Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T02:31:39.187Z Has data issue: false hasContentIssue false

Hypersonic turbulent boundary layer over the windward side of a lifting body

Published online by Cambridge University Press:  03 June 2024

Siwei Dong
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
Ming Yu*
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
Fulin Tong
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
Qian Wang
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
Xianxu Yuan*
Affiliation:
State Key Laboratory of Aerodynamics, Mianyang 621000, PR China
*
†Email addresses for correspondence: yum16@tsinghua.org.cn, yuanxianxu2023@163.com
†Email addresses for correspondence: yum16@tsinghua.org.cn, yuanxianxu2023@163.com

Abstract

In the present study, we performed direct numerical simulations for a hypersonic turbulent boundary layer over the windward side of a lifting body, the HyTRV model, at Mach number $6$ and attack angle 2$^{\circ }$ to investigate the global and local turbulent features, and evaluate its difference from canonical turbulent boundary layers. By scrutinizing the instantaneous and averaged flow fields, we found that the transverse curvature on the windward side of the HyTRV model induces the transverse opposing pressure gradients that push the flow on both sides towards the windward symmetry plane, yielding significant effects of the azimuthal inhomogeneity and large-scale cross-stream circulations, moderate and azimuthal independent influences of adverse pressure gradient, and negligible impact of the mean flow three-dimensionality. Further inspecting the local turbulent statistics, we identified that the mean and fluctuating velocity become increasingly similar to the highly decelerated turbulent boundary layers over flat plates in that the mean velocity deficit is enhanced, and the outer layer Reynolds stresses are amplified as it approaches the windward symmetry plane, and prove to be self-similar under the scaling of Wei & Knopp (J. Fluid Mech., vol. 958, 2023, A9) for adverse-pressure-gradient turbulent boundary layers. Conditionally averaged Reynolds stresses based on strong sweeping and ejection events demonstrated that the Kelvin–Helmholtz instability of the strong embedded shear layer induced by the large-scale cross-stream circulations is responsible for the turbulence amplification in the outer layer. The strong Reynolds analogy that relates the mean velocity and temperature was refined to incorporate the non-canonical effects, showing considerable improvements in the accuracy of such a formula. On the other hand, the temperature fluctuations are still transported passively, as indicated by their resemblance to the velocity. The conclusions obtained in the present study provide potentially profitable information for turbulent modelling modification for the accurate predictions of skin friction and wall heat transfer.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of the HyTRV: (a) side view, (b) front view, (c) grid distribution in a $(y,z)$ plane.

Figure 1

Figure 2.The grid intervals in wall units in (a) the streamwise direction at $\phi =140^{\circ }$, $160^{\circ }$ and $180^{\circ }$, and (b) the azimuthal direction at $x=1050$, 1250 and 1450 mm. The variation of line colours from light to deep represents the increase of $\phi$ in (a) and $x$ in (b).

Figure 2

Figure 3.Streamwise variations of (a) the friction Reynolds number $Re_\tau$, and (b) the momentum Reynolds number $Re_\theta$.

Figure 3

Figure 4.Instantaneous (a) $u_\xi$ and (b) $T$ at $x=1250$ mm. White dashed lines indicate the edge of the boundary layer. Solid black lines indicate (a) 0.9$q_{\infty }$ and (b) $2.5T_{\infty }$. The wall-normal extent is truncated for a better view.

Figure 4

Figure 5.Distributions of (a) the azimuthal mean velocity $\bar {u}_{\zeta }$ at $x=1250$ mm overlaid by the streamlines and the wall-normal profiles of the mean crossflow velocity $\bar {u}_n$ normalized by (b) outer and (c) viscous scales.

Figure 5

Figure 6.(a) Skin friction $C_f$ (flooded contour) overlaid by the wall limiting streamlines. (b) Streamwise variations of $C_f$. (c) Transformed incompressible skin friction $C_{f,i}$ along the four wall limiting streamlines in (a).

Figure 6

Figure 7.(a) Mean wall heat flux $\bar {Q}_w$ (flooded contour) overlaid by the wall limiting streamlines.(b) Streamwise variations of $\bar {Q}_w$. (c) The Reynolds analogy factor $R_{af}$ along the four wall limiting streamlines in (a). Dashed and dash-dotted lines represent, respectively, $Pr^{-2/3}$ and 1.16.

Figure 7

Figure 8.Distributions of (a) $\gamma _{v,e}$ and $\gamma _{\tau _w}$ in the azimuthal direction at $x=1050$, 1250 and 1450 mm. Colour from light to dark represents increasing $x$. (b) Twist angle $\gamma _v-\gamma _{v,e}$ at $x=1250$ mm in the wall-normal direction.

Figure 8

Figure 9.Distributions of the mean wall pressure $\bar {p}_w$ (a) on the lower wall of the HyTRV, (b) in the azimuthal direction at $x=1050$, 1250 and 1450 mm, and (c) along the streamwise direction in meridian planes ${\phi =140^{\circ }}$ and $180^{\circ }$, with the parameter $\beta _K$ shown in the inset, and dashed lines denoting the boundaries of the blowing/suction slot.

Figure 9

Figure 10.Intensities of wall pressure fluctuations in the mixing scaling along the four limiting streamlines (lines 1–4) represented by symbols with increasingly lighter colours.

Figure 10

Figure 11.Wall-normal distributions of the mean velocity integrated by (a,b) the van Driest transformation, (c,d) the total-stress-based transformation (Griffin et al.2021), and (e,f) the transformation incorporating intrinsic compressibility effects (Hasan et al.2023), in meridian planes (a,c,e) $\phi =140^{\circ }$ and (b,d,f) $\phi =180^{\circ }$. Insets are the enlarged views in the viscous layer.

Figure 11

Figure 12.Mean velocity deficit profiles in meridian planes (a,c,e) $\phi =140^{\circ }$ and (b,d,f) $\phi =180^{\circ }$ expressed as (a,b) $1-\bar {u}_{\xi,VD}/\bar {u}_{\xi,VD,e}$, (c,d) $1-\bar {u}_{\xi,TS}/\bar {u}_{\xi,TS,e}$, and (e,f) $(\tilde {u}_{\xi,e}-\tilde {u}_{\xi })/u_{ZS}$, with $u_{ZS}$ the Zagarola–Smits velocity scale.

Figure 12

Figure 13.Wall-normal distributions of the Reynolds stresses against the semi-local coordinate $\eta ^+_{TL}$, for (a,b) $R^+_{11}$, (c,d) $R^+_{22}$, (e,f) $R^+_{33}$, (g,h) $-R^+_{12}$, with (a,c,e,g) $x=1250$ mm and various azimuthal angles ($\phi =130^{\circ }$ to the WSP), and (b,d,f,h) in the WSP from $x=1050$ to 1450 mm.

Figure 13

Figure 14.Instantaneous velocity fluctuations $u'^+_\xi$ in the $(\xi,\zeta )$ planes at (a) $\eta ^+ = 15$, (b) $\eta =0.3 \delta$,(c) $\eta =0.6 \delta$.

Figure 14

Figure 15.Wall-normal distributions of (a) $R_{11}/u_{ZS}^2$ and (b) $R_{22}/u_{ZS}^2$ in the WSP from $x=1050$ to 1450 mm.

Figure 15

Figure 16.Wall-normal distributions of (a) velocity deficit $\bar {u}^*_{\xi }$, (b) Reynolds shear stress $R_{12}^*$ and(c) streamwise Reynolds normal stress $R_{11}^*$.

Figure 16

Figure 17.Mean velocity gradient $\bar \rho \,\textrm {d} \tilde u_{\xi }/\textrm {d}\eta$ in the WSP at different streamwise stations.

Figure 17

Figure 18.Wall-normal distributions of the tangential Reynolds stresses $-\overline {u_{\xi }'u_{\eta }'}^+$ carried by ejection (Q2, $u_{\xi }'<0, u_{\eta }'>0$) and sweeping (Q4, $u_{\xi }'>0, u_{\eta }'<0$) events, the mean velocity $\bar {u}_{\xi }/q_{\infty }$ and the normalized streamwise velocity fluctuation intensity $\overline {u_{\xi }'^{2}}/\overline {(u_{\xi }'^{2})}_{max}$ in meridian planes (a) $\phi =160^{\circ }$ and (b) $\phi =180^{\circ }$ at $x=1050$ mm.

Figure 18

Figure 19.The streamwise variations of the decomposed skin friction components in meridian planes(a) $\phi =140^{\circ }$ and (b) $\phi =180^{\circ }$ (WSP).

Figure 19

Figure 20.The skin friction contributed by the canonical portion and the outer embedded shear layer to(a) $C_{f,T}$ and (b) $C_{f,V}$ in the WSP.

Figure 20

Figure 21.(a) Wall-normal profiles of $\bar {T}/T_{\infty }$, (b,c) $\bar {T}/\bar {T}_e$ as a function of $\bar u_{\xi }/\bar u_{\xi,e}$, and (d) $\bar {T}/\bar {T}_{0.7\delta }$ as a function of $\bar u_{\xi }/\bar u_{\xi,0.7\delta }$, in meridian planes $\phi =140^{\circ }$, $160^{\circ }$ and $180^{\circ }$ at $x=1250$ mm. Dashed lines in (b) and (c,d) are, respectively, the mean temperature–velocity relationships predicted by Walz's equation and the generalized Reynolds analogy (GRA).

Figure 21

Figure 22.The same as figure 21(c), with the dashed lines being the mean temperature–velocity relationships predicted by the modified GRA (5.3).

Figure 22

Figure 23.Wall-normal distributions of (a) temperature fluctuation intensity $T^+_{rms}$, (b) left-hand side of (5.5), (c) turbulent heat flux $\overline {\rho u''_\eta T''}^+$, (d) turbulent Prandtl number $Pr_t$, at $x=1250$ mm.