Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:45:13.477Z Has data issue: false hasContentIssue false

Steady-state harmonic resonance of periodic interfacial waves with free-surface boundary conditions based on the homotopy analysis method

Published online by Cambridge University Press:  21 April 2021

Jiyang Li
Affiliation:
School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China
Zeng Liu*
Affiliation:
School of Naval Architecture and Ocean Engineering, Huazhong University of Science and Technology (HUST), Wuhan, Hubei 430074, PR ChinaHubei Provincial Engineering Research Center of Data Techniques and Supporting Software for Ships (DTSSS), Wuhan, Hubei 430074, PR China
Shijun Liao
Affiliation:
School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR ChinaState Key Laboratory of Plateau Ecology and Agriculture, Xining 810018, PR ChinaSchool of Hydraulic and Electric Engineering, Qinghai University, Xining 810018, PR China
Alistair G.L. Borthwick
Affiliation:
School of Engineering, University of Edinburgh, Edinburgh EH9 3FB, UKSchool of Engineering, Computing and Mathematics, University of Plymouth, Plymouth PL4 8AA, UK
*
†Email address for correspondence: z_liu@hust.edu.cn

Abstract

We investigate the steady-state harmonic resonance of periodic interfacial gravity waves in a two-layer fluid with free surface. Two independent ‘external’ and ‘internal’ modes with separate linear dispersion relationships exist for this two-layer fluid. Exact harmonic resonance occurs when an external mode and an internal mode share the same phase speed and have an integer ratio of wavelengths. The singularity or small divisor caused by the exactly or nearly resonant component is successfully removed by the homotopy analysis method (HAM). Convergent series solutions are obtained of steady-state interfacial wave groups with harmonic resonance. It is found that steady-state resonant waves form a continuum in parameter space. For finite amplitude interfacial waves, the energy carried by surface waves mirrors that carried by interface waves as the water depth varies. As the upper layer depth increases, energy carried by both surface and interface waves transfers from the shorter resonant component to the longer primary one. The paper utilizes a HAM-based analytical approach to obtain a steady-state, periodic, interfacial wave system with exact- and near-resonant interactions between internal and external modes.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Physical sketch of the two-fluid system with related notations.

Figure 1

Figure 2.The solid curves represent the relationship between density ratio $\varDelta$ and upper-layer depth parameter $kh$ satisfying the $1:N$ exact resonance condition (2.31) for $\textrm {d}\omega =0$.

Figure 2

Figure 3.Variation in wave amplitude $|kC^{\eta _j}_{i}|$ with upper-layer depth parameter $kh$ for $\varDelta =0.1$ and $\epsilon =1.0002$. Exact resonance occurs at $kh=0.675$.

Figure 3

Table 1.Wave steepness of free surface $H_{s1}$ and interface $H_{s2}$ versus dimensionless angular frequency $\epsilon$ when $\varDelta =0.1$ and $kh=0.675$ for $1:2$ exact resonance.

Figure 4

Figure 4.Variation in proportional energy contributions carried by (a) surface and interface waves, and (b) primary and resonant components with dimensionless angular frequency $\epsilon$, for $\varDelta =0.1$ and $kh=0.675$ corresponding to $1:2$ exact resonance.

Figure 5

Figure 5.Variations in (a) wave amplitude $|kC^{\eta _j}_{i}|$ and spatial profiles of (b) free surface $z=\zeta _1$ and (c) interface $z=-h+\zeta _2$ at $t=0\ \textrm {s}$ with dimensionless angular frequency $\epsilon$, for $\varDelta =0.1$ and $kh=0.675$ corresponding to $1:2$ exact resonance.

Figure 6

Figure 6.Variations of energy proportion in (a) surface and interface waves, and (b) primary and resonant components with upper-layer depth parameter $kh$ when $\varDelta =0.1$ and $\epsilon =1.05$. The square symbols indicate $1:2$ exact resonance.

Figure 7

Figure 7.Variations in (a) wave amplitude $|kC^{\eta _j}_{i}|$, and spatial profiles of (b) free surface $z=\zeta _1$ and (c) interface $z=-h+\zeta _2$ at $t=0$ s with upper-layer depth parameter $kh$ when $\varDelta =0.1$ and $\epsilon =1.05$. The square symbols indicate $1:2$ exact resonance.

Figure 8

Figure 8.Vertical profile of the horizontal fluid particle velocity component: (a) $u=u_{ch}+u_{sh}$ in both layers, and (b) hyperbolic cosine contribution $u_{ch}$ and (c) hyperbolic sine contribution $u_{sh}$ in the upper layer at the crest of the surface wave at $t=0$ s, with the upper-layer depth parameter $kh$ when $\varDelta =0.1$ and $\epsilon =1.05$.

Figure 9

Figure 9.Variation in wave amplitude $|kC^{\eta _j}_{i}|$ with upper-layer depth parameter $kh$, when $\varDelta =0.1$ and $\epsilon =1.0002$. The superimposed square symbols indicate $1:3$ exact resonance.