Hostname: page-component-74656f9884-npj9w Total loading time: 0 Render date: 2026-11-07T04:21:20.137Z Has data issue: false hasContentIssue false
  • English
  • Français

Determination of the true projected contact area by in situ indentation testing — ERRATUM

Published online by Cambridge University Press:  26 November 2019

Gaylord Guillonneau ,
Jeffrey M. Wheeler ,
Juri Wehrs ,
Laetitia Philippe ,
Paul Baral ,
Heinz Werner Höppel ,
Mathias Göken  and
Johann Michler

Abstract

An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.

Information

Type
Erratum
Information
Journal of Materials Research , Volume 34 , Issue 24 , 30 December 2019 , pp. 4086
Copyright
Copyright © Materials Research Society 2019 

Doi:10.1557/jmr.2019.236, published by Materials Research Society with Cambridge University Press, 30 August, 2019

In the originally published article [Reference Guillonneau, Wheeler, Wehrs, Philippe, Baral, Höppel, Göken and Michler1], there were a number of errors detailed below.

Dr. Laetitia Phillippe’s name was misspelled. The misspelling has since been corrected.

In the abstract, the fourth sentence should have read: “The in situ projected contact area measured by Scanning Electron Microscopy using a cube-corner tip differs significantly from the classical models for materials with low H/E modulus ratio.” The abstract has since been corrected.

The label in Figure 8(b) has been corrected and appears below.

On page 2861, first column, the reference citation for sentence “Finally, let us note that numerical simulations were also used to estimate the true projected contact area” should be “[12, 13, 26]”.

On page 2866, second column, the sentence beginning “The projected contact area at maximum load…” should refer to the section “Method to calculate the in situ contact area”.

Reference 10 is incomplete. The complete reference 10 is:

J.L. Loubet, J.M. Georges, and G. Meille: Vickers indentation curves of elastoplastic materials. In Microindentation Techniques in Materials Science and Engineering, American Society for Testing Materials, P. Blau and B. Lawn, eds. (West Conshohocken, PA: ASTM International, 1986); pp. 72–89.

Reference 14 is incomplete. The complete reference 14 is:

J.L. Loubet, M. Bauer, A. Tonck, S. Bec, and B. Gauthier- Manuel: Nano-indentation with a surface force apparatus. NATO Adv. Study Inst. Ser., Ser. E 429, 429–447 (1993).

Reference 16 is incomplete. The complete reference 16 is:

G. Guillonneau: Nouvelles Techniques de Nano-Indentation Pour Des Conditions Expérimentales Difficiles: Très Faibles Enfoncements, Surfaces Rugueuses, Température. PhD. thesis, Ecully, Ecole centrale de Lyon, 2012.

Reference 25 should not have been included. In-text citations to reference 25 should be to reference 12.

The publisher apologizes for these errors.

References

Reference:

Guillonneau, G., Wheeler, J.M., Wehrs, J., Philippe, L., Baral, P., Höppel, H.W., Göken, M., and Michler, J.: Determination of the true projected contact area by in situ indentation testing. J. Mater. Res. 34, 2859 (2019).CrossRefGoogle Scholar