Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T04:53:37.894Z Has data issue: false hasContentIssue false

Characteristics of small-scale shear layers in a temporally evolving turbulent planar jet

Published online by Cambridge University Press:  14 June 2021

Masato Hayashi
Affiliation:
Department of Mechanical Systems Engineering, Nagoya University, Nagoya 464-8603, Japan
Tomoaki Watanabe*
Affiliation:
Department of Aerospace Engineering, Nagoya University, Nagoya 464-8603, Japan
Koji Nagata
Affiliation:
Department of Aerospace Engineering, Nagoya University, Nagoya 464-8603, Japan
*
†Email address for correspondence: watanabe.tomoaki@c.nagoya-u.jp

Abstract

Characteristics of small-scale shear layers are studied with direct numerical simulations of a temporally evolving turbulent planar jet. The shear layers that internally exist in turbulence are detected with a tensor of shearing motion, which is extracted from a velocity gradient tensor with a triple decomposition. Flow visualization of the shear intensity confirms the existence of layer structures with intense shear. The mean flow characteristics around local maxima of the shear intensity are investigated with averages taken in the shear coordinate system, which is defined based on the shear orientation. The mean flow pattern reveals that the shear layer is formed in a biaxial strain field, which consists of extensive strain in the vorticity direction of the shear and compressive strain in the direction perpendicular to the shear layer. The velocity components associated with the shear and biaxial strain rapidly change around the shear layer. The Kolmogorov scales characterize the mean characteristics of shear layers, such as velocity jumps, thickness and the intensities of shear and biaxial strain. These quantities normalized by the Kolmogorov scales only weakly depend on lateral positions in the planar jet. Although the turbulent planar jet evolves under the influence of mean shear, a large number of the shear layers do not align with the mean shear direction. The typical shear layer thickness is about six times the Kolmogorov length scale. Furthermore, the shear layer thickness is well predicted by the Burgers vortex layer.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Table 1.Computational and physical parameters of DNS. The statistics shown in the table are taken at $t=20t_r$. Parameters $\varDelta _y$, $\eta$, $\lambda$ and $Re_\lambda$ are obtained at $y=0$.

Figure 1

Figure 1.Development of the temporally evolving turbulent planar jet with (a–d) $Re_J=4000$ and (e–h) $Re_J=40\,000$. Passive scalar $\phi$ is visualized on an $x$–$y$ plane at (a,e) $t/t_r=0$, (b,f) $t/t_r=5$, (c,g) $t/t_r=10$ and (d,h) $t/t_r=15$.

Figure 2

Figure 2.Lateral profiles of (a) mean streamwise velocity $\langle u\rangle$ and (b) r.m.s. streamwise velocity fluctuations $u_{rms}$. Here $\langle u\rangle$ and $u_{rms}$ are normalized by the mean centreline velocity $\langle u\rangle _{y0}$ and the lateral coordinate $y$ is normalized by the jet half-width defined with $\langle u\rangle$. The DNS results are compared with previous experiments and DNS of spatially evolving planar jets, where the legend also presents the streamwise location $x/H$ and the Reynolds number $Re_J$ (Gutmark & Wygnanski 1976; Namer & Ötügen 1988; Stanley, Sarkar & Mellado 2002; Klein, Sadiki & Janicka 2003; Deo, Mi & Nathan 2008; Deo, Nathan & Mi 2013; Terashima, Sakai & Nagata 2012; Watanabe et al.2014b,c; da Silva, Lopes & Raman 2015; Takahashi et al.2019; Matsubara, Alfredsson & Segalini 2020).

Figure 3

Figure 3.(a) Turbulent volume $V_T$ and $-V_T'=-\textrm {d}V_T/\textrm {d}(\mathrm {log}_{10}\omega _{th})$ plotted against the detection threshold $\omega _{th}$. The vertical lines in the inset represent $\omega _{th}$ visualized in (b). (b) Logarithmic contour of enstrophy $\omega ^{2}/2$ and isoline of $\omega =\omega _{th}$ on an $x$–$y$ plane with $\omega _{th}=0.01\langle \omega \rangle _{y0}$, $0.006\langle \omega \rangle _{y0}$ and $0.002\langle \omega \rangle _{y0}$. These results are obtained in DNS for $Re=10\,000$.

Figure 4

Figure 4.Lateral profiles of (a) intermittency factor $\gamma$, (b) integral length scale and Kolmogorov length scale and (c) characteristic velocity scale of large-scale motions and Kolmogorov velocity scale at $t=20t_r$ in DNS for $Re_J=10\,000$. The intermittency factor is compared with experimental data measured at the streamwise distance from the jet nozzle of $x/H=20$ and $40$ in a turbulent planar jet with $Re_J=2200$ (Watanabe et al.2015). (b,c) Comparison of length and velocity scales defined with conventional averages ($L_{0}$, $\eta$, $u_{0}$ and $u_\eta$) and averages of turbulent fluids ($L_{0T}$, $\eta _T$, $u_{0T}$ and $u_{\eta T}$).

Figure 5

Figure 5.Temporal evolution of length scales $L_{0}$, $\lambda$ and $\eta$ on the jet centreline ($Re_J=4000$).

Figure 6

Figure 6.(a) Shear coordinate defined with a shear tensor $\boldsymbol {\nabla } {\boldsymbol {u}}_{S}$. A flow field around a local maximum of $I_S$ used in the shear layer analysis: (b) $x$–$y$ plane; (c) $\zeta _2$–$\zeta _3$ plane of the shear coordinate. The circle at the centre of each panel marks the location of the local maximum of $I_S$. The relative velocity with respect to the local maximum location of $I_S$ is shown on each plane.

Figure 7

Figure 7.Colour contour plots of (a) $I_S$, (b) $I_R$ and (c) $I_E$ on an $x$–$y$ plane in the planar jet with $Re_J=10\,000$ ($t=20t_r$). The maximum value of colour contour $\langle I_\alpha \rangle +4I_{\alpha rms}$ ($\alpha =S,R$ or $E$) is determined with the statistics at $y=0$.

Figure 8

Figure 8.(a) Visualization of isosurfaces of $I_S=I_{Sth}$ in the planar jet with $Re_J=10\,000$ ($t=20t_r$), where $I_{Sth}=\langle I_S\rangle +4I_{Srms}$ is calculated with $\langle I_S\rangle$ and $I_{Srms}$ at $y=0$. (b) Close-up of one of the isosurfaces in (a).

Figure 9

Figure 9.(a) Lateral profiles of mean values of $I_S$, $I_R$ and $I_E$. (b) Averages of enstrophy production terms in (4.1). (c) Relative contribution to mean enstrophy production $\langle (P_{\omega })_{\alpha \beta \gamma }\rangle _T/\langle P_{\omega }\rangle _T$. The results are taken from the planar jet with $Re_J=10\,000$ ($t=20t_r$).

Figure 10

Figure 10.The p.d.f.s of $I_S$, $I_R$ and $I_E$ at (a) $y=0$ and (b) $y=1.2b_u$ of the planar jet with $Re_J=10\,000$ ($t=20t_r$). (c) The p.d.f.s of $I_S$, $I_R$ and $I_E$ in homogeneous isotropic turbulence with $Re_{\lambda }=72$ taken from DNS used in Watanabe et al. (2020).

Figure 11

Figure 11.Mean velocity vector and colour contour of $\overline {I_S}$ on (a) $\zeta _2$–$\zeta _3$ plane at $\zeta _1=0$ and (b) $\zeta _1$–$\zeta _2$ plane at $\zeta _3=0$. The length of the vectors represents the magnitude of the velocity vector on each plane. The results are taken at $y=0$ of the planar jet with $Re_J=10\,000$.

Figure 12

Figure 12.Mean velocity vector and $\overline {I_S}$ of the shear layers at $y/b_u=1$ ($Re_J=10\,000$) on (a) $\zeta _2$–$\zeta _3$ plane at $\zeta _1=0$ and (b) $\zeta _1$–$\zeta _2$ plane at $\zeta _3=0$.

Figure 13

Figure 13.Mean velocity profiles around local maxima of $I_S$ on (a) $\zeta _1$ axis and (b) $\zeta _2$ axis. The results are taken on the centreline of the planar jet with $Re_J=10\,000$.

Figure 14

Figure 14.Definitions of the velocity jump $\Delta u_i$ and its width $\delta _i$ of a mean velocity profile around shear layers.

Figure 15

Figure 15.The $Re_\lambda$ dependence of the mean velocity jumps around shear layers: (a) $\Delta u_i$ normalized by the Kolmogorov velocity scale $u_\eta$; (b) $\Delta u_i$ normalized by the velocity scale of large-scale motions $u_0$. The results at the centre ($y=0$) of the planar jets (JET) are compared with DNS results of homogeneous isotropic turbulence (HIT) (Watanabe et al.2020). The broken lines in (b) represent power laws obtained with a least square method applied to the jet data.

Figure 16

Figure 16.The $Re_\lambda$ dependence of the characteristic length scales $\delta _i$ of shear layers: (a) $\delta _i$ normalized by the Kolmogorov length scale $\eta$; (b) $\delta _i$ normalized by the integral scale $L_0$. The results at the centre ($y=0$) of the planar jets (JET) are compared with DNS results of homogeneous isotropic turbulence (HIT) (Watanabe et al.2020). The broken lines in (b) represent power laws obtained with a least square method applied to the jet data.

Figure 17

Figure 17.The number density $N_{SH}$ of local maxima of $I_S$ used in the shear layer analysis. Here $N_{SH}$ calculated in the entire turbulent region of the jet is plotted against $Re_{\lambda }$ on the jet centreline.

Figure 18

Figure 18.The $Re_\lambda$ dependence of (a) mean intensities of shear $\overline {I_{S}}$ and elongation $\overline {I_{E}}$ at $(\zeta _1,\zeta _2,\zeta _3)=(0,0,0)$ normalized by $u_0/L_0$ and (b) shear Reynolds number $Re_S$. The results at the centre ($y=0$) of the planar jets (JET) are compared with DNS results of homogeneous isotropic turbulence (HIT) (Watanabe et al.2020). The broken lines in (a) represent power laws obtained with a least square method applied to the jet data.

Figure 19

Figure 19.The p.d.f.s of shear layer thickness normalized by (a) Kolmogorov length scale $\eta$ and (b) Burgers vortex layer thickness $\delta _{BV}$ at $y=0$.

Figure 20

Figure 20.Lateral profiles of (a) $\Delta u_i/u_{\eta T}$ and (b) $\delta _i/\eta _T$ in the planar jet.

Figure 21

Figure 21.Lateral profiles of (a) $\overline {I_{S}}/(u_{\eta T}/\eta _T)$ and $\overline {I_{E}}/(u_{\eta T}/\eta _T)$ and (b) $Re_{S}$ in the planar jet.

Figure 22

Figure 22.The p.d.f.s of shear layer thickness $\delta _S$ obtained at different lateral positions of the planar jet with $Re_J=10\,000$. Thickness $\delta _S$ is normalized by (a) Kolmogorov length scale $\eta _T$ and (b) Burgers vortex layer thickness $\delta _{BV}$.

Figure 23

Figure 23.Statistics of shear vorticity $({\boldsymbol {\omega }}_S)_{i}$ at the centre of the shear layers ($Re_J=10\,000$). (a) Lateral profiles of the averages of shear vorticity components $\overline {({\boldsymbol {\omega }}_S)_{x}}$, $\overline {({\boldsymbol {\omega }}_S)_{y}}$ and $\overline {({\boldsymbol {\omega }}_S)_{z}}$. (b) The p.d.f. of $({\boldsymbol {\omega }}_S)_{z}$ of the shear layer detected at $y/b_u=0$ and $1$. (c) The p.d.f. of $({\boldsymbol {\omega }}_S)_{z}$ of the shear layers which are located in $0< y_I/\eta \leqslant 20$, $20< y_I/\eta \leqslant 40$ or $40< y_I/\eta \leqslant 60$. Here, $y_I$ is the distance in the $y$ direction from the shear layer to the isosurface of $\omega =\omega _{th}$ and $\eta$ is taken at $y=0$.