Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T21:16:08.234Z Has data issue: false hasContentIssue false

Enhancement of wave transmissions in multiple radiative and convective zones

Published online by Cambridge University Press:  31 March 2021

Tao Cai*
Affiliation:
State Key Laboratory of Lunar and Planetary Sciences, Macau University of Science and Technology, Macau, PR China
Cong Yu*
Affiliation:
State Key Laboratory of Lunar and Planetary Sciences, Macau University of Science and Technology, Macau, PR ChinaSchool of Physics and Astronomy, Sun Yat-sen University, Zhuhai 519082, PR China
Xing Wei
Affiliation:
Department of Astronomy, Beijing Normal University, Beijing 100875, PR China
*
†Email addresses for correspondence: tcai@must.edu.mo, yucong@mail.sysu.edu.cn
†Email addresses for correspondence: tcai@must.edu.mo, yucong@mail.sysu.edu.cn

Abstract

In this paper, we study wave transmission in a rotating fluid with multiple alternating convectively stable and unstable layers. We have discussed wave transmissions in two different circumstances: cases where the wave is propagative in each layer and cases where wave tunnelling occurs. We find that efficient wave transmission can be achieved by ‘resonant propagation’ or ‘resonant tunnelling’, even when stable layers are strongly stratified, and we call this phenomenon ‘enhanced wave transmission’. Enhanced wave transmission only occurs when the total number of layers is odd (embedding stable layers are alternatingly embedded within clamping convective layers, or vice versa). For wave propagation, the occurrence of enhanced wave transmission requires that the clamping layers have similar properties, the thickness of each clamping layer is close to a multiple of the half-wavelength of the corresponding propagative wave and the total thickness of the embedded layers is close to a multiple of the half-wavelength of the corresponding propagating wave (resonant propagation). For wave tunnelling, we have considered two cases: tunnelling of gravity waves and tunnelling of inertial waves. In both cases, efficient tunnelling requires that the clamping layers have similar properties, the thickness of each embedded layer is much smaller than the corresponding e-folding decay distance and the thickness of each clamping layer is close to a multiple-and-a-half of the half-wavelength (resonant tunnelling).

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Plot of wave propagations in multiple convectively stable and unstable layers. Wave frequency ranges are shown above and below the middle arrow for convective and stable layers, respectively. Wave propagation occurs in the green region, tunnelling of inertial wave occurs in the blue region and tunnelling of gravity wave occurs in the purple region.

Figure 1

Figure 2.Plots of wave propagations in multiple convectively stable and unstable layers. (a) The convective layer is embedded between two stable layers. (b) The stable layer is embedded between two convective layers. Structure of the square of buoyancy frequency $N^2$ is shown by the side.

Figure 2

Figure 3.Transmission coefficient $\eta _{1}$ (the first part of (2.26)) for different $N_{1,2}^2/(2\varOmega )^2$ and $\sin ^2\alpha$ in a three-layer structure (one middle convective layer and two upper and lower neighbouring stable layers). The horizontal axis is $\cos ^2\theta$, and the vertical axis is $\sigma ^2/(2\varOmega )^2$. From the left to the right panels, $\sin ^2\alpha$ increases from 0.1 to 1.0. (a–c) Both stable layers are strongly stratified. (d–f) One stable layer is strongly stratified and the other is weakly stratified. (g–i) Both stable layers are weakly stratified. Wave propagation can only occur in coloured regions. Regions are left white if wave propagation is prohibited.

Figure 3

Figure 4.Transmission coefficient $\eta _{2}$ (the second part of (2.26)) for different $N_{1,2}^2/(2\varOmega )^2$ and $\sin ^2\alpha$ in a three-layer structure (one middle convective layer and two upper and lower neighbouring stable layers). The horizontal axis is $\cos ^2\theta$, and the vertical axis is $\sigma ^2/(2\varOmega )^2$. From the left to the right panels, $\sin ^2\alpha ^2$ increases from 0.1 to 1.0. (a–c) Both stable layers are strongly stratified. (d–f) One stable layer is strongly stratified and the other is weakly stratified. (g–i) Both stable layers are weakly stratified. Wave propagation can only occur in coloured regions. Regions are left white if wave propagation is prohibited.

Figure 4

Figure 5.Transmission ratios in multi-layer structures. For all the cases, $N_{m}^2/(2\varOmega )^2=10$ and $\sin ^2\alpha =1$, and the lowermost layer is stable; ${\rm \Delta} z_{s}={\rm \pi} /|s|$ for (a–f) but ${\rm \Delta} z_{s}=0.5{\rm \pi} /|s|$ for (g–i). In each case, all the convective layers have the same thickness ${\rm \Delta} z_{c}$ and wavenumber $q$, and all the stable layers have the same thickness ${\rm \Delta} z_{s}$ and wavenumber $s$. (a–c) The transmission ratio for a 101-layer structure with ${\rm \Delta} z_{c}=(1,0.35,0.1){\rm \pi} /|q|$. (d–f) The transmission ratio for a 102-layer structure with ${\rm \Delta} z_{c}=(1,0.35,0.1){\rm \pi} /|q|$. (g–i) Similar to (a–c) but with different ${\rm \Delta} z_{s}$. Wave propagation can only occur in coloured regions. Regions are left white if wave propagation is prohibited.

Figure 5

Figure 6.Two configurations of tunnelling of gravity and inertial waves. (a) Tunnelling of a gravity wave. Both top and bottom layers are stable. Gravity wave can propagate in the stable layer, but wave cannot propagate in the convective layer. (b) Tunnelling of an inertial wave. Both top and bottom layers are convective. Gravity wave can propagate in the convective layer, but wave cannot propagate in the stable layer.

Figure 6

Figure 7.Contour plots of transmission ratios for the tunnelling of a gravity wave in a three-layer structure. (a–c) Transmission ratios when the buoyancy frequency $N_{min}^2=10$, and ${\rm \Delta} z'_{1}=(0.1,1,10)/|\hat {q}_{1}|$. (d–f) Transmission ratios when the buoyancy frequency $N_{min}^2=1$, and ${\rm \Delta} z'_{1}=(0.1,1,10)/|\hat {q}_{1}|$. (g–i) Transmission ratios when the buoyancy frequency $N_{min}^2=0.1$, and ${\rm \Delta} z'_{1}=(0.1,1,10)/|\hat {q}_{1}|$. tunnelling of gravity waves can only occur in coloured regions. Regions are left white if tunnelling of gravity waves is prohibited.

Figure 7

Figure 8.Contour plots of transmission ratios for the tunnelling of a gravity wave in a multi-layer structure. The buoyancy frequency and thicknesses of the convective layers are all the same with the values of $N_{min}^2$ and ${\rm \Delta} z_{c}$, and the thicknesses of the stable layers are all the same with the value of ${\rm \Delta} z_{s}$. (a–c) Transmission ratios when the buoyancy frequency $N_{min}^2=10,1,0.1, {\rm \Delta} z_{c}=0.1/|\hat {q}|$, and ${\rm \Delta} z_{s}=0.5{\rm \pi} /|\hat {s}|$. (d–f) Transmission ratios when the buoyancy frequency $N_{min}^2=10,1,0.1, {\rm \Delta} z_{c}=0.1/|\hat {q}|$, and ${\rm \Delta} z_{s}={\rm \pi} /|\hat {s}|$. Tunnelling of gravity waves can only occur in coloured regions. Regions are left white if tunnelling of gravity waves is prohibited.

Figure 8

Figure 9.Contour plots of transmission ratios for the tunnelling of an inertial wave: (a,b,c) are for the three-layer structure; and (d–i) are for the multi-layer structures. (a–c) Transmission ratios for $N_{min}^2=10$ and ${\rm \Delta} z'_{1}=(0.1,1,10)/|\hat {s}|$ in a three-layer structure. (d–f) Transmission ratios for $N_{min}^2=(10,1,0.1), {\rm \Delta} z_{c}=0.5{\rm \pi} /|\hat {q}|$ and ${\rm \Delta} z_{s}=0.1/|s|$ in a 101-layer structure. (g–i) Transmission ratios for $N_{min}^2=(10,1,0.1), {\rm \Delta} z_{c}={\rm \pi} /|\hat {q}|$ and ${\rm \Delta} z_{s}=0.1/|s|$ in a 101-layer structure. Tunnelling of inertial waves can only occur in coloured regions. Regions are left white if Tunnelling of gravity waves is prohibited.

Figure 9

Figure 10.Plots of wave propagation in multiple convectively stable and unstable layers. Wave frequency ranges are shown above and below the middle arrow for convective and stable layers, respectively. Wave propagation occurs in the green region, tunnelling of inertial wave occurs in the blue region and tunnelling of gravity wave occurs in the purple region.

Figure 10

Figure 11.Wave transmissions with the traditional approximation. (a) Transmission for wave propagation. The setting is identical to that of figure 3(g) except that $\tilde {f}_{s}^2=0$ here. (b) Tunnelling of gravity waves. The setting is the same as that in figure 8(a) except that $\tilde {f}_{s}^2=0$ here. (c–e) Tunnelling of inertial waves. The settings are the same as those in figure 9(d–f) except that $\tilde {f}_{s}^2=0$ here. Coloured and white regions have similar meanings as those mentioned in previous contour plots.

Figure 11

Table 1.Summary on efficient wave transmissions in a multi-layer structure.