Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T09:30:17.695Z Has data issue: false hasContentIssue false

CRYSTAL STRUCTURE AND DEFECTS IN NITROGEN-DEFICIENT GaN

Published online by Cambridge University Press:  13 June 2014

S. Oktyabrsky
Affiliation:
* NYS Center for Advanced Technology, State University of New York at Albany, Albany, NY 12203,
V. Joshkin
Affiliation:
** Department of Electrical and Computer Engineering, University of Wisconsin, Madison, WI, 53706

Abstract

We have studied crystal structure and associated defects in GaN films grown on sapphire under nitrogen-deficient conditions by metalorganic chemical vapor deposition (MOCVD) and pulsed laser deposition (PLD). The structural quality of the PLD films grown at 750 °C was comparable with those grown by MOCVD at 1050 °C having threading dislocations density of about 1010 cm−2 at a film thickness 150-200 nm. Microstructure of the PLD films grown at temperatures above 780°C was found to be similar to that of nitrogen-deficient MOCVD films indicating the loss of nitrogen due to thermal decomposition of the nitride layers. Nitrogen-deficient MOCVD and PLD films exhibit polycrystalline structure with a mixture of cubic zinc-blende and wurtzite hexagonal GaN grains retaining tetragonal bonding across the boundaries and hence the epitaxial orientations and polarity. Renucleation of the wurtzite phase at different {111} planes of cubic GaN results in a rough and faceted surface of the film. Most of the stoichiometric films displayed (0001) Ga-face polarity, but the renucleated inclined wurtzite grains grew in the opposite N-face polarity. The major defects related to the cubic structural metastability are stacking faults and microtwins which being nuclei of the metastable cubic phase have an extremely low energy. We elucidate that the cubic phase is more stable under the nitrogen deficiency and, therefore, can exist without decomposition at higher nitrogen vacancy concentrations in the material.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig. 1.TEM cross-sectional micrographs of the MOCVD-grown GaN at Ga-rich (a) and N-rich (b) conditions.

Figure 1

Fig. 2.TEM cross-sectional micrographs of the PLD-grown GaN films at 750 °C (a) and 780 °C (b).

Figure 2

Fig.3.TEM images in [110] projection of the GaN films: (a) N-deficient MOCVD showing both wurtzite (W) and zinc-blende (ZB) grains; the insets: ED patterns from a wurtzite grain oriented with c-axis normal to the surface (not shown in the image), from misori-ented "W"-grain, and "ZB"-grain; (b) grown by PLD at 780°C showing the mixture of wurtzite and zinc-blende GaN phases; the inset: micro-diffraction pattern of a small GaN grain with cubic symmetry in a (110) zone.

Figure 3

Fig. 4.Two possible orientations of zinc-blende cubic phase that can nucleate on the (0001) hexagonal wurtzite surface.