Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T08:18:11.545Z Has data issue: false hasContentIssue false

Generation and stability of inertia–gravity waves

Published online by Cambridge University Press:  04 November 2016

P. Maurer*
Affiliation:
Univ Lyon, Ens de Lyon, Univ Claude Bernard Lyon 1, CNRS, Laboratoire de Physique, F-69342 Lyon, France
S. Joubaud*
Affiliation:
Univ Lyon, Ens de Lyon, Univ Claude Bernard Lyon 1, CNRS, Laboratoire de Physique, F-69342 Lyon, France
P. Odier*
Affiliation:
Univ Lyon, Ens de Lyon, Univ Claude Bernard Lyon 1, CNRS, Laboratoire de Physique, F-69342 Lyon, France

Abstract

In the ocean, stratification and rotation allow for the existence of inertia–gravity waves. Instabilities of these waves, such as triadic resonant instability (TRI), may play a key role in the mixing process of the deep ocean. In an experimental set-up, we generate inertia–gravity waves which may become unstable depending on the background rotation and wave frequency. The instability produces secondary waves that match the spatial and temporal resonance conditions of TRI. The effect of rotation is introduced in a pre-existing theory and results in a prediction of the growth rate of TRI in the case of an infinite plane wave. The issue of finite size of the beam is then addressed using a simple model in which we show that the instability is enhanced in a given range of Coriolis parameter. Finally, we compare the experimental threshold of the instability with the model, and find good agreement except at higher rotation rate. At constant primary wave frequency, we analyse the evolution of the secondary wave characteristics with rotation. The appearance of unexpected sub-inertial secondary waves may be related to the discrepancy observed between predicted and experimental thresholds at higher rotation.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.(a) Experimental set-up fixed to a rotating table, which permits the production of inertia–gravity waves in the tank, with controlled $N$ and $f$. Synthetic schlieren and particle image velocimetry (PIV) are used to investigate the wave properties. (b) Density profile along the vertical axis $z$ expressed as the difference between the measured density and the density of pure water. (1) Profile taken before rotation, (2) profile taken after linearly accelerating the table to 9.54 rpm during 15 min and (3) profile taken after 2 h of constant rotation at 9.54 rpm ($f=2~\text{rad}~\text{s}^{-1}$). It should be noted that this rotation rate, used here for the purpose of this test, is much larger than the values used for our experiments in what follows. The dashed line (4) is a linear adjustment leading to a value of $N=1.13~\text{rad}~\text{s}^{-1}$. For the sake of clarity, curves (2)–(4) are shifted vertically by respectively 5, 10 and 15 cm.

Figure 1

Figure 2.The dimensionless frequency $\unicode[STIX]{x1D714}_{0}/N$ of an inertia–gravity wave plotted versus the angle of propagation $\unicode[STIX]{x1D703}_{0}$ defined in (2.2) for various values of the dimensionless Coriolis parameter $f/N$ ranging from 0 to 0.85. The lines are theoretical predictions (from (2.2)) over which are plotted experimental measurements. For all of these experiments $N$ was close to $1~\text{rad}~\text{s}^{-1}$. The inset shows a typical snapshot of a density-gradient field obtained from synthetic schlieren, for the following parameters: $\unicode[STIX]{x1D714}_{0}/N=0.66$ and $f/N=0.35$.

Figure 2

Figure 3.Snapshots of the vertical density field, $\unicode[STIX]{x2202}_{z}\unicode[STIX]{x1D70C}^{\prime }(x,z,t)$, at $t=50~T_{0}$ displayed in an ($f/N,\unicode[STIX]{x1D714}_{0}/N$) plane. The disposition of the snapshots indicates the relative importance of $f/N$ and $\unicode[STIX]{x1D714}_{0}/N$: (a) $(\unicode[STIX]{x1D714}_{0}/N,f/N)=(0.66,0.05)$, (b) $(\unicode[STIX]{x1D714}_{0}/N,f/N)=(0.66,0.2)$, (c) $(\unicode[STIX]{x1D714}_{0}/N,f/N)=(0.8,0.2)$. For the three experiments, the wavemaker has the geometrical characteristics ($\ell _{0}=72~\text{m}^{-1}$, $a_{0}=5~\text{mm}$). The top left panels $(a^{\prime })$, $(b^{\prime })$ and $(c^{\prime })$ show time series taken in respectively experiment (a), (b) and (c) at a point located 5 cm below the wavemaker, roughly at the centre of the wave beam (indicated by a star in wave field a).

Figure 3

Figure 4.(a) The time–frequency diagram corresponding to the unstable wave presented in figure 3(c) ($\unicode[STIX]{x1D714}_{0}/N=0.8$, $f/N=0.2$, $\ell _{0}=72~\text{m}^{-1}$, $a_{0}=5~\text{mm}$). Here, $S_{z}$ is the time–frequency spectrum of the vertical density-gradient field, computed on a $30T_{0}$ wide sliding time window. (b) The corresponding experimental measurement of secondary wave dimensionless wavevector components $\ell _{1,2}/\ell _{0}$ and $m_{1,2}/m_{0}$ of the same unstable wave. Ellipses represent the experimental errors as described in § 2.2. The black (grey) lines represent the theoretical resonance locus for $f/N=0.2$ ($f/N=0$). The positions corresponding to the maximum growth rate (3.6) are indicated by two grey circles.

Figure 4

Figure 5.(a) The evolution of the theoretical threshold of TRI in the case of an infinite plane inertia–gravity wave of horizontal wavenumber $\ell _{0}=80~\text{m}^{-1}$. The threshold is represented by the critical Reynolds number $Re_{c}=2\unicode[STIX]{x03C0}\unicode[STIX]{x1D6F9}_{0,c}/\unicode[STIX]{x1D708}$ and is plotted versus $f/N$ at constant $\unicode[STIX]{x1D714}_{0}/N$. (b) The growth rate (3.6) at different values of the Coriolis parameter $f/N$, renormalized by the maximum growth rate at $f/N=0$ ($\unicode[STIX]{x1D70E}_{0}=0.11~\text{s}^{-1}$) versus the horizontal component $\ell _{1}$ of one of the secondary wavevectors, for a primary wave at ($\ell _{0}=80~\text{m}^{-1}$, $\unicode[STIX]{x1D714}_{0}/N=0.8$, $Re=188$).

Figure 5

Figure 6.(a) Schematics of the triadic resonant interaction, highlighting the existence of an interaction zone of width $W$ corresponding to the width of the primary wave. (b) Typical transverse profile of the wave amplitude, for the wave presented in figure 3(a) extracted by Hilbert transform. (c,d) The ratio of the outgoing advection rate of the secondary waves away from the primary wave beam over the maximum growth rate of the instability, as a function of $f/\unicode[STIX]{x1D714}_{0}$. This ratio is shown individually for each secondary wave and also for the sum of both advection rates, which directly compares the two terms of (3.10):$(1/4)(|\boldsymbol{v}_{g,1}\boldsymbol{\cdot }\boldsymbol{n}_{\bot }|+|\boldsymbol{v}_{g,2}\boldsymbol{\cdot }\boldsymbol{n}_{\bot }|)/2\unicode[STIX]{x1D706}\unicode[STIX]{x1D70E}_{max}$. Inset: corresponding maximum growth rate $\unicode[STIX]{x1D70E}_{max}$ (normalized by the maximum growth rate at $f=0$, $\unicode[STIX]{x1D70E}_{0}$). Two different sets of parameters are considered: (c) experimental parameters ($\unicode[STIX]{x1D714}_{0}/N=0.8$, $\ell _{0}=80~\text{m}^{-1}$ and $Re=188$); (d) oceanic case, where parameter values are taken from Gayen & Sarkar (2013) and Sun & Pinkel (2013) ($\unicode[STIX]{x1D714}_{0}/N=0.1$, $\ell _{0}=6.3\times 10^{-2}~\text{m}^{-1}$ and $Re=3.9\times 10^{5}$).

Figure 6

Figure 7.Experimental observations showing the triadic resonance stability or instability of a primary wave of dimensionless frequency $\unicode[STIX]{x1D714}_{0}/N$ at Coriolis parameter $f/N$. The fixed parameters are $\ell _{0}=80~\text{m}^{-1}$, $e_{0}=5~\text{mm}$, leading to $Re>100$ for each experiment. The predicted threshold is shown by a dotted line in the infinite beam case, by a dashed line in the finite beam case with a 3-wavelength-wide beam and by a dash-dotted line in the finite beam case with a 1.5-wavelength-wide beam. Our prediction uncertainty due to the uncertainty in the width of the beam is displayed as a light green zone. The hatched zone corresponds to a forbidden zone for TRI: if $\unicode[STIX]{x1D714}_{1}$ and $\unicode[STIX]{x1D714}_{2}$ are larger than $f$, then according to the space resonance condition, $\unicode[STIX]{x1D714}_{0}$ is larger than $2f$. The larger symbols help to locate on this graph the experiments described in other figures of this article, with the figure number indicated. The horizontal dashed line indicates $\unicode[STIX]{x1D714}_{0}/N=0.8$, which corresponds to the experiments presented in figure 8.

Figure 7

Figure 8.Renormalized amplitude of the fast Fourier transform of the vertical gradient of density over a $30T_{0}$ time window at $t\approx 90T_{0}$, for a primary wave propagating at $\unicode[STIX]{x1D714}_{0}/N\simeq 0.8$ and for various values of $f/N$, which correspond to $63.2^{\circ }<\unicode[STIX]{x1D703}<68.9^{\circ }$. For the sake of clarity, the spectra are shifted vertically by a multiple of 3, the vertical axis values corresponding to the case $f/N=0$. On each spectrum, a red dot indicates the value of $f/N$ and separates it into two parts, one in green on the left where $\unicode[STIX]{x1D714} and one on the right where $\unicode[STIX]{x1D714}>f$. A vertical dashed line indicates $\unicode[STIX]{x1D714}/N=0.4$, which corresponds roughly to $\unicode[STIX]{x1D714}_{0}/N/2$. On each spectrum, the peak on the right represents the primary wave, and daughter waves correspond to the other peaks, identified with a cross. For the sake of clarity, the value $f/N$ is displayed with full precision only when it is necessary, for the experiments just above and just below the threshold.

Figure 8

Figure 9.(a,b,c) Snapshots of the vertical density-gradient field for (a) $t=4T_{0}$, (b) $t=10T_{0}$ and (c) $t=100T_{0}$, with $T_{0}$ the primary wave period. The wave is propagating from the top left to the bottom right. The Coriolis parameter is $f/N=0.39$, the wave frequency is $\unicode[STIX]{x1D714}_{0}/N=0.8$ and the motion amplitude of the generator is 0.5 cm. (d,e,f) Vertical density gradient as a function of time for a point located 5 cm below the wavemaker (indicated by a star in a), filtered at $\unicode[STIX]{x1D714}_{0}$ (d), $\unicode[STIX]{x1D714}_{1}$ (e) and $\unicode[STIX]{x1D714}_{2}$ (f).