Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T07:51:36.947Z Has data issue: false hasContentIssue false

Electroconvection near an ion-selective surface with Butler–Volmer kinetics

Published online by Cambridge University Press:  11 November 2021

Gaojin Li
Affiliation:
School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR ChinaRobert Frederick Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY 14853, USA
Alex Townsend
Affiliation:
Department of Mathematics, Cornell University, Ithaca, NY 14853, USA
Lynden A. Archer
Affiliation:
Robert Frederick Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY 14853, USA
Donald L. Koch*
Affiliation:
Robert Frederick Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY 14853, USA
*
†Email address for correspondence: dlk15@cornell.edu

Abstract

We study the effects of interfacial kinetics on the electro-hydrodynamics of ion transport near an ion-selective surface using a combination of linear stability analysis and numerical simulation. The finite kinetics of the electrolyte–electrode interface affects the ion transfer and electroconvection in many ways. On a surface of fixed topography, such as a metal surface of slow and stable ion deposition or covered by a polymer membrane, the finite kinetics reduces the current in one-dimensional ion diffusion/migration, increases the critical voltage for the onset of the electroconvective instability, changes the dynamics of the electroconvection and the overlimiting current, and enhances the lateral ion diffusion within the interfacial layer. The first three effects are indirectly caused by the reaction kinetics and can be characterized by an effective voltage difference across the liquid electrolyte. In comparison, the last effect is controlled by a direct interplay between kinetics and nonlinear electroconvection. Scaling laws for ion transport and features of electroconvection are proposed. We also analyse the linear stability of a surface which evolves under ion deposition and find that the finite kinetics decreases the growth rate of both electroconvective and morphological instabilities and therefore modifies the wavenumber of the most unstable mode.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of the different regions (not drawn to scale) formed in an electrolyte near a fixed ion-selective surface of finite kinetics under an applied voltage $V$. The double layer of nanometre thickness is not resolved. At high voltage, the electrolyte undergoes an electroconvective instability governed by the potential difference $V-\varPhi _s$, where $\varPhi _s$ is the interfacial potential at the inner edge of the space charge layer. For a non-fixed depositing surface such as metal electrode, the bottom boundary is subjected to a morphological perturbation.

Figure 1

Figure 2.The current for steady 1-D ion transport as a function of ($a$) the applied total voltage $V$ and ($b$) the voltage across the electrolyte $V-\varPhi _s$ at $\delta =10^{-3}$. The results for the B–V conditions (coloured lines) overlay with each other.

Figure 2

Figure 3.($a$) The ion concentrations (red, $c^+$; blue, $c^-$) and ($b$) potential $\varPhi$ profiles for the 1-D steady ion transport, $\delta =10^{-3}$.

Figure 3

Figure 4.The effects of the boundary condition, double layer thickness $\delta$ and Damköhler number on the variations of ($a$) the ion concentrations $c^\pm _s$, ($b$) potential $\varPhi _s$ at the interface and ($c,d$) the thickness of the space charge layer $\delta _s$ with the applied voltage $V$ for 1-D transport.

Figure 4

Figure 5.The neutral stability curves plotted in terms of ($a$) $V$ and ($b$) $V-\varPhi _s$ versus the wavenumber $k$ for the electroconvective instability at different $Da$ predicted by the full analysis, $\delta =10^{-3}$.

Figure 5

Figure 6.($a$) The dependence of the critical voltage $V_{cr}$ on the Damköhler number $Da$ at $Pe=0.5$. ($b$) The dependence of the critical voltage $V_{cr}$ on the Péclet number $Pe$ for $\delta =10^{-5}$.

Figure 6

Figure 7.Eigenfunctions for perturbed ($a, b$) ion concentration, ($c$) potential and ($d$) velocities for the electroconvective instability predicted by the full analysis for $V=25, k=10$ and $\delta =10^{-3}$.

Figure 7

Figure 8.The growth rate for the full analysis of the combined electroconvective (EC) and morphological instability (lines) and the bulk analysis of the purely morphological instability for $k\gg 1$ (circles) at different $Da$.

Figure 8

Figure 9.($a$) The dependence of the characteristic wavenumbers of the unstable modes on the applied voltage for (red) $Da\to \infty$ and (green) $Da=1$, $\delta =10^{-3}$ obtained from the full analysis. The wavenumbers $k_{m, {EC}}$ and $k_{m, {M}}$ correspond to the most unstable electroconvective and morphological modes, and $k_0$ is the critical wavenumber above which the modes decay. The circles show the voltages at which the growth rate of the most unstable electroconvective mode exceeds that of the morphological mode. ($b$) Dependence of $k_{m, {M}}$ on $Da$ at $V=25$. The thick dashed line is an empirical fit.

Figure 9

Figure 10.Comparison the simulation and experiment results of the time- and $x$-averaged current density $\langle \bar {I}\rangle$ at different voltages and Damköhler numbers.

Figure 10

Figure 11.Distribution of ($a$) time and $x$-averaged cation concentration $\langle \overline {c^+}\rangle$ and ($b$) mean kinetic energy $\langle \overline {E_k}\rangle$ versus wall-normal coordinate $y$ at different voltages $V=20$ (red), $V=40$ (green), $V=60$ (blue) and $V=80$ (black) for $\delta =10^{-3}$. The inset in ($a$) is a closer view near $y=0$.

Figure 11

Figure 12.($a$) Time history of the $x$-average current $\langle I\rangle$ at $V=40$ and $\delta =10^{-3}$. Circles show the time instants for the flow fields in figure 13. ($b$) The dependence of average current $\langle \bar {I}\rangle$ and average interfacial potential $\langle \bar {\varPhi }_s\rangle$ on $Da$. The red triangles represent the interfacial potential for the 1-D ion transport. The bars show the standard deviations.

Figure 12

Figure 13.The typical concentration and velocity fields (left – cation concentration $c^+$; right – normal velocity $v$) at $V=40$ and different $Da$. The white contour lines show high flux regions of ($a$–$d$) $I^+_y=-6$ and ($e$) $I^+_y=-3$. The black lines are the streamlines. Movies are available in the supplementary movies are available at https://doi.org/10.1017/jfm.2021.907.

Figure 13

Figure 14.The dependence of ($a$) the average current $\langle \bar {I}\rangle$, ($b$) the peak values $u_{max}$ and $v_{max}$ of the root mean square (r.m.s.) of velocities $u'$ and $v'$, ($c$) the corresponding positions $\delta _x$ and $\delta _y$ for the peaks of $u_{max}$ and $v_{max}$ and ($d$) the average interfacial cation concentration $\langle \bar {c}^+_s\rangle$ on $V-\langle \bar {\varPhi }_s\rangle$ for simulations with different choices of applied voltage $V$ and domain length $W$. Fitting curves are plotted to guide the eye. The bars in ($a$) and ($d$) show the standard deviations. The inset in ($a$) shows the scaling of the overlimiting current increment $\Delta I=\langle \bar {I}\rangle -I_{lim}$ versus the voltage difference $\Delta V=V-\langle \bar {\varPhi }_s\rangle -(V_{cr}-\langle \bar {\varPhi }_{s, cr}\rangle )$. The inset in ($b$) shows the definitions of $u_{max}, v_{max}$ and $\delta _x, \delta _y$ and the distribution of r.m.s. of velocities $u'$ and $v'$ at $V=40$ and $Da=1$.

Figure 14

Figure 15.The instantaneous distribution of different variables across the electrolyte along the $x$-axis for ($a$)  $Da=200$ ($b$)  $Da=20$ and ($c$)  $Da=2$ at $t=1.6$, $V=40$. The grey regions show the normal velocity $v$ of the fluid. The alternating regions of positive and negative $v$ show the upward and downward flows at this particular time instant. The red solid and green dash–dotted lines show the fluctuations of the interfacial potential $\varPhi _s-\langle \bar {\varPhi }_s\rangle$ and the interfacial cation concentration $c_s-\langle \bar {c}_s\rangle$, the average potentials are $\langle \bar {\varPhi }_s\rangle =5.19, 6.69, 10.5$ and concentration $\langle \bar {c}_s\rangle =8.7\times 10^{-3}, 7.8\times 10^{-3}, 7.9\times 10^{-3}$, respectively. The thick black and blue dotted lines show the two components of the cation flux $I_x^+$ and $I_y^+$ at the bottom surface.

Figure 15

Figure 16.Comparison of the neutral curves for the electroconvective instability derived by two different boundary conditions. In ($b$), the lines for the traditional boundary conditions which resolve the double layer are shifted upward by a constant voltage $dV=3.63, 3.75$ and 3.89 for $\delta =10^{-3}, 10^{-4}$ and $10^{-5}$, respectively.

Figure 16

Figure 17.Comparison of the eigenfunctions for the electroconvective instability using two different boundary conditions for $V=40, k=10$ and $\delta =10^{-3}$.

Li et al. supplementary movie 1

Da=0.1, cation concentration field

Download Li et al. supplementary movie 1(Video)
Video 8.3 MB

Li et al. supplementary movie 2

Da=0.1, v-velocity field

Download Li et al. supplementary movie 2(Video)
Video 7.7 MB

Li et al. supplementary movie 3

Da=1, cation concentration field

Download Li et al. supplementary movie 3(Video)
Video 8.5 MB

Li et al. supplementary movie 4

Da=1, v-velocity field

Download Li et al. supplementary movie 4(Video)
Video 6.9 MB

Li et al. supplementary movie 5

Da=Infinity, cation concentration field
Download Li et al. supplementary movie 5(Video)
Video 8.7 MB

Li et al. supplementary movie 6

Da=Infinity, v-velocity field. White lines represent the region of cation flux Iy+=-6.

Download Li et al. supplementary movie 6(Video)
Video 10.1 MB