Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T11:34:24.682Z Has data issue: false hasContentIssue false

Yield-stress fluid deposition in circular channels

Published online by Cambridge University Press:  06 April 2017

Benoît Laborie*
Affiliation:
Université Paris-Est, Laboratoire Navier, UMR 8205 CNRS, ENPC ParisTech, IFSTTAR, 2 allée Kepler, 77 420 Champs-Sur-Marne, FranceUniversité Paris-Est, ESIEE Paris/ESYCOM, 2 Bd. Blaise Pascal, 93162 Noisy le Grand, France
Florence Rouyer
Affiliation:
Université Paris-Est, Laboratoire Navier, UMR 8205 CNRS, ENPC ParisTech, IFSTTAR, 5 Bd. Descartes 77 454 Champs-Sur-Marne, France
Dan E. Angelescu
Affiliation:
Université Paris-Est, ESIEE Paris/ESYCOM, 2 Bd. Blaise Pascal, 93162 Noisy le Grand, FranceFluidion SAS, 231 Rue St. Honoré, 75001 Paris, France
Elise Lorenceau
Affiliation:
Université Paris-Est, Laboratoire Navier, UMR 8205 CNRS, ENPC ParisTech, IFSTTAR, 2 allée Kepler, 77 420 Champs-Sur-Marne, France
*
†Email address for correspondence: blaborie@lps.ens.fr

Abstract

Since the pioneering works of Taylor and Bretherton, the thickness $h$ of the film deposited behind a long bubble invading a Newtonian fluid is known to increase with the capillary number power $2/3$ ( $h\sim RCa^{2/3}$ ), where $R$ is the radius of the circular tube and $Ca$ is the capillary number, comparing the viscous and capillary effects. This law, known as Bretherton’s law, is valid only in the limit of $Ca<0.01$ and negligible inertia and gravity. We revisit this classical problem when the fluid is a yield-stress fluid (YSF) exhibiting both a yield stress and a shear-thinning behaviour. First, we provide quantitative measurement of the thickness of the deposited layer for Carbopol, a Herschel–Bulkley fluid, in the limit where the yield stress is of a similar order of magnitude to the capillary pressure and for $0.1<Ca<1$ . To understand our observations, we use scaling arguments to extend the analytical expression of Bretherton’s law to YSFs in circular tubes. In the limit of $Ca<0.1$ , our scaling law, in which the adjustable parameters are set using previous results concerning non-Newtonian fluids, successfully retrieves several features of the literature. First, it shows that (i) the thickness deposited behind a Bingham YSF (exhibiting a yield stress only) is larger than for a Newtonian fluid and (ii) the deposited layer increases with the amplitude of the yield stress. This is in quantitative agreement with previous numerical results concerning Bingham fluids. It also agrees with results concerning pure shear-thinning fluids in the absence of yield stress: the shear-thinning behaviour of the fluid reduces the deposited thickness as previously observed. Last, in the limit of vanishing velocity, our scaling law predicts that the thickness of the deposited YSF converges towards a finite value, which presumably depends on the microstructure of the YSF, in agreement with previous research on the topic performed in different geometries. For $0.1<Ca<1$ , the scaling law fails to describe the data. In this limit, nonlinear effects must be taken into account.

Information

Type
Papers
Copyright
© 2017 Cambridge University Press 
Figure 0

Figure 1.(a) Sketch of the experiment with the different length scales of the problem highlighted. (b) Typical images of a YSF plug as it accelerates during the channel flow for $\unicode[STIX]{x1D70F}_{y}=70$ Pa, $R=513~\unicode[STIX]{x03BC}\text{m}$, and an applied pressure $\unicode[STIX]{x0394}P=25$ mbar. The solid lines stand for the measure of $L(t)$. The interval of time between images is equal to 0.33 s. (c) Rheogram of the Carbobol gel used in the experiments: stress ($\unicode[STIX]{x1D70F}$) versus strain rate ($\dot{\unicode[STIX]{x1D6FE}}$). Triangles are obtained with a parallel-plates rheometer, and pentagons are computed from the Mooney–Rabinowitsch formula in a smooth glass capillary ($R=513~\unicode[STIX]{x03BC}\text{m}$) treated with PEI to avoid wall slip. The solid line represents the Herschel–Bulkley law with $\unicode[STIX]{x1D70F}_{y}=70$ Pa, $k=35~\text{Pa}~\text{s}^{n}$ and $n=0.35$.

Figure 1

Table 1.Comparison between rheological properties of Carbopol gels measured by ‘classical’ rheometry (rough parallel-plates rheometer) and computed from the Mooney–Rabinowitsch formula in a smooth glass capillary ($R=513~\unicode[STIX]{x03BC}\text{m}$) treated with PEI to avoid wall slip.

Figure 2

Figure 2.(a) Typical experimental data for a YSF plug pushed at constant pressure ($\unicode[STIX]{x0394}P=50$ mbar) in a capillary of radius $R=702~\unicode[STIX]{x03BC}\text{m}$. Squares: time evolution of the length of the plug ($L$); circles: time evolution of the velocity of the rear meniscus of the plug ($V$). The data points in grey area are excluded from the deposition analysis in regards to finite size effects ($L\leqslant 2R$). Solid and dashed lines are fitting functions used to compute equation (2.1). (b) Film thickness ($h$) deposited by Carbopol plugs ($\unicode[STIX]{x1D70F}_{y}=70$ Pa, $k=35~\text{Pa}~\text{s}^{n}$ and $n=0.35$) as a function of the bubble velocity ($V$) in capillaries of different radii. Squares: $R=702~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P=10$ mbar; triangles: $R=513~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P=20$ mbar; circles: $R=235~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P=30$ mbar. The dashed line stands for the typical variation of the deposited thickness expected for a Newtonian fluid, and the solid line for the typical variation of the deposited thickness predicted for a shear-thinning fluid with $n=0.35$ for $R=1$ mm. The three solid red lines indicate the thicknesses of the sheared layer of YSF in the three tubes deduced from (1.3): $e(R=702~\unicode[STIX]{x03BC}\text{m})=0.32$ mm, $e(R=513~\unicode[STIX]{x03BC}\text{m})=0.21$ mm, and $e(R=235~\unicode[STIX]{x03BC}\text{m})=0.08$ mm; for a given tube’s radius, $h.

Figure 3

Figure 3.(a) Normalized film thickness ($h/R$) as a function of the capillary number $\widehat{Ca}$ for different capillary radii, hence different $B$. Here, $B=0.80$ corresponds to $R=702~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P\simeq 10$ mbar, $e/R=0.46$; $B=0.58$ to $R=513~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P=20$ mbar, $e/R=0.42$; $B=0.27$ to $R=235~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x0394}P=30$ mbar, $e/R=0.34$ and $\unicode[STIX]{x0394}P=100$ mbar, $e/R=0.73$. The symbols obtained by Taylor for different Newtonian fluids (Taylor 1961) are fitted by an empirical expression proposed Aussillous & Quéré (2000) (thick black line). The three other lines (thin black, grey and dash) correspond to (4.7) with $\unicode[STIX]{x1D6FC}=0.33$ and $\unicode[STIX]{x1D6FD}=2.4$. (b) Computed values of the normalized film thickness as a function of $\widehat{Ca}$ extracted from figure 14 of the work by Zamankhan et al. (2012) (full diamonds), and from Jalaal & Balmforth (2016) (open symbols) and fitted for their corresponding values of $B$ and $n$ using (4.7) and $\unicode[STIX]{x1D6FC}=0.33$ and $\unicode[STIX]{x1D6FD}=2.4$.

Figure 4

Table 2.Summary of the dimensionless number used ($Re$ for Reynolds, $Bo$ for Bond, $Ca$ for capillary, $Bi$ for Bingham) to characterize the flow and their respective ranges.

Figure 5

Figure 4.Normalized film thickness as a function of $B=(\unicode[STIX]{x1D70F}_{y}L_{d}/T)$ measured for the smallest accessible velocity for literature results and our experiments: capillaries with $L_{d}=R=235$, 513, 702 $\unicode[STIX]{x03BC}\text{m}$ and $\unicode[STIX]{x1D70F}_{y}=70$ Pa (squares – present work); capillaries with $L_{d}=R=1.93$ mm and $0.2\leqslant \unicode[STIX]{x1D70F}_{y}\leqslant 1.5$ Pa (diamonds – Park et al. (2003)); withdrawal of plate with $L_{d}=\sqrt{T/\unicode[STIX]{x1D70C}g}$ and $8\leqslant \unicode[STIX]{x1D70F}_{y}\leqslant 82$ Pa (triangles – Maillard et al. (2014)). The green dashed line is a guide for the eye indicating the typical $B^{2}$ variation, as in (4.3). The black line stands for (4.7) in the limit of $V\rightarrow 0$ with $\unicode[STIX]{x1D6FC}=0.33$ and $\unicode[STIX]{x1D6FD}=2.4$.