Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T14:50:51.129Z Has data issue: false hasContentIssue false

Kelvin wake pattern at small Froude numbers

Published online by Cambridge University Press:  31 March 2021

Ravindra Pethiyagoda
Affiliation:
School of Mathematical Sciences, Queensland University of Technology, Brisbane QLD 4001, Australia
Timothy J. Moroney
Affiliation:
School of Mathematical Sciences, Queensland University of Technology, Brisbane QLD 4001, Australia
Christopher J. Lustri
Affiliation:
Department of Mathematics, Macquarie University, Sydney NSW 2109, Australia
Scott W. McCue*
Affiliation:
School of Mathematical Sciences, Queensland University of Technology, Brisbane QLD 4001, Australia
*
†Email address for correspondence: scott.mccue@qut.edu.au

Abstract

The surface gravity wave pattern that forms behind a steadily moving disturbance is well known to comprise divergent waves and transverse waves, contained within a distinctive $V$-shaped wake. In this paper, we are concerned with a theoretical study of the limit of a slow-moving disturbance (small Froude numbers) in the absence of surface tension, for which the wake is dominated by transverse waves. Three configurations are considered: flow past a submerged source singularity, a submerged doublet and a pressure distribution applied to the surface. We treat the linearised version of these problems and use the method of stationary phase and exponential asymptotics to demonstrate that the apparent wake angle is less than the classical Kelvin angle and to quantify the decrease in apparent wake angle as the Froude number decreases. These results complement a number of recent studies for sufficiently fast-moving disturbances (large Froude numbers) where the apparent wake angle has been also shown to be less than the classical Kelvin angle. As well as shedding light on the issue of apparent wake angle, we also study the fully nonlinear problems for our three configurations under various limits to demonstrate the unique and interesting features of Kelvin wake patterns at small Froude numbers.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.(a–c) Plan view of the wave pattern for linear flow past a submerged source for Froude numbers $F=0.1$, $0.2$ and $1$. Only the single integral in (3.4) is used for the computation. (d–f) Equivalent images for flow past a submerged doublet, this time computed using the single integral term of (3.16). In (a,b) and (d,e), the dashed line indicates the wake angle defined by 20 % of the wave height. In (c,f), the dashed line is Kelvin's angle $\theta _{{wedge}}$. (g) A plot of wave height against angle ($\theta$) for flow past a point source (solid curves) and a doublet (dashed curves) given by (3.15) and (3.19), respectively, for the Froude numbers $F=0.2$ (blue, dashed orange), $F=0.1$ (green, dashed violet) and $F=0.05$ (red, dashed blue).

Figure 1

Figure 2.Plots of apparent wake angle against the Froude number. The solid curve represents Method I defined in § 2.5 using a 20 % cutoff height. The low-Froude-number results only consider the transverse waves of the stationary phase approximation. The apparent wake angles calculated from Method II are given by the marks with the large-Froude-number approximation given by the dashed line. The blue, red and yellow colours denote flow past a submerged source, submerged doublet and applied pressure distribution, respectively.

Figure 2

Figure 3.A contour plot of the positive heights of the free-surface profile for flow past a submerged source, in which there is a contour for every 10th percentile of the wave height within a single wavelength. The solid line is a line of constant $\mathrm {Re}(\chi )$ as given in (3.33), specifically (a) $\mathrm {Re}(\chi )= 1.0236$, (b) $\mathrm {Re}(\chi )= 1.1026$, (c) $\mathrm {Re}(\chi )= 1.4170$ and (d) $\mathrm {Re}(\chi )= 2.3602$. The dashed line is Kelvin's angle $\theta _{{wedge}}$ measured from the origin.

Figure 3

Figure 4.A contour plot of the positive heights of the free-surface profile for flow past a source with $F=0.1$, The contour is at 10 % of the wave height within a single wavelength. The solid line is given by $\mathrm {Re}(\chi )= 1.0236$. The dashed line is Kelvin's angle $\theta _{{wedge}}$.

Figure 4

Figure 5.A contour plot of the positive heights of the free-surface profile for flow past a submerged doublet, in which there is a contour for every 10th percentile of the wave height within a single wavelength. The solid line is a line of constant $\mathrm {Re}(\chi )$ as given in (3.33), specifically (a) $\mathrm {Re}(\chi )= 1.0236$, (b) $\mathrm {Re}(\chi )= 1.1026$. The dashed line is Kelvin's angle $\theta _{{wedge}}$.

Figure 5

Figure 6.(a–c) Plan view of the wave pattern for linear flow past a submerged source and sink, of equal strengths, separated a non-dimensional horizontal distance of (a) $\ell =1.89$ (constructive interference), (b) $\ell =1.97$ (no net interference) and (c) $\ell =2.01$ (destructive interference) for Froude number $F=0.2$. A superposition of the single integral in (3.4) is used for the computation. The dashed line indicates the wake angle defined by $\alpha =0.2$ for each of the point singularities. The surface height along the red curves in (a–c) are plotted in (d) against ray angle $\theta$.

Figure 6

Figure 7.A comparison of three different free-surface profiles for flow past a point source with $F=0.3$ and $\epsilon =0.1$. The different profiles are of; (a) the full nonlinear solution, (b) the linear solution, (c) the rigid lid approximation and (d) the difference between the nonlinear solution and the rigid lid approximation. In order to give a sense of the scale, the maximum surface heights in these images are (a) $6.27\times 10^{-4}$, (b) $5.50\times 10^{-4}$, (c) $6.27\times 10^{-4}$ and (d) $1.00\times 10^{-4}$. The nonlinear solution is presented on a $721\times 241$ mesh with $\Delta x=\Delta y=0.05$ and $x_0=-18$.

Figure 7

Figure 8.A free-surface profile for nonlinear flow past (a–c) a point source with $\epsilon F=2$, (d–f) a point doublet with $\mu F=1$ and (g–i) a pressure distribution with $\delta F^2=3$. All solutions are presented on a $721\times 361$ mesh with $\Delta x=\Delta y=0.033$ and $x_0=-12$.

Figure 8

Figure 9.Free-surface profiles for flow past (a,b) a submerged point source, (c,d) a submerged point doublet and (e,f) an applied pressure distribution for Froude number $F=0.3$. Both weakly nonlinear and (a,c,e) highly nonlinear (b,d,f) solutions shown. The maximum gradient of the surface elevation along the centreline for each case is approximately (a) $0.02^\circ$, (b) $32^\circ$, (c) $0.3^\circ$, (d) $25^\circ$, (e) $5^\circ$ and (f) $35^\circ$. All solutions are presented on a $721\times 241$ mesh with $\Delta x=\Delta y=0.05$ and $x_0=-18$.

Figure 9

Figure 10.A plot of the height of the initial peak (blue) and the first peak of the wave train (red) against the key parameter ($\epsilon$, $\mu$ or $\delta$) for flow past (a,b) a submerged source, (c,d) a submerged doublet and (e,f) an applied pressure distribution. Plots in (a,c,e) are for $F=0.2$ while those in (b,d,f) are for $F=0.3$. The dashed line is the Stokes limiting height, $\zeta =F^2/2$.