Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T18:28:07.215Z Has data issue: false hasContentIssue false

Raman Determination of the Phonon Deformation Potentials in α-GaN

Published online by Cambridge University Press:  13 June 2014

M. A. Renucci
Affiliation:
Laboratoire de Physique des Solides de Toulouse, Universite Paul Sabatier
Roger-Louis Aulombard
Affiliation:
Groupe d’Etude des Semiconducteurs, GES-CNRS

Abstract

Raman spectroscopy is used to study the effect of the built-in biaxial stress on the E2 and A1 (LO) q = 0 phonon modes of wurtzite GaN layers deposited by metal organic vapor phase epitaxy on (0001) sapphire substrate. By means of phonon frequency shifts, the biaxial pressure coefficients of the mode frequencies are determined and used to calculate the corresponding deformation potentials. Stress calibration has been performed using reflectance data.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Typical GaN reflectivity spectra taken at 2K (full line) and 77K (dashed line). The 77K spectrum is blue-shifted by 4 meV to match the energy of structures A. Except for a weak broadening of the structures with increasing temperature, due to thermal increasing of collisions, the constant splittings we observe between the A, B and C lines is experimental evidence of a constant biaxial strain for temperatures ranging between 2K and 77K.

Figure 1

Table ILayer characteristics and corresponding built-in stress estimated from 2K reflectance experiments.

Figure 2

Figure 2.Unanalyzed Raman Spectra recorded at 77K for different GaN layers at λL = 488 nm in the E2 frequency range. The asterisk marks one of the sapphire lines at 578cm−1.

Figure 3

Figure 3.Least-squares fit of the mode wave numbers vs. the internal stress estimated at 77K for the E2 and A1 (LO) modes.

Figure 4

Table IIPhonon deformation potentials of GaN at liquid nitrogen temperature in cm−1/unit strain.