Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T07:34:19.878Z Has data issue: false hasContentIssue false

Mass transfer effects on linear wave propagation in diluted bubbly liquids

Published online by Cambridge University Press:  19 August 2015

D. Fuster*
Affiliation:
Sorbonne Universités, UPMC Université Paris 06, CNRS UMR 7190, Institut Jean le Rond d’Alembert, 75005 Paris, France
F. Montel
Affiliation:
Total SA, CSTJF, Avenue Larribau, 64018 Pau, France
*
†Email address for correspondence: fuster@dalembert.upmc.fr

Abstract

In this article we investigate the importance of mass transfer effects in the effective acoustic properties of diluted bubbly liquids. The classical theory for wave propagation in bubbly liquids for pure gas bubbles is extended to capture the influence of mass transfer on the effective phase speed and attenuation of the system. The vaporization flux is shown to be important for systems close to saturation conditions and at low frequencies. We derive a general expression for the transfer function that relates bubble radius and pressure changes, solving the linear version of the conservation equations inside, outside and at the bubble interface. Simplified expressions for various limiting situations are derived in order to get further insight about the validity of the common assumptions typically applied in bubble dynamic models. The relevance of the vapour content, the mass transfer flux across the interface and the effect of variations of the bubble interface temperature is discussed in terms of characteristic non-dimensional numbers. Finally we derive the various conditions that must be satisfied in order to reach the low-frequency limit solutions where the phase speed no longer depends on the forcing frequency.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.Influence of the vapour content on the real (a) and imaginary (b) parts of the transfer function (3.32) for various Péclet numbers. The values of the non-dimensional quantities $J_{c}^{\ast }$, ${\rm\Delta}H_{\mathit{vap}}^{\ast }$ and ${\rm\Delta}T_{c}^{I}$ are obtained for a $100~{\rm\mu}\text{m}$ air/water vapour bubble at 1 atm and varying temperature (from 25 to 100 °C). The vapour content for the various curves are $Y_{0}=0$, 0.03, 0.27, 0.50, 0.74 and 0.99.

Figure 1

Figure 2.Influence of the vapour content on the phase velocity (a) and attenuation (b) curves obtained from the set of equations summarized in § 4 for gas/vapour bubbles at 1 atm and various ambient temperatures. The vapour content for each condition is $Y_{0}=0.99$, 0.96, 0.89, 0.55 and 0.03. For reference, the red line represents the solution for pure air bubbles $(Y_{0}=0)$ at 1 atm and 25 °C. Mass transfer effects significantly modify both phase speed and attenuation curves for frequencies below resonance. In the low-frequency limit, mass transfer decreases the phase velocity and increases attenuation.

Figure 2

Figure 3.(a) Non-dimensional evaporation flux (4.6) as a function of the vapour content (varied by changing the ambient temperature at a constant pressure equal to 1 atm) and the Sherwood number. (b) Phase lag between the bubble radius and flux oscillation as a function of the vapour content and the Sherwood number.

Figure 3

Figure 4.Dimensionless interface temperature variations (4.11) as a function of the non-dimensional enthalpy of vaporization, ${\rm\Delta}H_{\mathit{vap}}^{\ast }$, and the bubble Péclet number, $\mathit{Pe}_{b}$, for a $100~{\rm\mu}\text{m}$ bubble with large vapour content $Y_{0}=0.99$ (a) and low vapour content $Y_{0}=0.05$ (b).

Figure 4

Figure 5.Phase speed (a) and attenuation curves (b) for an air–water system with $100~{\rm\mu}\text{m}$ bubbles with concentration ${\it\beta}_{0}=10^{-4}$ at $25\,^{\circ }\text{C}$ (red lines, $Y_{0}=0.03$) and $99.9\,^{\circ }\text{C}$ (blue lines, $Y_{0}=0.99$). The continuous lines represent the solution of the full model. The dashed lines represent the solution assuming a constant interface temperature. The two solutions overlap for systems containing gas bubbles, whereas we observe significant differences between them for low-frequency waves propagating in systems with bubbles with a large vapour content.

Figure 5

Figure 6.Real and imaginary parts of $3\mathit{Pe}^{-1}M$, where $M(\mathit{Pe})=\sqrt{\mathit{Pe }\,\text{i}}\coth (\sqrt{\mathit{Pe }\,\text{i}})-1$, as a function of $\mathit{Pe}$.

Figure 6

Figure 7.Phase speed predictions for systems with $100~{\rm\mu}\text{m}$ bubbles with concentration ${\it\beta}_{0}=10^{-4}$ at 1 atm. The ambient temperature is fitted to obtain a vapour molar fraction of 0.95. The dashed black line represents the predictions of the model accounting for mass transfer effects that impose constant temperature at the interface. The solutions obtained from the full model are shown for different values of the enthalpy of vaporization, which are given with respect to the enthalpy of vaporization of water, ${\rm\Delta}H_{vap}^{0}$, such that ${\rm\Delta}H_{r}={\rm\Delta}H_{vap}/{\rm\Delta}H_{vap}^{0}$. For reference, the continuous black line represents the predictions of the model for a pure gas bubble, which neglects mass transfer effects across the interface.

Figure 7

Figure 8.Phase speed in the low-frequency limit ($f=1~\text{Hz}$) as a function of the void fraction and various vapour contents for a monodisperse bubble cloud of $100~{\rm\mu}\text{m}$ bubbles. For reference the solution of pure gas bubbles and the solution of Wood (1930) is included.

Figure 8

Figure 9.Phase speed (a) and attenuation (b) in the low-frequency limit ($f=1~\text{Hz}$) as a function of the vapour content for a monodisperse bubble cloud of $100~{\rm\mu}\text{m}$ bubbles with concentration equal to ${\it\beta}_{0}=10^{-4}$. For reference we include the solution of pure gas bubbles and the approximate solution provided by (6.10) and (6.11).

Figure 9

Figure 10.Sensitivity factor (as defined in (6.13)) as a function of the vapour content and frequency for a $100~{\rm\mu}\text{m}$ gas/vapour bubble. The vapour content is changed by modifying the ambient temperature. As the amount of vapour increases, the bubble radial oscillation is more important for a constant non-dimensional pressure wave amplitude.