Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T14:56:18.294Z Has data issue: false hasContentIssue false

Secondary generation of breaking internal waves in confined basins by gravity currents

Published online by Cambridge University Press:  30 April 2021

Yukinobu Tanimoto*
Affiliation:
The Bob and Norma Street Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305, USA
Nicholas T. Ouellette
Affiliation:
The Bob and Norma Street Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305, USA
Jeffrey R. Koseff
Affiliation:
The Bob and Norma Street Environmental Fluid Mechanics Laboratory, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305, USA
*
†Email address for correspondence: ytanimoto@stanford.edu

Abstract

In confined stratified basins, wind forcing is an important mechanism responsible for the onset and generation of internal waves and seiches. Previous observations have also found that gravity currents in stratified environments can also initiate internal waves. We conducted a series of laboratory experiments to investigate the generation of internal motions due to such dense gravity currents on an incline entering a two-layer stratification, focusing in particular on the interaction between the onset of internal motions and topography and diapycnal mixing due to breaking internal waves. The baroclinic response of the ambient stratification to the gravity current is found to be analogous to a system forced by a surface wind stress, and the response as characterized by a Wedderburn-like number was found to be linearly proportional to the initial gravity current Richardson number. The generated internal motions are characterized as having a low-frequency internal surge and higher-frequency progressive internal waves. The overall mixing efficiency of the breaking internal wave was calculated and found to be low compared with similar previous studies.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of a two-layer stratified lake system under a sustained wind forcing with shear velocity $u_*$.

Figure 1

Figure 2.Schematic of the facility and measurement instrumentation. The blue dotted-line box shows the region where PLIF was conducted, and the two red boxes show the fields of view of the cameras used to image the tracer dye.

Figure 2

Table 1.Parameters for the different experimental runs. Here $\rho _1$ and $\rho _2$ are the densities of the upper and lower ambient layers, $\rho _3$ is the gravity current density and $h_0$ is the gate opening at the lock. The Richardson number of the gravity current is $Ri_{\rho }$ (see text for definition).

Figure 3

Figure 3.Experimental snapshots at $t=34$ s (a) and 46 s (b) of $Ri_{\rho }=1.96$ (run 4-V) of an underflow dominated locked wave interacting with the back wall.

Figure 4

Figure 4.Experimental snapshots at $t=46$ s (a) and 55 s (b) of $Ri_{\rho }=5.49$ (run 9-V) of an interflow dominated launched wave interacting with the back wall. The pycnocline perturbation is well ahead of the gravity current fluid.

Figure 5

Figure 5.Experimental images from two combined cameras showing the progression of the gravity current and pycnocline response for $Ri_{\rho }=1.55$ (run 1-V). Snapshots are shown for $t=32$ s (a), 43 s (b), 70 s (c) and 99 s (d).

Figure 6

Figure 6.Temporal response of the pycnocline (a) positioned 20 cm downstream from where the pycnocline originally meets the slope obtained from a virtual PLIF wave gauge, and the associated continuous wavelet transform (b) where the colours indicate the power spectral density (PSD), for $Ri_{\rho }=2.06$ (run 2-P).

Figure 7

Figure 7.Normalized amplitude of the first observed internal wave as a function of $Ri_{\rho }$.

Figure 8

Figure 8.Experimental snapshots of $Ri_{\rho }=1.55$ (run 1-V) showing the formation of nodules along the pycnocline. Red solid and blue hollow arrows indicate certain nodules observed in the flow. The snapshots are at $t=81$ s (a), 135 s (b), 153 s (c) and 183 s (d).

Figure 9

Figure 9.Experimental snapshots of wave breaking for $Ri_{\rho }=1.96$ (run 4-V), at $t=106$, 117, 121 and 129 s. The lower layer surge is seen receding during this time.

Figure 10

Figure 10.Experimental snapshots of wave breaking for $Ri_{\rho }=3.32$ (run 6-V) at $t=114$, 127, 137 and 146 s. The lower layer surge is receding in panels (a–c) but is progressing in panel (d), affecting the wave breaking.

Figure 11

Figure 11.Normalized average bolus propagation speeds plotted against wave Froude number and wave steepness (red), along with experimental data from Moore et al. (2016) (blue), reproduced with permission.

Figure 12

Figure 12.Normalized density profiles obtained for $Ri_{\rho }=1.61$ (run 1-P), centred around the vertical location of the interface. The initial profile prior to breaking is taken with PLIF at $t=106$ s, and the final profile with the CT probe two hours after the experiment.

Figure 13

Figure 13.Time series of different interfacial displacement components using the spectral filtering method of Boegman et al. (2005a), for $Ri_{\rho }=1.61$ (run 1-P). The original displacements are obtained from PLIF.

Figure 14

Table 2.Comparison of overall mixing efficiencies from previous studies. DNS, direct numerical simulation.

Figure 15

Figure 14.Hovmoller diagram of a transect from the back wall of the tank for $Ri_{\rho }=1.96$ (run 4-V), the pycnocline location is denoted in red.

Figure 16

Figure 15.Here ${W^{-1}_{GC}}$ plotted as a function of the initial Richardson number of the gravity current ($Ri_{\rho }$). Errors propagated from the uncertainty in the measurements are smaller than the symbol size.

Figure 17

Figure 16.Time series of the interface deflection and thickness from PLIF for $Ri_{\rho }=1.61$ (run 1-P).