Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:42:48.288Z Has data issue: false hasContentIssue false

GaN p-n Structures Fabricated by Mg Ion Implantation

Published online by Cambridge University Press:  13 June 2014

V.A. Dmitriev
Affiliation:
MSRCE, Howard University, Washington, D.C., USA; TDI, Inc., Gaitherburg, MD, USA.

Abstract

In this paper we report on the first GaN p-n diodes fabricated by Mg ion implantation doping of n-type GaN epitaxial layers. Ion implantation was performed at room temperature. Implantation dose ranged from 1013 to 2×1016 cm−2. After implantation samples were annealed for 10-15 s at a wide temperature interval from 600°C to 1200°C in flowing N2 to form p-type layers. Secondary ion mass spectroscopy, scanning electron microscopy with electron beam induced current and back scattered electron modes as well as current-voltage and capacitance-voltage measurements were used to study structural and electrical characteristics of the Mg implanted p-n structures.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Mg depth profiles in the n-GaN epitaxial layer after ion implantation (curve 1) and after annealing (curve 2).

Figure 1

Figure 2.Cross-section of the Mg doped GaN p-n junction (top) and BSE/EBIC signal profiles across the p-n junction (bottom).

Figure 2

Figure 3.Capacitance-voltage characteristic for the GaN p-n junction fabricated by Mg ion implantation.

Figure 3

Figure 4.I-V characteristic of the Mg doped GaN p-n junction.