Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T02:31:43.093Z Has data issue: false hasContentIssue false

Layering and vertical transport in sheared double-diffusive convection in the diffusive regime

Published online by Cambridge University Press:  23 December 2021

Yantao Yang*
Affiliation:
SKLTCS and Department of Mechanics and Engineering Science, BIC-ESAT, College of Engineering, and Institute of Ocean Research, Peking University, Beijing 100871, PR China
Roberto Verzicco
Affiliation:
Physics of Fluids Group, Department of Science and Technology, Mesa+ Institute, Max-Planck Center Twente for Complex Fluid Dynamics, and J. M. Burgers Center for Fluid Dynamics, University of Twente, Twente, 7500 AE Enschede, The NetherlandsDipartimento di Ingegneria Industriale, University of Rome ‘Tor Vergata’, Via del Politecnico 1, 00133 Rome, Italy
Detlef Lohse
Affiliation:
Physics of Fluids Group, Department of Science and Technology, Mesa+ Institute, Max-Planck Center Twente for Complex Fluid Dynamics, and J. M. Burgers Center for Fluid Dynamics, University of Twente, Twente, 7500 AE Enschede, The NetherlandsMax Planck Institute for Dynamics and Self-Organisation, 37077 Göttingen, Germany
C.P. Caulfield*
Affiliation:
BP Institute, University of Cambridge, Madingley Road, Cambridge CB3 0EZ, UKDepartment of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA, UK
*
†Email addresses for correspondence: yantao.yang@pku.edu.cn, cpc12@cam.ac.uk
†Email addresses for correspondence: yantao.yang@pku.edu.cn, cpc12@cam.ac.uk

Abstract

A sequence of two- and three-dimensional simulations are conducted for the double-diffusive convection (DDC) flows in the diffusive regime subjected to an imposed shear. For a wide range of control parameters, and for sufficiently strong perturbation of the conductive initial state, staircase-like structures spontaneously develop, with relatively well-mixed layers separated by sharp interfaces of enhanced scalar gradient. Such staircases appear to be robust even in the presence of strong shear over very long times, with early-time coarsening of the observed layers. For the same set of control parameters, different asymptotic layered states, with markedly different vertical scalar fluxes, can arise for different initial perturbation structures. The imposed shear significantly spatio-temporally modifies the vertical transport of the various scalars. The flux ratio $\gamma ^*$ (i.e. the ratio between the density fluxes due to the total salt flux and the total heat flux) is found, at steady state, to be essentially equal to the square root of the ratio of the salt diffusivity to the thermal diffusivity, consistent with the physical model proposed by Linden & Shirtcliffe (J. Fluid Mech., vol. 87, 1978, pp. 417–432) and the variational arguments presented by Stern (J. Fluid Mech., vol. 114, 1982, pp. 105–121) for unsheared double-diffusive convection.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Table 1.Parameters and numerical details of simulated cases. Columns from left to right: case number; Rayleigh numbers of temperature and salinity; aspect ratios in horizontal directions; the grid size of the base mesh; the refinement factors for the refined mesh; and the parameters $k$ and $\delta$ for the initial perturbations used in (2.7a,b) for cases 1–6. Case 7 (with the same bulk parameters as case 5) has initial condition given by (2.8a,b). For all cases, the density ratio is fixed at $\varLambda =2$ and the Richardson number at $Ri_b=1$.

Figure 1

Figure 1.Density fields at different stages of (a,c) case 1 with $Ra_\theta =10^5$ and (b,d) case 5 with $Ra_\theta =10^7$. Panels ($a$) and ($b$) show the flow fields at the early stage when the initial perturbations grow into layers of vortices. Panels ($c$) and ($d$) show those at the final stage with distinct layers separated by sharp interfaces with high density gradient. The 3D data are from the $y$–$z$ plane at the $x$ midpoint of the computational domain. In both cases, the emergence of the layers and subsequently their coarsening with time is clearly seen. All panels share the same colour map as shown at the left.

Figure 2

Figure 2.Density fields from the 3D simulation of case 2 (a,c) and the 2D simulation of case 3 (b,d). The two cases have the same $Ra=10^6$. Panels (a) and (b) are for time $t=100$ and panels (c) and (d) for $t=2500$. The 3D data are from the $y$–$z$ plane at the $x$ midpoint of the computational domain. All panels share the same colour map as shown at the left.

Figure 3

Figure 3.Time evolution of horizontally averaged scalar profiles. Panels (a)–(e) are for cases 1–3, 5 and 6, with parameters given in table 1. Columns from left to right show mean profiles of non-dimensional temperature, salinity and density, respectively. Different cases share the same colour map for each scalar field.

Figure 4

Figure 4.Time history of (a) the scaled global salt transfer rate ${\textit {Nu}}_s$, (b) the scaled global heat transfer rate ${\textit {Nu}}_\theta$, (c) the convective density flux $-\langle u_z\rho ' \rangle _a$, and (d,e) the Reynolds numbers $Re_y$ and $Re_z$, respectively, for case  5.

Figure 5

Figure 5.Time evolutions of the horizontally averaged profiles for case 5. Rows from top to bottom show mean profiles of scalar gradients $\langle \partial _z\zeta \rangle _h$, scalar convective fluxes $\langle u_z\zeta \rangle _h$ and turbulent diffusivity $\kappa ^T_\zeta = \langle u_z\zeta \rangle _h / \langle \partial _z\zeta \rangle _h$. Columns from left to right are for $\zeta =\theta$, $s$ and $\rho '$, respectively. Black arrows mark the time-averaged heights of identifiable interfaces.

Figure 6

Figure 6.Time-averaged profiles for (a–c) the three scalar fields, (d–f) their convective fluxes and (g) the total flux ratio $\gamma ^*$, as defined in (4.2). Time averaging is calculated from the data presented in figure 5 over the time interval $3000 \leq t \leq 6000$.

Figure 7

Figure 7.Time evolutions for profiles of (a) ${\textit {Ri}}_g$ (b) $Re_b$, and (c) $\varGamma$, respectively, for case 5 with $Ra_\theta =10^7$. Black arrows mark the heights of interfaces.

Figure 8

Figure 8.Joint relative probability for four pairs of flow quantities, including the vertical gradient of mean density $\langle -\partial _z \rho ' \rangle _h$, the mean convective flux of density $\langle u_z\rho ' \rangle _h$, $\varGamma =g\langle u_z\rho ' \rangle _h / \rho _0\langle \varepsilon \rangle _h$, ${\textit {Ri}}_g=N^2/S^2$ and $Re_b = \langle \varepsilon \rangle _h/\nu N^2$. Statistics are calculated from the data of figure 5 for $t>3000$ and $0.1< z/H<0.9$. The colour is shown on logarithmic scale.

Figure 9

Figure 9.Time average (over the interval $3000 < t < 6000$) of the mean convection flux $\langle u_z\rho ' \rangle _h$ conditioned on the mean density gradient $\langle -\partial _z \rho ' \rangle _h$.

Figure 10

Figure 10.Time evolutions of the horizontally averaged scalar profiles for case 7, starting from a single localised density inversion, with control parameters the same as case 5, as listed in table 1: (a) temperature, (b)  salinity and (c)  density.

Figure 11

Figure 11.Snapshots of density at four different time steps for case 7: (a) $t = 10\,000$, (b) $t = 12\,000$, (c) $t = 16\,500$ and (d) $t = 20\,000$.

Figure 12

Figure 12.Time history of (a) the scaled global salt transfer rate ${\textit {Nu}}_s$, (b) the scaled global heat transfer rates ${\textit {Nu}}_\theta$ and (c) the convective density flux $-\langle u_z\rho ' \rangle _a$ for case 7, as listed in table 1.

Yang et al. supplementary movie 1

Evolution of layering for Case 1

Download Yang et al. supplementary movie 1(Video)
Video 1.7 MB

Yang et al. supplementary movie 2

Evolution of layering for Case 2

Download Yang et al. supplementary movie 2(Video)
Video 2 MB

Yang et al. supplementary movie 3

Evolution of layering for Case 3

Download Yang et al. supplementary movie 3(Video)
Video 2.6 MB

Yang et al. supplementary movie 4

Evolution of layering for Case 4

Download Yang et al. supplementary movie 4(Video)
Video 8 MB

Yang et al. supplementary movie 5

Evolution of layering for Case 5

Download Yang et al. supplementary movie 5(Video)
Video 9.3 MB

Yang et al. supplementary movie 6

Evolution of layering for Case 6

Download Yang et al. supplementary movie 6(Video)
Video 8.2 MB

Yang et al. supplementary movie 7

Evolution of layering for Case 7. The initially slowly growing stage of the single vortical layer is skipped, and the movie starts from the nondimensional time 10000.

Download Yang et al. supplementary movie 7(Video)
Video 8.7 MB