Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:13:34.859Z Has data issue: false hasContentIssue false

Low-Frequency Noise in SiO2 /AlGaN/GaN Heterostructures on SiC and Sapphire Substrates

Published online by Cambridge University Press:  13 June 2014

N. Pala
Affiliation:
Department of ECSE, Rensselaer Polytechnic Institute, Troy, New York 12180, USA
R. Gaska
Affiliation:
Department of ECSE, Rensselaer Polytechnic Institute, Troy, New York 12180, USA
M. Shur
Affiliation:
Department of ECSE, Rensselaer Polytechnic Institute, Troy, New York 12180, USA
J. W Yang
Affiliation:
Department of ECE, University of South Carolina, Columbia, South Carolina 29208, USA
M. Asif Khan
Affiliation:
Department of ECE, University of South Carolina, Columbia, South Carolina 29208, USA

Abstract

The low-frequency noise in GaN-based Metal-Oxide-Semiconductor Heterostructure Field Effect Transistors (MOS-HFETs) and HFETs on sapphire and n-SiC substrates were studied. Hooge parameter at zero gate bias was calculated about 8 × 10−4 for both types of the devices. The AlGaN/GaN MOS-HFETs exhibited extremely low gate leakage current and much lower noise at both positive and negative gate biases. These features demonstrate the high quality of the SiO2/AlGaN heterointerface and feasibility of this technology for high-power microwave transmitter and high-power, high-temperature switches.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Fig. 1.Schematics of AlGaN/GaN HFET and MOS-HFET structures.

Figure 1

Fig. 2.Comperative input characteristics of the MOS-HFET and base line HFET.

Figure 2

Fig. 3Frequency dependence of Spectral Noise Density (SND) in MOS-HFET and HFET structures on sapphire. Vd = 0.5V S/D=30 μm

Figure 3

Fig. 4.. Gate bias dependence of the noise density at f = 200 Hz and the gate current in MOS-HFET and HFET on (a) sapphire (b) n-SiC. Vd = 0.5 V. Also shown the threshold voltages Vt1 and Vt2 , for MOS-HFET and HFET, respectively.

Figure 4

Fig. 5Variation of the SND with the modulation of the substrate voltage VSub applied on the n-SiC .1)VSub = −4V, 2) VSub = +2V, 3) VSub = −2V, 4) VSub = 0V