Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T14:19:38.822Z Has data issue: false hasContentIssue false

Collapse of a cohesive granular column

Published online by Cambridge University Press:  22 March 2023

A. Gans
Affiliation:
CNRS, IUSTI, Aix Marseille Université, Marseille, France
A. Abramian
Affiliation:
CNRS, Institut Jean le Rond d'Alembert, Sorbonne Université, Paris, France
P.-Y. Lagrée
Affiliation:
CNRS, Institut Jean le Rond d'Alembert, Sorbonne Université, Paris, France
M. Gong
Affiliation:
Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106-5070, USA
A. Sauret
Affiliation:
Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106-5070, USA
O. Pouliquen
Affiliation:
CNRS, IUSTI, Aix Marseille Université, Marseille, France
M. Nicolas*
Affiliation:
CNRS, IUSTI, Aix Marseille Université, Marseille, France
*
†Email address for correspondence: maxime.nicolas@univ-amu.fr

Abstract

The collapse of a quasi-two-dimensional column of cohesive granular media is investigated experimentally and numerically in the framework of a continuum model. The configuration is an initial parallelepiped-shaped granular pile, which is suddenly released by opening a retaining door. The experiments rely on a model material developed by Gans et al. (Phys. Rev. E, vol. 101, 2020, 032904) made of silica particles coated with polyborosiloxane, for which the adhesive interparticle force can be tuned by controlling the thickness of the coating. Numerically, the collapse is simulated using a simple cohesive rheological model implemented in a two-dimensional Navier–Stokes solver. We investigate the role of cohesion on the stability of the column, the mode of failure, the flow dynamics and the geometry of the final deposit. Our results show that the continuum model captures the main features observed experimentally.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of the experimental set-up showing the initial granular column of length $L_i$ and height $H_i$ (light grey) and the final deposit of length $L_f$ and height $H_f$ (dark grey).

Figure 1

Figure 2.Experimental observations (top grey pictures) and numerical simulation (bottom colour pictures) of the collapse of a cohesive granular column. (a) A stable column with small aspect ratio ($a=0.08$, $\ell _c=4.1$ mm, $\ell _c/H_i=0.2$). (b) Partial collapse for a moderate aspect ratio ($a=0.43$, $\ell _c=4.1$ mm, $\ell _c/H_i=0.08$) with a well-defined slip plane. (c) Collapse of the column ($a=1.9$, $\ell _c=2.8$ mm, $\ell _c/H_i=0.025$), where we observe a ‘surfing wedge’ coming from the top right corner being transported during the flow. The white scale bar corresponds to 4 cm in panels (a) and (b), and to 10 cm in panel (c).

Figure 2

Figure 3.Theoretical analysis of the stability of columns using a cohesive Mohr–Coulomb criterion. (a) Wide column: the corner delimited by the plane inclined at an angle $\alpha$ is stable when the cohesion level $\ell _c/H_i$ is above the black curve $f_{\theta _c}(\alpha )$ in (3.3). The blue line corresponds to a cohesion level leading to stable column, the red line to a marginally stable column where a single angle $\alpha _m=\theta _c/2+{\rm \pi} /4$ is unstable, and the green line to an unstable column. The grey area corresponds to the unstable angles. (b) Truncated pile: the different curves correspond to the stability function $f_{\theta _c,\theta _m}(\alpha )$ in (3.5) for different values of the free-surface inclination $\theta _m$ (i.e. $\theta _m^1=50^{\circ }$, $\theta _m^2=71.4^{\circ }$, $\theta _m^3=80^{\circ }$). The dashed line is the function $({\ell _c}/{H_i})_{crit}(\theta _m)$ in (3.6) above which the truncated pile is stable. (c) Tall column: the stability curves for various aspect ratios $a$ given by $f_{\theta _c,a}(\alpha )$ in (3.8) for $\alpha < \arctan a$ and by $f_{\theta _c}(\alpha )$ in (3.3) for $\alpha > \arctan a$.

Figure 3

Figure 4.Stability diagram in the aspect ratio $a$ versus cohesion level $\ell _c/H_i$ plane for a cohesive granular column. The black curve is the limit of stability. Circles corresponds to experiments, squares to simulation and blue (red) symbols correspond to stable (unstable) columns.

Figure 4

Figure 5.Measurements of the initial failure angle $\alpha _i$ (open circles) and final angle of stability $\alpha _f$ (filled dots) for different cohesion levels $\ell _c/H_i$. Red symbols are from numerical simulations, and blue symbols are from experiments. The continuous line is given by (3.3). The dashed line corresponds to (3.6), giving the limit of stability of truncated piles.

Figure 5

Figure 6.Comparison between the numerical (black) and experimental (blue) profiles of the granular pile at different times for $H_i = 8.9$ cm, $a = 1$ and $\ell _c = 2.8$ mm.

Figure 6

Figure 7.(a) Time evolution of the front position for different cohesion levels in experiments (continuous curves) and simulations (dashed curves) for an aspect ratio $a=1$. Inset: results for $a =0.5$ showing the existence of a significant delay in the experiments before the collapse occurs for the most cohesive material (dark blue, $\ell _c = 3.6$ mm). (b) Velocity of the front $V$ as a function of the aspect ratio $a$ for different cohesion levels. The colour code is the same as in panel (a).

Figure 7

Figure 8.(a) Normalized run-out length ${\rm \Delta} L/L_i$ as a function of the aspect ratio $a$ for different cohesion levels for both experiments and simulations. (b) Normalized height of final deposit $H_f/H_i$ as a function of the aspect ratio $a$.

Figure 8

Figure 9.(a) Experimental and numerical front position $L(t)$ of the collapse for $\ell _c= 2.8$ mm, $I_0 = 0.1$ and $a = 1$. The green area is obtained by varying the parameter ${\rm \Delta} \mu$ from 0 to 0.2, and the green line is the best agreement for the velocity and the run-out. (b) Final profiles for three values of ${\rm \Delta} \mu$.

Figure 9

Figure 10.(a) Numerical front position $L(t)$ of the collapse for $\ell _c= 2.8$ mm, ${\rm \Delta} \mu = 0.1$ and $a = 1$. The green area is obtained by varying the parameter $I_0$ from 0.001 to 0.2, and the green line is the best agreement for the velocity and the run-out. (b) Final profiles for three values of $I_0$.

Figure 10

Figure 11.Experimental and numerical front position $L(t)$ of the collapse for $\ell _c= 2.8$ mm, ${\rm \Delta} \mu = 0.12$, $I_0 = 0.3$ and $a = 1$.