Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T10:13:22.991Z Has data issue: false hasContentIssue false

Numerical investigation of mixed-phase turbulence induced by a plunging jet

Published online by Cambridge University Press:  11 January 2024

Rong Li
Affiliation:
The State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Sciences, University of Chinese Academy of Sciences, Beijing 100049, PR China
Zixuan Yang*
Affiliation:
The State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Sciences, University of Chinese Academy of Sciences, Beijing 100049, PR China
Wei Zhang
Affiliation:
Science and Technology on Water Jet Propulsion Laboratory, Marine Design and Research Institute of China, Shanghai 200011, PR China
*
†Email address for correspondence: yangzx@imech.ac.cn

Abstract

In nature and engineering applications, water jet plunging acts as a key process causing interface breaking and generating mixed-phase turbulence. In this paper, high-resolution numerical simulations of the plunging of a water jet into a quiescent pool were performed to investigate the statistical properties of mixed-phase turbulence, with a special focus on the closure problem of the Reynolds-averaged equation. We conducted phase-resolved simulations, with the air–water interface captured using a coupled level-set and volume-of-fluid method. Various cases were performed to analyse the effects of the Froude number and Reynolds number. The simulation results showed that the turbulence statistics are insensitive to the Reynolds number under investigation, while the Froude number influences the flow properties significantly. To investigate the closure problem of the mean momentum equation, the turbulent kinetic energy (TKE) and turbulent mass flux (TMF) and their transport equations were analysed further. It was discovered that the balance relationship of the TKE budget terms remained similar to many single-phase turbulent flows. The TMF is an additional unclosed term in mixed-phase turbulence over the single-phase turbulence. Our simulation results showed that the production term in its transport equation was highly correlated to TKE. Based on this finding, a closure model for the production term of TMF was further proposed.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Definition sketch of the computational model.

Figure 1

Table 1.Parameters in the simulations of the plunging jet.

Figure 2

Figure 2.Simulation result of instantaneous air–water interface visualized using the iso-surface $\phi = 0$. The result for case 6 is shown.

Figure 3

Figure 3.Mixed-phase region in case 6: (a) contour of the mean volume of the fluid $0.05 < \bar {\psi } < 0.95$ at the mid-span; (b) transverse cuts of the mixed-phase region in different streamwise positions. The dash-dotted line in (a) and iso-surface in (b) represent the mean free surface with $\bar {\psi } = 0.5$.

Figure 4

Figure 4.Vertical profiles of (a) the mean volume of the fluid and (b) the mean streamwise velocity at the mid-span and different streamwise locations for different Reynolds numbers. Solid line indicates ${Re} = 1.6 \times 10^5$, dashed line indicates ${Re} = 1.6 \times 10^4$, dotted line indicates ${Re} = 1.6 \times 10^3$; circles and triangles represent the numerical and experimental data, respectively, of the same case with ${Re} = 1.6 \times 10^5$ in Deshpande et al. (2012). Dash-dotted lines represent the edge of the mixed-phase region. The results for case 6 are shown.

Figure 5

Figure 5.Bubble-size density spectra for cases at different Reynolds number. The Froude number is ${Fr} = 6.4$.

Figure 6

Figure 6.Streamwise variation of the mixed-phase region area for cases at different Froude numbers.

Figure 7

Figure 7.Maximum mixed-phase region area at different Froude numbers, and the linear fitting line.

Figure 8

Figure 8.Contours of time-averaged velocities (a) $\bar {u}$ and (b) $\bar {v}$ at the mid-span. Dotted lines represent the edges of the mixed-phase region. Here, ${Re} = 1600$ and ${Fr} = 6.4$.

Figure 9

Figure 9.Streamwise variation of the mean velocities averaged in the mixed-phase region for different Froude numbers: (a) $\langle \bar {u}^R \rangle _{yz}$, (b) $\langle \bar {v}^R \rangle _{yz}$.

Figure 10

Figure 10.Streamwise variation of the budget term of the mean momentum equation averaged in the mixed-phase region. The results for ${Re} = 1600$ and ${Fr} = 6.4$ (case 6) are shown.

Figure 11

Figure 11.Contours of TKE at the mid-span. Dotted lines represent the edges of the mixed-phase region. The results for ${Re} = 1600$ and ${Fr} = 6.4$ (case 6) are shown.

Figure 12

Figure 12.Streamwise variation of TKE averaged in the mixed-phase region for various Froude numbers.

Figure 13

Figure 13.Variation of the magnitudes of the primary peak (red circle symbols) and secondary peak (blue square symbols) of TKE with respect to the Froude number.

Figure 14

Figure 14.Streamwise variation of the budget terms in the transport equation of TKE averaged in the mixed-phase region. The results for ${Re} = 1600$ and ${Fr} = 6.4$ (case 6) are shown.

Figure 15

Figure 15.Contours of (a) streamwise TMF component $\overline {\rho u^\prime }$ and (b) vertical TMF component $\overline {\rho v^\prime }$ at the mid-span. The upper and lower dotted lines represent the edges of the mixed-phase region. The dash-dotted line in (a) represents the mean location of the free surface. The results for ${Re} = 1600$ and ${Fr} = 6.4$ (case 6) are shown.

Figure 16

Figure 16.Streamwise variation of TMF $\langle \overline {\rho u_i^\prime }^R\rangle _{yz}$ averaged in the mixed-phase region for various Froude numbers: (a) streamwise component and (b) vertical component.

Figure 17

Figure 17.Streamwise variation of the budget terms in transport equation of (a) the streamwise component and (b) the vertical component of TMF averaged in the mixed-phase region. The results for ${Re} = 1600$ and ${Fr} = 6.4$ (case 6) are shown.

Figure 18

Figure 18.Streamwise variation of the production term corresponding to the density gradient $PT_i^{(2)}$ averaged in the mixed-phase region for various Froude numbers: (a) streamwise component and (b) vertical component.

Figure 19

Table 2.Model coefficients in (3.25) and conditioned correlation coefficients between the two sides of (3.25) in the mixed-phase region. The two columns of $C_i$ and $R_i$ correspond to the streamwise and vertical components, respectively.

Figure 20

Table 3.Correlation coefficients between the two sides of (3.26) in the mixed-phase region. The two columns of $R_i$ indicate the streamwise and vertical components, respectively.

Figure 21

Table 4.Information about grids used for resolution test.

Figure 22

Figure 19.Streamwise variation of (a) area of mixed-phase region $S^R$, (b) mean streamwise velocity $\langle \bar {u}^R \rangle _{yz}$, (c) mean vertical velocity $\langle \bar {v}^R \rangle _{yz}$, (d) TKE $\langle \langle k^R \rangle _{yz}$, (e) streamwise TMF $\langle \overline {\rho u^\prime }^R \rangle _{yz}$, and (f) vertical TMF $\langle \overline {\rho v^\prime }^R \rangle _{yz}$, obtained from different grids. Information about the different grids is given in table 4.

Supplementary material: File

Li et al. supplementary movie 1

Plunging jet at Fr = 3.2 (case 3).
Download Li et al. supplementary movie 1(File)
File 9.2 MB
Supplementary material: File

Li et al. supplementary movie 2

Plunging jet at Fr = 6.4 (case 6).
Download Li et al. supplementary movie 2(File)
File 9.6 MB
Supplementary material: File

Li et al. supplementary movie 3

Plunging jet at Fr = 9.6 (case 9).
Download Li et al. supplementary movie 3(File)
File 9.6 MB