Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T18:10:08.509Z Has data issue: false hasContentIssue false

Contactless rebound of elastic bodies in a viscous incompressible fluid

Published online by Cambridge University Press:  24 May 2022

G. Gravina
Affiliation:
Department of Mathematical Analysis, Faculty of Mathematics and Physics, Charles University, Sokolovska 83, 186 75 Prague, Czech RepublicDepartment of Mathematics, Temple University, Philadelphia, PA 19122, USA
S. Schwarzacher*
Affiliation:
Department of Mathematical Analysis, Faculty of Mathematics and Physics, Charles University, Sokolovska 83, 186 75 Prague, Czech Republic
O. Souček
Affiliation:
Mathematical Institute, Faculty of Mathematics and Physics, Charles University, Sokolovska 83, 186 75 Prague, Czech Republic
K. Tůma
Affiliation:
Mathematical Institute, Faculty of Mathematics and Physics, Charles University, Sokolovska 83, 186 75 Prague, Czech Republic
*
†Email address for correspondence: schwarz@karlin.mff.cuni.cz

Abstract

In this paper, we investigate the phenomenon of particle rebound in a viscous incompressible fluid environment. We focus on the important case of no-slip boundary conditions, where it is now well established that collisions cannot occur in finite time under certain assumptions. In a simplified framework, we provide conditions which allow us to prove that rebound is possible even in the absence of a topological contact. Our results lead to the conjecture that a qualitative change in the shape of the solid is necessary to obtain a physically meaningful rebound in fluids. We support the conjecture by comparing numerical simulations performed for the reduced model with finite element solutions obtained for corresponding well-established partial differential equation systems describing elastic solids interacting with incompressible fluids.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.A spherical shell with an inner mass–spring system is surrounded by a viscous incompressible fluid.

Figure 1

Figure 2.Schematic representation of contactless rebound for a deformable shell with an inner energy storing mechanism. The dash-dotted line represents the undeformed surface.

Figure 2

Figure 3.Natural logarithm of the drag force shape factor based on the Reynolds approximation (a,c) and on the analytical estimate (b,d) for $N = 2$ (a,b) and $N = 3$ (c,d).

Figure 3

Figure 4.Distance to wall $h$ as a function of time for: rigid shell model without an internal spring (a,b), rigid shell model with an internal spring (c,d) and deformable shell model with an internal spring (e, f). Colours distinguish cases with different fluid viscosities. In panels (a,c,e), we show the evolution over time interval $(0,1)\,\mathrm {s}$, while in panels (b,d, f), we present a zoom-in to the vicinity of the rebound instant.

Figure 4

Figure 5.A comparison of the level set $\chi _\varepsilon$ and the focused interpolating function $\tilde {\chi }_\delta$ for a one-dimensional case.

Figure 5

Figure 6.Panels (a–c) show: left half – magnitude of velocity (colours) and the vectorial velocity field (arrows), right half – level set at the stage of (a) moving down at $t=0.047$ s, (b) shortly before rebound at $t=0.224$ s, (c) moving up at $t=0.736$ s. The white contour depicts the interface where the value of the level-set function is equal to 0.5. interpreted as the position of the fluid–solid interface.

Figure 6

Figure 7.Left half: pressure in the fluid at the time of rebound ($t=0.248$ s). Right half: computational mesh refined in the vicinity of the contact zone. The white line represents the $0.5$-level set, interpreted as the position of the fluid–solid interface.

Figure 7

Figure 8.(a,b) Detailed zoom of the material parameters and the computational mesh close to the wall at the instant of rebound – shear modulus $G$ (a) and viscosity $\mu$ (b). (c,d) Profiles of the material parameters along the profile given by the white line in panels (a,b): shear modulus $G$ (c) and viscosity $\mu$ (d). Note that the material is purely viscous to the distance of approximately 0.001 $\mathrm {m}$ from the wall.

Figure 8

Figure 9.(a) Fit of the shape of the closest-to-contact part of the particle in the FSI simulation by the function (4.25) – in particular, the dependence of the exponent $\alpha$ and the prefactor $d$ on the minimal distance to the wall $h$. (b) Several snapshots of the 0.5-level-set positions (points) extracted from the simulation data together with the fitted curves (red: $t=0.047$ s, green: $t=0.119$ s, blue: $t=0.177$ s, orange: $t=0.248$ s). The snapshots correspond to the times preceding the bounce. Both figures refer to the case with $\mu =0.2\,\mathrm {Pa}\,\mathrm {s}$.

Figure 9

Figure 10.Comparison of numerically obtained solutions with the reduced ODE model corresponding to the deformable shell with an internal spring (a) and finite element method (FEM) solutions of the full FSI model (b).