Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T09:39:48.957Z Has data issue: false hasContentIssue false

Buoyant displacement flow of immiscible fluids in inclined pipes

Published online by Cambridge University Press:  10 July 2017

A. Hasnain
Affiliation:
Department of Mechanical Engineering, University of Houston, N207 Engineering Building 1, Houston, TX 77204, USA
E. Segura
Affiliation:
Department of Engineering Technology, University of Houston, 304 Technology building 2, Houston, TX 77204, USA
K. Alba*
Affiliation:
Department of Engineering Technology, University of Houston, 304 Technology building 2, Houston, TX 77204, USA
*
†Email address for correspondence: kalba@uh.edu

Abstract

We experimentally study the iso-viscous displacement flow of two immiscible Newtonian fluids in an inclined pipe. The fluids have the same viscosity but different densities. The displacing fluid is denser than the displaced fluid and is placed above the displaced fluid (i.e. a density-unstable configuration) in a pipe with small diameter-to-length ratio ( $\unicode[STIX]{x1D6FF}\ll 1$ ). In the limit considered, six dimensionless groups describe these flows: the pipe inclination angle, $\unicode[STIX]{x1D6FD}$ , an Atwood number, $At$ , a Reynolds number, $Re$ , a densimetric Froude number, $Fr$ , a capillary number, $Ca$ , and the fluids static contact angle, $\unicode[STIX]{x1D703}$ . Our experiments, carried out in an acrylic pipe using wetting salt-water solutions displacing non-wetting oils, cover a fairly broad range of these parameters. Completely different patterns than those of miscible flows have been observed, governed by distinct dynamics. The wetting properties of the displacing liquid and fluids immiscibility are found to significantly increase the efficiency of the displacement. During the early stage of the displacement, strong shearing is observed between the heavy and light layers, promoting Kelvin–Helmholtz instabilities. At later stages, the intensity of Kelvin–Helmholtz instabilities is reduced. However, surface-tension-driven Rayleigh-type instabilities will remain active causing droplet shedding (pearling) at displaced fluid receding contact lines. The speed of the advancing displacing front (inversely related to the displacement efficiency) is measured and characterized in dimensionless maps suggesting high values at low ranges of $Re$ and $Ca$ . Depending on the degree of flow stability and droplet formation, three major flow regimes namely viscous, transitionary and dispersed are characterized and classified in dimensionless maps. In the absence of a mean imposed velocity (exchange flow), it is found that capillary blockage may occur hindering Rayleigh–Taylor instabilities.

Information

Type
Papers
Copyright
© 2017 Cambridge University Press 
Figure 0

Table 1.Parameter range of our experimental study.

Figure 1

Figure 1.(a) Schematic view of the experimental set-up used. (b) Snapshots of the displacement flow for $\unicode[STIX]{x1D6FD}=60^{\circ }$, $\hat{V}_{0}=81.4~\text{mm}~\text{s}^{-1}$, $\hat{\unicode[STIX]{x1D70C}}_{H}=1181~\text{kg}~\text{m}^{-3}$ and $\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$, at times $\hat{t}=[0.41,3.39,6.38,\ldots ,18.27,21.25]~\text{s}$ ($At=0.125$, $Re=163$, $Fr=0.75$, $Ca=0.12$, $\unicode[STIX]{x1D703}=56^{\circ }$). The field of view is $1950\times 9.53~\text{mm}^{2}$. The bottommost image in panel (b) is a colour bar of concentration $C$, with $0$ and $1$ referring to the displaced and displacing fluids respectively. The square in image (6) indicates the location of a receding contact line where droplet shedding occurs.

Figure 2

Figure 2.Snapshots of the displacement flow in figure 1(b) at early times $\hat{t}=[0,0.086,0.172,0.258,\ldots ,0.516,0.602]~\text{s}$ showing the growth of interfacial instability. The domain covers $0~\text{mm}<\hat{x}<245~\text{mm}$. The bottommost image is a colour bar of concentration $C$, with $0$ and $1$ referring to the displaced and displacing fluids respectively.

Figure 3

Figure 3.(a) Snapshots of the concentration for the displacement flow shown in figure 1(b) at times $\hat{t}=[5,5.7,6.4,7.1,7.8]~\text{s}$. The domain covers 600 mm ${<}\hat{x}<1350~\text{mm}$. (b) Cross-sectional-averaged profiles of the concentration corresponding to snapshots in (a).

Figure 4

Figure 4.The dependency of the Richardson number, $Ri$, on wavenumber, $\hat{k}$, for the early time (figure 2) and long-time (figure 3) phases of the displacement flow. The dashed line indicates $Ri=1$ predicting the onset of Kelvin–Helmholtz instabilities as found by Funada & Joseph (2001).

Figure 5

Figure 5.Snapshots of the displacement flow in figure 1(b) at times $\hat{t}=[7.91,8.27,8.63,\ldots ,10.07,10.43]~\text{s}$ showing droplet shedding (pearling) in the vicinity of the highlighted rectangular region in image (1). The domain covers $432~\text{mm}<\hat{x}<805~\text{mm}$. The bottommost image is a colour bar of concentration $C$, with $0$ and $1$ referring to the displaced and displacing fluids respectively.

Figure 6

Figure 6.Change in iso-viscous displacement flow with $\unicode[STIX]{x1D6FD}$. (a) For miscible fluids (salt-water displacing water) of Alba et al. (2013a) ($At=0.0035$, $Re\approx 726$, $Fr\approx 1.48$, $Ca=\infty$). The field of view is $1330\times 19.05~\text{mm}^{2}$ located 1740 mm downstream of the gate valve. (b) For immiscible fluids (current study) obtained for $\hat{\unicode[STIX]{x1D70C}}_{H}=1181~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$ and approximately close imposed flow rates $\hat{V}_{0}\in [71,114]~\text{mm}~\text{s}^{-1}$ ($At=0.125$, $Re\in [146,247]$, $Fr\in [0.66,1.05]$, $Ca\in [0.06,0.25]$, $\unicode[STIX]{x1D703}=56^{\circ }$). The field of view is $1750\times 9.53~\text{mm}^{2}$. The colour bar at the top left of the figures shows the corresponding concentration value, $C$, with $0$ referring to the pure displaced fluid and $1$ to the pure displacing fluid.

Figure 7

Figure 7.Spatio-temporal diagrams of cross-sectional-averaged concentration field, $\bar{C}_{{\hat{y}}}(\hat{x},\hat{t})$, obtained from the same experiments as shown in figure 6(b): (a) $\unicode[STIX]{x1D6FD}=0^{\circ }$, $\hat{V}_{0}=81~\text{mm}~\text{s}^{-1}$; (b) $\unicode[STIX]{x1D6FD}=30^{\circ }$, $\hat{V}_{0}=71~\text{mm}~\text{s}^{-1}$; (c) $\unicode[STIX]{x1D6FD}=45^{\circ }$, $\hat{V}_{0}=80~\text{mm}~\text{s}^{-1}$; (d) $\unicode[STIX]{x1D6FD}=60^{\circ }$, $\hat{V}_{0}=81~\text{mm}~\text{s}^{-1}$; (e) $\unicode[STIX]{x1D6FD}=75^{\circ }$, $\hat{V}_{0}=113~\text{mm}~\text{s}^{-1}$; (f) $\unicode[STIX]{x1D6FD}=85^{\circ }$, $\hat{V}_{0}=73~\text{mm}~\text{s}^{-1}$.

Figure 8

Figure 8.Change in the displacement flow with increasing $\hat{V}_{0}$ for the same parameters as shown in figure 6(b) except for $\unicode[STIX]{x1D6FD}=45^{\circ }$ and (a) $\hat{V}_{0}=0~\text{mm}~\text{s}^{-1}$ (exchange flow), (b) $\hat{V}_{0}=66~\text{mm}~\text{s}^{-1}$, (c) $\hat{V}_{0}=175~\text{mm}~\text{s}^{-1}$, (d) $\hat{V}_{0}=411~\text{mm}~\text{s}^{-1}$ and (e) $\hat{V}_{0}=937~\text{mm}~\text{s}^{-1}$. The snapshots belong to $\hat{t}=10.6,8.8,6.0,2.6,1.3~\text{s}$, respectively ($At=0.125$, $Re\in [0,2196]$, $Fr\in [0,8.67]$, $Ca\in [0,\infty ]$, $\unicode[STIX]{x1D703}=56^{\circ }$). The field of view is $1850\times 9.53~\text{mm}^{2}$.

Figure 9

Figure 9.Examples of formation of capillary blockage between heavy salt water ($\hat{\unicode[STIX]{x1D70C}}_{H}=1067~\text{kg}~\text{m}^{-3}$) and light silicone oil ($\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$) solutions at various inclination angles ($\hat{\unicode[STIX]{x1D70E}}=3.5~\text{mN}~\text{m}^{-1}$). The red dotted lines are guide to the eye showing domed and slumping-type interface shapes as the pipe is inclined towards the horizontal direction.

Figure 10

Figure 10.(a) Evolution of the cross-sectional-averaged concentration field, $\bar{C}_{{\hat{y}}}(\hat{x},\hat{t})$, with time, $\hat{t}=[0.083,1.33,2.583,\ldots ,8.83]~\text{s}$, and streamwise location, $\hat{x}$, measured from the gate valve for the same experiment as in figure 1(b). The red solid line shows $\bar{C}_{{\hat{y}}}=0.05$ which is used as threshold for measuring the displacing front velocity, $\hat{V}_{f}$, consistently. The black dashed line shows $\bar{C}_{{\hat{y}}}=0.9$ used as threshold in measuring the trailing front velocity, $\hat{V}_{tf}$. (b) Evolution of the displacing and trailing front velocity values, $\hat{V}_{f}$ and $\hat{V}_{tf}$, with time for the same experiment.

Figure 11

Figure 11.Change in displacing front velocity, $\hat{V}_{f}$, with tilt angle, $\unicode[STIX]{x1D6FD}$, and imposed flow velocity, $\hat{V}_{0}$, for (a) $At=0.075$ and (b) $At=0.125$. Different markers represent $\hat{V}_{0}=0$ ($\times$ for capillary blockage and ▹ for exchange flow), $50$ (▪), $100$ (♦), $300$ (◂), $500$ (▴), $700$ (*), $900$ (○) and $1100~\text{mm}~\text{s}^{-1}$ (▾). The dashed lines are guide to the eye plotted at $\hat{V}_{f}=50,100,200,\ldots ,1200,1300~\text{mm}~\text{s}^{-1}$.

Figure 12

Figure 12.Presentation of our results for the full range of experiments for $At=0.075$ and $0.125$ ($\unicode[STIX]{x1D703}=56^{\circ }$): normalized front velocity $\hat{V}_{f}/\hat{V}_{0}$, plotted against $Re$ and $Re\cos \unicode[STIX]{x1D6FD}/Fr$. For $0\leqslant Re\lesssim 730$ indicated by a dashed line, we have $V_{f}>1.5$. Normalized front velocity scale is limited to $1.5$ to better show the variations of the front velocity in the plane of $Re$ and $Re\cos \unicode[STIX]{x1D6FD}/Fr$. All the displacement flows in the range given were found to be in the instantaneous regime.

Figure 13

Figure 13.(a) Experimental snapshots for $\unicode[STIX]{x1D6FD}=85^{\circ }$, $\hat{V}_{0}=74~\text{mm}~\text{s}^{-1}$, $\hat{\unicode[STIX]{x1D70C}}_{H}=1181~\text{kg}~\text{m}^{-3}$ and $\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$ at times $\hat{t}=[0.250,1.725,3.200,\ldots ,7.625]~\text{s}$, with a field of view $1800\times 9.53~\text{mm}^{2}$ ($At=0.125$, $Re=148$, $Fr=0.69$, $Ca=0.11$,$\unicode[STIX]{x1D703}=56^{\circ }$). The bottommost image is a colour bar of concentration $C$, with $0$ and $1$ referring to the displaced and displacing fluids respectively. Each snapshot is assigned a letter B to E. The representative UDV profiles to these flows are plotted in panels (b–e). (b) Velocity profile averaged over $\hat{t}=[0,3.00]~\text{s}$, when only the displaced oil flows under the UDV probe. (c) Velocity profile averaged over $\hat{t}=[3.64,5.55]~\text{s}$, when there is a stratification of oil and water layers. The horizontal blue dash-dotted line shows the interface height. The dashed line highlights the region affected by the error due to a moving oil–water interface. (d) Velocity profile at $\hat{t}\approx 5.69~\text{s}$, capturing slip-type behaviour at the upper wall. Similar to panel (c), the dashed line highlights the erroneous region affected by an immiscible oil–water interface. (e) Velocity profile averaged over $\hat{t}=[5.85,7.20]~\text{s}$, when only the displacing water-based solution flows under the UDV probe. The dotted lines in panels (b–e) for ${\hat{y}}\lesssim 1~\text{mm}$, are guides to the eye correcting the UDV refraction errors close to the lower wall.

Figure 14

Figure 14.Static contact angles obtained for salt-water/oil solutions used in our study in the same acrylic pipe as used for the experiments: (a) silicone oil ($\hat{\unicode[STIX]{x1D70C}}=918~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.005~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=3.5~\text{mN}~\text{m}^{-1}$), (b) light viscosity mineral oil ($\hat{\unicode[STIX]{x1D70C}}=853~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.014~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=10.1~\text{mN}~\text{m}^{-1}$) and (c) heavy viscosity mineral oil ($\hat{\unicode[STIX]{x1D70C}}=864~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.084~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=33.4~\text{mN}~\text{m}^{-1}$). The vertical red lines indicate inner pipe wall positions. Note that for the sets shown $At=0.125$.

Figure 15

Figure 15.Snapshots of experiments for immiscible displacement flows for $At=0.125$. (a) Salt-water displacing silicone oil with $\hat{\unicode[STIX]{x1D70C}}_{H}=1181~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.005~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=3.5~\text{mN}~\text{m}^{-1}$ and $\unicode[STIX]{x1D703}=56^{\circ }$ ($Re\in [141,315]$, $Fr\in [0.60,1.19]$, $Ca\in [0.04,0.34]$). From left to right $\hat{V}_{0}=81,73,159~\text{mm}~\text{s}^{-1}$, and $\hat{t}=8.5,8.5,7~\text{s}$. (b) Salt-water displacing light viscosity mineral oil with $\hat{\unicode[STIX]{x1D70C}}_{H}=1097~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D70C}}_{L}=853~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.014~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=10.1~\text{mN}~\text{m}^{-1}$ and $\unicode[STIX]{x1D703}=52^{\circ }$ ($Re\in [45,145]$, $Fr\in [0.46,1.46]$, $Ca\in [0.02,0.51]$). From left to right $\hat{V}_{0}=62,84,196~\text{mm}~\text{s}^{-1}$, and $\hat{t}=10,10,5.4~\text{s}$. (c) Salt-water displacing heavy viscosity mineral oil with $\hat{\unicode[STIX]{x1D70C}}_{H}=1110~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D70C}}_{L}=864~\text{kg}~\text{m}^{-3}$, $\hat{\unicode[STIX]{x1D707}}=0.084~\text{Pa}~\text{s}$, $\hat{\unicode[STIX]{x1D70E}}=33.4~\text{mN}~\text{m}^{-1}$ and $\unicode[STIX]{x1D703}=59^{\circ }$ ($Re\in [7,20]$, $Fr\in [0.46,1.10]$, $Ca\in [0.03,0.57]$). From left to right $\hat{V}_{0}=61,55,148~\text{mm}~\text{s}^{-1}$, and $\hat{t}=14,14,7.5~\text{s}$. The field of view for all the figures shown is $1550\times 9.53~\text{mm}^{2}$ located just below the gate valve.

Figure 16

Figure 16.Snapshots of experiments for immiscible exchange/displacement flows for $\hat{\unicode[STIX]{x1D70C}}_{H}=1355~\text{kg}~\text{m}^{-3}$ and $\hat{\unicode[STIX]{x1D70C}}_{L}=918~\text{kg}~\text{m}^{-3}$ ($At=0.192$ and $\unicode[STIX]{x1D703}=56^{\circ }$). (a) From left to right $\hat{V}_{0}=0~\text{mm}~\text{s}^{-1}$, $\hat{t}=[33.1,11.9,25]~\text{s}$ ($Re=0$, $Fr=\infty$, $Ca=\infty$). Note that at $\unicode[STIX]{x1D6FD}=0^{\circ }$ there occurs capillary blockage. (b) From left to right $\hat{V}_{0}=[10,47,14]~\text{mm}~\text{s}^{-1}$, $\hat{t}=[31.8,8.8,12.5]~\text{s}$ ($Re=[21,102,30]$, $Fr=[0.07,0.35,0.10]$). The position of the displacing front in $\unicode[STIX]{x1D6FD}=0^{\circ }$ case is marked by an arrow. (c) From left to right $\hat{V}_{0}=[15,53,59]~\text{mm}~\text{s}^{-1}$, $\hat{t}=[30.9,7.8,6.75]~\text{s}$ ($Re=[33,114,128]$, $Fr=[0.11,0.39,0.44]$). The field of view in all the snapshots is $1650\times 9.53~\text{mm}^{2}$.

Figure 17

Figure 17.Presentation of our data in the exchange limit ($\hat{V}_{0}=Re=Fr=0$) in the $(Fr/Ca,\sqrt{Ar/2}\cos \unicode[STIX]{x1D6FD})$ plane identifying capillary blockage/non-blockage regimes.

Figure 18

Figure 18.Classification of our results presented in the $(Re,Re\cos \unicode[STIX]{x1D6FD}/Fr)$-plane: (i) viscous flows marked by red circles; (ii) transitionary flows marked with blue triangles; and (iii) dispersed flows marked with green squares. Note that the picture given is primarily obtained for $At\in [0.075,0.125]$ and the contact angle $\unicode[STIX]{x1D703}=56^{\circ }$. The dashed lines correspond to $Re\cos \unicode[STIX]{x1D6FD}/Fr=50$, $Re=730$ and $Re=1000$. The snapshots are obtained for viscous: $\unicode[STIX]{x1D6FD}=85^{\circ }$, $\unicode[STIX]{x1D70C}_{H}=1181~\text{kg}~\text{m}^{-3}$, $\unicode[STIX]{x1D70C}_{L}=918~\text{kg}~\text{m}^{-3}$, $\hat{V}_{0}=74~\text{mm}~\text{s}^{-1}$ at $\hat{t}=7.6~\text{s}$ ($At=0.125$, $Re=148$, $Fr=0.68$, $Ca=0.10$), transitionary: $\unicode[STIX]{x1D6FD}=15^{\circ }$, $\unicode[STIX]{x1D70C}_{H}=1067~\text{kg}~\text{m}^{-3}$, $\unicode[STIX]{x1D70C}_{L}=918~\text{kg}~\text{m}^{-3}$, $\hat{V}_{0}=73~\text{mm}~\text{s}^{-1}$ at $\hat{t}=14.2~\text{s}$ ($At=0.075$, $Re=130$, $Fr=0.87$, $Ca=0.11$) and dispersed flows: $\unicode[STIX]{x1D6FD}=45^{\circ }$, $\unicode[STIX]{x1D70C}_{H}=1067~\text{kg}~\text{m}^{-3}$, $\unicode[STIX]{x1D70C}_{L}=918~\text{kg}~\text{m}^{-3}$, $\hat{V}_{0}=874~\text{mm}~\text{s}^{-1}$ at $\hat{t}=1.8~\text{s}$ ($At=0.075$, $Re=1652$, $Fr=10.44$, $Ca=1.25$). The field of view in the snapshots shown is $1800\times 9.53~\text{mm}^{2}$.