$, $\delta ^*_r$ and $\theta _r$ are the displacement and momentum thicknesses, $Re_{\theta r} = \rho _\infty U_\infty \theta _r / \mu _\infty$, friction Reynolds number $Re_{\tau r} = \rho _w u_\tau \theta _r / \mu _w$ and shape factor $H_r = \delta ^*_r / \theta _r$.

Figure 2

Figure 2.Reynolds stress distribution, (a) $R_{uu}$, (b) $R_{vv}$, (c) $R_{ww}$, (d) $R_{uv}$, flooded: present results, lines: reference data from Bernardini et al. (2016).

Figure 3

Figure 3.Instantaneous fields, isosurface of (a) velocity fluctuation $u''/U_\infty =-0.1$, (b) the second invariant of velocity gradient $Q=10.0$, coloured by the wall-normal coordinate $y$. Transparent isosurfaces: incident and reflected shocks, vertical slices: numerical Schlieren $\exp (-|\boldsymbol {\nabla } \rho |/\rho )$.

Figure 4

Figure 4.Streamwise stations in the subsequent analysis. Contours on the cross-stream slices: velocity fluctuation $u''/U_\infty$, on the vertical slice: numerical Schlieren $\exp (-|\boldsymbol {\nabla } \rho |/\rho )$.

Figure 5

Table 2.Streamwise stations and line legends in the subsequent analysis.

Figure 6

Figure 5.Mean velocity profiles, (a) normalized by outer scales, (b) van Driest transformed, normalized by viscous scales. Line legends refer to table 2, symbols: reference data reported by Pirozzoli & Bernardini (2011b) at $M_\infty =2$ and $Re_\tau =200$.

Figure 7

Figure 6.Wall-normal distributions of Reynolds stresses, normalized by the wall shear stress $\tau _w$, (a) $R^+_{uu}$, (b) $R^+_{vv}$, (c) $R^+_{ww}$ and (d) $-R^+_{uv}$. Symbols: reference data at $Re_\tau \approx 200$ and $M_\infty =2$ (Pirozzoli & Bernardini 2011b). Line legends refer to table 2.

Figure 8

Figure 7.Mean velocity distributions, (a,b) original $\tilde u$ and constructed $\tilde u_c$, (a) van Driest transformation normalized by viscous scales, (b) normalized by outer scales, lines with symbols: $\tilde u$, lines: $\tilde u_c$. (c) Mixing-layer-induced portion $\tilde u_m$. (d) Open symbols: gradient of $\tilde u_m$, lines: curve fitting with cubic polynomials within $y/\delta = 0.3 \sim 0.9$, solid symbols: the maxima of the fitting curve. Line legends refer to table 2.

Figure 9

Figure 8.Distributions of Reynolds shear stress in the wall-normal direction, (a) original $\bar \tau _t$, (b) constructed canonical portion $\bar \tau _{t,c}$, (c) mixing-layer-induced portion $\bar \tau _{t,m}$. Line legends refer to table 2.

Figure 10

Figure 9.Distribution of the pre-multiplied integrands in formulas (4.4)- (4.9a,b), normalized by viscous scales. (a–c) Viscous terms, (a) $C_{V,int}$, (b) $C_{Vc,int}$, (c) $C_{Vm,int}$. (d–f) Reynolds shear stress terms, (d) $C_{T,int}$, (e) $C_{Tc,int}$, (f) $C_{Tm,int}$. (g) Advection term $C_{G,int}$. Line legends refer to table 2.

Figure 11

Figure 10.Skin friction decomposition by the RD formula in (4.4)–(4.9a,b), grey-shaded region: interaction zone, with the extension of $1.2 \delta _r$ in both directions.

Figure 12

Figure 11.Evolution of boundary layer thicknesses, (a) nominal boundary layer thickness $\delta / \delta _r$, (b) red dashed line: displacement thickness $\delta ^*/ \delta _r$, blue dash-dotted line: kinetic energy thickness $\delta ^{**} /\delta _r$, black solid line: $(\delta ^*+\delta ^{**})/\delta _r$.

Figure 13

Figure 12.Pre-multiplied spanwise spectra for density-weighted velocity fluctuations at $x_3$, (a–c) canonical portion $k_z E^+_{u_i u_i,c}$, normalized by viscous scales, (d–f) the original spectra, $k_z E_{u_i u_i}$, (g–i) the mixing-layer-induced portion, $k_z E_{u_i u_i,m}$, normalized by outer scales, (a,d,g) streamwise component $k_z E_{uu}$, (b,e,h) wall-normal component $k_z E_{vv}$, (c,f,i) spanwise component $k_z E_{ww}$.

Figure 14

Figure 13.Mixing-layer-induced Reynolds stress components (a,c,e,g) and their anisotropy (b,d,f,h), (a,b) $R_{uu,m}$, (c,d) $R_{vv,m}$, (e,f) $R_{ww,m}$, (g,h) $-R_{uv,m}$, with $K_\infty$ representing the MKE of the incoming flow and $K_m$ the TKE. Line legends refer to table 2.

Figure 15

Figure 14.(a) Convective Mach number $M_c$. Ratios between the maximal values, (b) $R_{vv,m}/R_{uu,m}$, (c) $-R_{uv,m}/R_{uu,m}$.

Figure 16

Figure 15.Budget of TKE transport, normalized by viscous scales, (a) advection term $C_K$, (b) production term $P_K$, (c) diffusion term $T_K$, (d) dissipation term $D_K$. Line legends refer to table 2.

Figure 17

Figure 16.Contribution of canonical and mixing-layer-related portions to the turbulent production at (a) $x_1$, (b) $x_2$, (c) $x_3$ and (d) $x_4$.

Figure 18

Figure 17.Pressure-strain terms of the Reynolds stress components, normalized by viscous scales, (a) $\varPi ^+_{11}$, (b) $\varPi ^+_{22}$, (c) $\varPi ^+_{33}$, (d) variation of $\varPi ^+_{22}$ and $\varPi ^+_{33}$ against $\varPi ^+_{11}$ in $y^+>40$ and $y/\delta <1.3$. Line legends refer to table 2.

Figure 19

Figure 18.The distribution of (a) $U_m$ and (b) $K_m$, line: model, symbols: DNS.

Figure 20

Figure 19.Distribution of the anisotropy tensor of Reynolds stress between $y/\delta = (0.3\sim 1.0)$, plotted in (a) $\xi$–$\eta$ and (b) $III$–$II$ planes.