Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T19:26:18.628Z Has data issue: false hasContentIssue false

Monitoring and Controlling of Strain During MOCVD of AlGaN for UV Optoelectronics

Published online by Cambridge University Press:  13 June 2014

Abstract

The grown-in tensile strain, due to a lattice mismatch between AlGaN and GaN, is responsible for the observed cracking that seriously limits the feasibility of nitride-based ultraviolet (UV) emitters. We report in-situ monitoring of strain/stress during MOCVD of AlGaN based on a wafer-curvature measurement technique. The strain/stress measurement confirms the presence of tensile strain during growth of AlGaN pseudomorphically on a thick GaN layer. Further growth leads to the onset of stress relief through crack generation. We find that the growth of AlGaN directly on low-temperature (LT) GaN or AlN buffer layers results in a reduced and possibly controllable strain.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Schematic diagrams of a blue laser diode (a) and a UV LED (b). The indium-containing layers are labeled in blue and the AlGaN layers are colored in red. (c) Strain-thickness product along the growth direction for the structures of (a) (dashed line) and (b) (solid yellow line). InGaN layers tend to move the curve toward blue (compression) and AlGaN layers to red (tension).

Figure 1

Figure 2.(a) Top view of an etched circular mesa (100 μm diameter) showing the presence of a high density of cracks. (b) Diode I-V curves taken from various devices across the same cracked sample.

Figure 2

Figure 3Stress-thickness product and reflectance versus thickness during growth of AlGaN (Al∼0.15) on a 0.6 μm GaN layer

Figure 3

Figure 4Stress-thickness product and reflectance versus thickness during growth of AlGaN (Al∼0.17) directly on a LT GaN buffer on sapphire

Figure 4

Figure 5Stress-thickness product and reflectance versus thickness during growth of AlGaN (Al∼0.17) directly on a LT AlN buffer on sapphire